The matte gray Schoeps Colette CMC 1 Microphone Amp and MK 2H Omni Condenser Capsule (Stereo Set) is a matched pair of ultracompact, space-saving Colette Series modular omnidirectional condenser microphones designed to provide a gentle treble rise above 6 kHz at 0° along with transparent, low-distortion sound pickup, making the set an ideal choice for achieving a natural sound when miking instruments and orchestras at medium distances.

It includes two CMC 1 (XLR 3-pin output) miniature microphone amplifiers, two matched MK 2H omnidirectional condenser capsules, two stand clamps, two foam windscreens, a certificate of matching, a cable strap, and a premium case. Thanks to the inclusion of the ultracompact CMC 1, this bundle serves as a lighter and smaller alternative to the CMC 6 without compromising sonic performance.

Matched Pair for Precise Stereo Miking    2 x MK 2H Omni Capsules    2 x CMC 1 Miniature Mic Amps    Lighter, Smaller Option to CMC 6 Amp    Mild High-Frequency Response Rise at 0°    High Immunity from RF Interference    Works with Colette Active Accessories    Supports 12 or 48 VDC Phantom Powering    XLR 3-Pin Output Connector    Windscreens, Stand Clamps & Premium Case

The matte gray Schoeps CMC 1 is a miniature Colette Series microphone amplifier offering uncompromising high fidelity in a lightweight and ultracompact form factor for studio recording, broadcast, and live stage applications. Presented as an alternative to the renowned Schoeps CMC 6 amplifier, the CMC 1 is compatible with all existing MK mic capsules and Colette active accessories (available separately). It features a balanced XLR 3-pin output, compliance with 12 or 48V phantom power, and low current consumption. Its Schoeps RFI Shield provides high immunity from RF interference for a clean, low-noise signal. The CMC 1 supports the high maximum SPLs tolerated by the various MK mic capsules (available separately). A stand adapter is supplied with the CMC 1.

• Complete, no-compromise alternative to the renowned CMC 6 amplifier
• Electrical characteristics of the CMC 1 are equal to, or even better than, those of the CMC 6 (flat frequency response, very-low distortion, and constant output impedance across the audio frequency range)
• Only 1.4" long (about a third the size of the CMC 6)
• Weighs just 1.3 ounces
• Fully compatible with all existing MK capsules and Colette active accessories such as the CUT 60 and RC tubes
• Compatible with all accessories of the CCM series
• Very-high immunity from RF interference with the Schoeps RFI Shield
• Optimized RF protection of the CMC 1 makes it ideal for use with transmitters such as the Audio Limited A 10
• Balanced, direct-coupled, Class-A output circuit
• Output is filtered in the ultrasonic range to prevent interference, e.g. from camera autofocus

The Schoeps MK 2H is part of the Colette series of modular capsules designed for use with the CMC mic amplifiers. If this microphone capsule is used indoors at medium recording distances (i.e. where direct sound energy is similar in amount to reflected sound energy), its overall response will be linear. Its extended frequency response and low noise make it appropriate for the most demanding applications.

The sound inlet of the MK 2H is narrower than that of our other pressure transducers, causing a slight, purely acoustic response elevation above 6 kHz. This reduces the high-frequency loss for diffuse sound, thus helping to preserve natural sound quality.

The MK 2H, like the MK 2S, is ideal for natural-sounding pickup of instruments and orchestras in spaces with well-balanced reverberance. The choice between the two capsule types is essentially a matter of personal preference. At a given miking distance, the MK 2H might be described as more "balanced and round" sounding while the MK 2S would give a slight additional brilliance. However, one might also choose the MK 2H for slightly closer placement or the MK 2S for slightly more distant placement, and then these two capsule types would have very similar sound quality, with the main difference being the balance of direct to reverberant sound which is picked up.

For spaced microphone (A/B) stereo recording and especially the Decca Tree method, KA 40 accessory spheres (available separately) are recommended.

This Schoeps stereo set comes with two CMC 1 microphone amps, two matched MK 2H capsules, a certificate of matching, two stand clamps, two foam windscreens, a hook-and-loop fastener cable strap, and a premium case.

Related Questions and Answers

Q: 1. will this work with the CMC 1 and cut 60?

A: Yes, this should work with the CMC1 and the Cut 60 capsule together.

Q: 2. Best wind shields for this? Both fluffy and wind shield?

A: The Sennheiser MZW-8000 Windscreen (BH #SEMZW8000) is the best choice of foam windscreen for the Sennheiser MKH 8040 Compact Cardioid Condenser Microphone. For higher wind scenarios, the Rycote Baseball Windscreen and Baseball Windjammer Combo Kit (0.7" Diameter Hole) (BH #RY039710) is a great solution.

Q: 3. The female to 2x male XLR cable seems short. Is it meant to be just an adapter? I would be connecting the mic to a MIxPre-3 II.

A: Just buy yourself 2 XLR cables 10 to 15 ft and just use this as an extender with the cables the Rode NT4 comes with.

Q: 4. Would this work with the sanken CS-M1?

A: Yes, it will.

Q: 5. Does Rode make any mics that have a built in interface?

A: Rode does offer several USB mics but they do not have a stereo X/Y style USB mic. You can use the NT4 with a dual-input USB interface such as the Focusrite Scarlett 2i2 (B&H # FOSCARL2I23G) to connect it to a computer. The included Y-cable for the mic has two 3-pin XLR connectors that will connect to each channel on the interface. Please contact us by phone or through live chat if you have additional questions or would like further assistance.

Q: 6. What's the best blimp/dead for this microphone?

A: The Rycote Mini Windjammer provides optimum wind diffusion for smaller microphones. Like the standard Windjammer, the Mini Windjammer provides 10 - 12dB extra protection over standard windscreens. This Windjammer accommodates the Rode NT4.

Q: 7. How far can a speaker be and the cmc641 would still pic up the voice

A: Beyond 5-6 feet, a speaking voice will start to sound distant from the Schoeps CMC641 Set Colette Series Supercardioid Microphone Set (Gray).

Q: 8. Is there a mount for this microphone on a HVX-255?

A: Due to the weight and diameter of the Rode NT4 it is difficult to shock mount this mic on a camera. You are able however to adapt the incuded stand mount the RM3 to your cameras shoe with a simple adapter. The Tether Tools hot shoe adapter features a 3/8 male thread that will support the stand mount using the 3/8 thread adapter that was included with the stand mount.

Q: 9. Is there a recommended field recorder for a high end mic like this? Is a Zoom F3 good enough?

A: The Zoom F3 would be an excellent choice for use with the Schoeps CMC641. It offers high-quality recording in 32-bit, which allows for great dynamic range with sensitive microphones.

Q: 10. Can this mic be plugged into a Panasonic GH-4 camera which I believe supplies minimal power to some mics?

A: The GH4 will provide plug in power to some mics. The NT4 will require phantom power which is more than the 1-5 volts your camera can provide. You can however use the mic using a 9 volt battery which will power the mic, and a Stereo XLR to Mini 1/8 inch Cable is included in the package which allows for connection to your camera.