The LUT7S PRO 7" Ultra Bright HDMI/3G-SDI Field Monitor from FeelWorld features a sharp 323 ppi display and supports SD, HD, UHD, and DCI 4K video. This HDMI monitor has an integrated L-series battery slot and comes with a dummy battery plate that allows you to mount and power optional accessories, such as wireless transmitters or receivers with an L-series battery slot. The LCD panel boasts a 1920 x 1200 resolution, 16:10 aspect ratio, 1200:1 contrast ratio, and a 2200 cd/m² measured brightness for easy viewing outdoors as well as indoors. The touchscreen allows you to quickly access your settings, and the IPS LCD provides good off-axis viewing, allowing you to see the image without being directly in front of the monitor and not experiencing distorted colors or contrast.

On the bottom edge of the monitor, you'll find HDMI and SDI input and output connections, with the headphone output residing on the edge. Along the bottom edge is a 1/4"-20 threaded mounting hole and power output port, while control buttons reside along the top edge of the monitor.

The LUT7S PRO supports custom 3D LUTs to accurately view the camera color on screen, uploaded via an integrated SD card slot on the side, and it supports professional Rec. 709 color calibration technology. A variety of image evaluating tools are built into the monitor including a histogram, false color, and zebras for checking exposure, peaking and magnification for checking focus, and markers for ensuring correct framing.

7" 1920 x 1200 IPS LCD Monitor    HDMI and SDI Input/Output    2200 cd/m² Brightness, Touchscreen    Power Accessory via Battery. Plate    DCI 4K, HD, and SD Video Input    L-Series NP-F970 Battery Plate    1200:1 Contrast Ratio, 3D LUT Support    160° Viewing Angle

• High-resolution 1920 x 1200
• High contrast of 1200:1
• Ultrabright 2200 cd/m²
• 160° wide-view-angle IPS Panel
• Histogram
• Peaking focus assist (red, green, or blue highlight over focused image)
• False color
• Zebra exposure
• Nine-grid
• Embedded audio
• Scan mode (underscan, overscan)
• Zoom (4x, 9x, 16x)
• Anamorphic mode (1.3x, 2x, 2x mag)
• Pixel-to-pixel
• Center marker
• Safe area (80, 85, 90, 93, 96%, 2.35:1)
• Ratio marker (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1)
• Marker color (red, green, blue, white, black)
• Check field (red, green, blue, mono)
• Image flip (H, V, H/V)
• Image freeze
• Color temperature adjustment

The L-series mounting plate allows you to directly attach and power accessories, such as a wireless transmitter or receiver, to the back of the monitor using the accessories L-series battery slot.

The single rear battery slot is compatible with Sony L-series batteries.

FeelWorld uses the professional Rec. 709 HD color standard and is calibrated at the factory. It can achieve monitor calibration efficiently and get accurate color reproductions easily, showing the image when you shoot without distorting the color.

The menu controls are intuitive and easy to use via the touchscreen. Two different feature buttons are programmable to the various features you use the most.

The compact design includes 4K HDMI and 3G-SDI input/output, so you can connect them to 4K cameras and DSLRs. The HDMI connection is compatible with up to 4K24.

Load custom 3D LUTs using the integrated SD card slot.

Histogram is a quantitative tool to check the picture brightness.

The audio level meters provide numerical indicators and headroom levels.

The peaking filter displays a colored highlight on the screen where sharp edges appear.

Built-in selection of no-squeeze, 1.3x, or 2x allows you to use anamorphic lenses or adapters and see the image unsqueezed, even if your camera does not de-squeeze in-camera.

Related Questions and Answers

Q: 1. Does this show the battery life remaining?

A: Yes it does.

Q: 2. What size are the DC barrel connectors?

A: The FeelWorld LUT7 PRO 7" Ultrabright HDMI Field Monitor with F970 Accessory Mounting Plate uses a 3.5mm barrel port for continuous power.

Q: 3. does this support 2336x1344 of the zcam?

A: This monitor does not support that specific resolution, you will be hard pressed to find one that will. However you should still be able to shoot in such a resolution with the Z Cam and output a 1080p signal for this monitor to see.

Q: 4. Does this model support 4k @ 60fps input?

A: No, when using 4k modes with the FeelWorld LUT7 PRO 7" Ultrabright HDMI Field Monitor the highest framerates supported will be 30p. Normally you would adjust your camera's HDMI output to 30p when recording in high framerate modes. HDMI DCI 4K: 24 UHD 4K: 30/29.97/25/24/23.98 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080PsF: 24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50/30/29.97/25/24/23.98 576p: 25 480p: 29.97 576i: 50 480i: 59.94

Q: 5. What does loop-through mean?

A: Loop-through means you can output the video signal from the monitor to another device.

Q: 6. Most high brightness monitors draw a lot of power. Any idea how long a NP-F770 would last compared to the 5" version of this monitor?

A: A battery like the Watson NP-F770 is rated for around 32.5 Watt Hours. This monitor has an 18 Watt Draw. You should expect to get a bit less than 2 hours of operation with an NP-F770. https://bhpho.to/2n2NUHc

Q: 7. What's the main difference(s) between this and the FeelWorld LUT7 7" 3D LUT 4K HDMI Monitor? (https://www.bhphotovideo.com/c/product/1531472-REG/feelworld_lut7_7_touch_screen.html)

A: They are essentially the same monitor but the Pro version makes mounting and powering accessories easier. The standard vision has 2 battery slots for powering the monitor for extended periods of time. the Pro Version swaps out one of the battery slots for a dummy battery. This allows you to mount and power accessories that use NP-F Style batteries at the same time. An example of this is a wireless transmitter. On the LUT 7 Monitor you would need to purchase an articulating arm to mount the transmitter and an additional battery to power it. On the LUT 7 Pro you could mount the transmitter on the NP-F dummy battery built into the monitor solving both the mounting and powering at the same time.

Q: 8. If I am recording with a BMPCC in 5k or 6k format, can I watch on this monitor via hdmi?

A: You can watch on this monitor via HDMI because the highest that the BMPCC 6K will output via HDMI is 1080p60.

Q: 9. Is there a d tap connector that would work with this?

A: You could use a D-tap to Sony L-series dummy battery cable.

Q: 10. Greetings! I just purchased and received the FeelWorld LUT7S PRO 7" Ultra Bright HDMI/3G-SDI Field Monitor with F970 Plate. I'm not getting any audio out of the 3.5mm jack. I did the full range of troubleshooting. I used the SDI and HDMI outputs from the camera, and the picture is great, the audio meter is showing the proper modulated signal, but no sound from the headphones. Yes, the headphones are good. I went into the menu on this monitor and enabled the Embedded Audio. Hmmm, what's up?

A: That is hard to say within this forum. Please call us at 1-800-606-6969 ext 7207 and one of our sales experts can help you troubleshoot your product.