Help to ensure the optimal operation and efficiency of your Adder RMK12 Rackmount Kit installation with this Blanking Plate. A blanking plate is recommended if you're installing a single module into an RMK12 rackmount to provide the proper cooling airflow to your system. The outer edge of the blanking plate needs to overlap with the ears of the rack, which means that you will need to install the blanking plate before the tray, or remove the bolts on the blanked side—keeping your tray supported as you put the blanking plate in place.

Fits Adder RMK12 Rackmount Kit    Ideal for Single Module Installations    Provides Efficient Airflow

Related Questions and Answers

Q: 1. this bracket come with 6 or 8 screw ?

A: The RM1642VLZ rack mount brackets do not ship with screws. The screws used are taken from the mixer side panels itself.

Q: 2. Will this mount one Sennheiser EW100G3 Receiver in a rack with the receiver's antennas mounted on the front of the rack next to the receiver?

A: Yes the Sennheiser GA 3 Rackmount Kit for EW G3 and G4 Series Wireless Receivers will hold one or two receivers.

Q: 3. Does this work on the XS Wireless True Diversity Receivers?

A: Yes, the Sennheiser GA 1-XSW 2 19" Rackmount Kit can be used with one or two Sennheiser EM-XSW 2 True Diversity Receivers with External Antennas, such as B&H # SEEMXSW2A. This is the same receiver that is included with many of the XS Series wireless systems such as the Sennheiser XSW2-ME2 Wireless Lavalier Microphone System - A: 548 to 572 MHz (B&H # SEXSW2ME2A), the Sennheiser XSW 2-835-A Wireless Handheld Microphone System with e835 Capsule - A: 548 to 572 MHz (B&H # SEXSW2835A), and the Sennheiser XSW2-CI1 Wireless 2 Instrument System - A: 548 to 572 MHz (B&H # SEXSW2CI1A),

Q: 4. Does this allow you to rack mount the Sennheiser XSW 1 DUAL (SEEMXSW1DUHL )?

A: No, there is not a rackmount kit for the XSW-1. You would want to use a rack shelf: https://www.bhphotovideo.com/c/product/1261093-REG/auray_rs_v_1u_one_space_vented_rack.html

Q: 5. What BNC cable extensions kit is needed to front mount the antennas of a Sennheiser EW100G3 Receiver with this?

A: You will need the Sennheiser AM 2 Antenna Front-Mount Kit for EW and EW-D Receivers (B&H # SEAM2) to mount the antennas for the Sennheiser EM 100 G3 wireless receiver from the EW 100 G3 wireless microphone system in the front of the rack.

Q: 6. Does this fit with the Matthews Monitor Mount attached to the SmallHD Monitor?

A: On the 1300, 1700, and 2400 Series SmallHD Monitors, there is room for this to be mounted on the top rear center. Then a VESA plate, like the Matthews Monitor Mount for Baby (5/8 ) Spigot B&H # MAMMLS or the SmallHD C-Stand Mount for 1300 Series Monitors B&H # SMAMTSMCSTD can be mounted on the bottom rear center.

Q: 7. How many RU space does this take?

A: thank you for your question. This will take up 12 rack spaces with the mixer installed.

Q: 8. Will this fit a Marantz SR-7001 receiver???

A: According to Marantz this kit is compatible only for SR7008, SR7007, AV8801 and AV7701.---------------------------------------------------------------------------------------------http://bit.ly/1TNXbv4

Q: 9. Is this the same kit that comes with a ew100 g4 wireless system?

A: Yes, it is the same rackmount kit.

Q: 10. Can the Sennheiser GA 3 accomodate two receivers _AND_ mount both antennas from both receivers on the front?

A: Yes, the Sennheiser GA 3 Rackmount Kit for EW G3 and G4 Series Wireless Receivers can hold one or two receivers with antennas attached to the receivers.