The Cable Techniques LPX-SR-12B is a thin and lightweight cable perfect for interconnecting field gear like Lectrosonics, Sound Devices, Zaxcom, Zoom, and many others. Built for the rigors of indoor/outdoor location work, it features black shells, gold pins, and an extremely flexible, crush-resistant, tear-resistant, and cold-resistant PUR Polyurethane jacket that's only 3.2mm in diameter.

The 12" cable is terminated with a straight XLR-3 female connector (with a blue ring) at one end and a low-profile, right-angle XLR-3 male connector (with a blue cap) at the other.

Low-profile connectors considerably reduce the weight of your rig and allow for beautifully organized setups. They can be disassembled and repaired on the fly. You can adjust the low-profile XLR cable outlet orientation to either 3 or 9 o'clock. The cable is assembled in the USA.

Use with Field Gear    Straight XLR-3 Female    Low-Profile, Right-Angle XLR-3 Male    Thin 3.2mm Outer Diameter    Ultraflexible PUR Polyurethane Jacket    Blue Cap/Ring    Assembled in the USA

Related Questions and Answers

Q: 1. Will this allow me to connect my Ipad Nano 7th gen with a TRRS jack to a regular 3.5mm stereo TRS cable?

A: I just ordered this ... I found that just any TRS male will not work with my new Note 8 which is TRRS female. Apparently, the internal brush contacts are misaligned just enough so that it isn't 100% compatible with TRS male (in my case it was from older Bose headphones).

Q: 2. Can I use this cable to connect my eos R to my ipad air M1?

A: Yes, the Kondor Blue Right-Angle USB 3.1 Gen 2 Type-C Cable (12") should work attaching the Canon EOS R to an Apple 10.9" iPad Air with M1 Chip.

Q: 3. Can i use this with XF605?

A: No, the Kondor Blue Straight D-Tap to DC 2.5mm Right-Angle Cable (Kondor Blue,15") would not be compatible with the Canon XF605 UHD 4K HDR Pro Camcorder. A suitable way to power the camera via D-Tap would be the GyroVu D-Tap to Canon BP-A30 Dummy Battery Cable (30"), BH #GYGVDTAPA30.

Q: 4. Does it also work with bmpcc 6k or only the 6k pro?

A: The Kondor Blue Mini-XLR to XLR Female Cable for BMPCC 6K Pro & Canon C70 would also work with the Black Magic Pocket 6K G2, Pocket 4k, and Pocket 6K.

Q: 5. Will this power an atomos ninja 7?

A: No this will not work with the Atomos Ninja Inferno 7. The right cable will be this: BH #INDTATM1

Q: 6. hello I would like to know if this product can power a Blackmagic Design Video Assist 3G-SDI/HDMI 5" Recorder/Monitor..? Thank you

A: The Blackmagic Video Assist is not listed under comparable devices, however it does have the same size barrel connector. So you are able to plug it in and use it with a d-tap power source.

Q: 7. Will this power a Canon R5c from a gold mount battery?

A: No, This Kondor Blue Straight D-Tap to DC 2.5mm Right-Angle Cable (15") will not support powering the R5C.

Q: 8. Is this compatible with the ninja V?

A: The Kondor Blue Straight D-Tap to DC 2.5mm Right-Angle Cable (15") BH #KOBDCTPRA15S is compatible with the Atomos Ninja V 5" 4K HDMI Recording Monitor BH #ATNINJAV. But this is not a locking DC cable. Best to use the: Atomos D-Tap to DC Barrel Coiled Cable - B&H # ATOMDTPCB2

Q: 9. Can this cable be used to power the canon xf405 straight from vmount battery? (IndiPRO Micro-Series 98Wh)?

A: The Kondor Blue Straight D-Tap to DC 2.5mm Right-Angle Cable (15") is meant for the Canon C70. That camera has a voltage input range of (11.5 to 20 VDC). The XF405 is listed by Canon as having a power range of. 7.4V DC (Battery Pack) to 8.4V DC (DC IN) Since this cable is unregulated, using it with 14.4 volt battery on a camera that takes only 8.4VDC, you would have an overvoltage situation, something you do not want to have.

Q: 10. I just purchased an SC4 3.5mm TRS to TRRS adaptor hoping to connect my Apogee Element 88 to my iPhone 11. My signal chain looks like this - MacBook Pro - Apogee 88 - TRS RCA Cable - SC4 3.5mm TRS to TRRS adaptor - to Lightning to 3.5 mm Headphone Jack Adapter. The iPhone is not recognizing the mic. Is it possible to use SC4 3.5mm TRS to TRRS adaptor with and RCA cable line out?

A: Upon looking at the Element 88, we notice there are no RCA outputs on the unit. You may be referring to the 1/4'' outputs on the back of the unit. If this is correct, and the cabling is as you suggested with 1/4'' outputs from the ALT out, then technically signal should pass. You may need to look at your DAW outputs and ensure you are sending signal to the ALT outputs and not just the mains. An alternative to that many adapters would be this cable, used from the 1/4'' outputs, and connected right the the Apple lightning to headphone adapter BH #SEIPSUMTS3.