The ECPB DMXOUT Single-Gang DMX Out Plug-In Station Wall Plate from ETC is designed for the DMX systems. It can be mounted on a back box. The ECPB (Electronic Control Plug-in Box) allows lighting controls to connect and operate lighting and other equipment.

Fits in most standard back boxes depending on variation

Data options include DMX512 Input or Output, Remote Focus Unit (RFU), Ethernet Network, Portable Unison station, Serial or computer interface, and AC power option (voltage barrier required)

Can be used in theaters and auditoriums, television studios, houses of worship, museums, casinos, and hospitality

Finished in fine texture, scratch-resistant black powder coat

White silk-screened graphics

U-Bolt Kit for pipe mounting (sold separately)

Terminal block supplied for contractor terminations

Barriers provided when line-voltage and Class 2 controls are ganged together in the same wallbox

Mounts in an industry-standard flush mount back box (sold separately)

Related Questions and Answers

Q: 1. I this compatible with LED loads? (No flicker?)

A: Yes

Q: 2. Will this work with amaran f22c?

A: Yes, the Aputure USB-C to DMX Adapter will work with the Amaran F22c 2 x 2' RGB LED Flexible Light Mat, due to each being 5-Pin.

Q: 3. Is there a knockout on the bottom or just the back?

A: There is a knockout on the botom as well as the back of this gang box.

Q: 4. Will this work with the amaran 1' 2' and 4' tubes?

A: Yes, the amaran PT4c RGB LED Pixel Tube Light (4'), the amaran PT2c RGB LED Pixel Tube Light (2'), and the amaran PT1c RGB LED Pixel Tube Light (1') have USB-C ports and can be controlled through DMX with the following cable: the Aputure USB-C to DMX Adapter (Single).

Q: 5. Does the female usb-c part of the cable provide power to run a SkyNode?

A: No, the Aputure USB-C to DMX Adapter's (Single) female USB-C port does not output power.

Q: 6. Is this able to charge and control the Aputure MC pro at the same time? If so, how does that work? Is there a second USBC input?

A: The Aputure Active USB-C to 5-Pin DMX In & Out Adapter for MT Pro, MC Pro & INFINIBARs outputs power via USB-C due to the power that comes from DMX cable when connected to a source. If you are using DMX to control your Aputure MC there is only a USB-C input, so in order to control you can use Aputure Active USB-C to 5-Pin DMX In & Out Adapter that will convert the signal and the power from DMX source into Aputure MC. All DMX cables use 1 pin for power ( Ground/Common) and the other 4 for transferring DATA in and out.

Q: 7. Would this bracket work with a 400x600 vesa pattern? Samsung VM bezelless line has a 400x600 vesa.

A: The Mount-It! 2 x 2 Video Wall Mount with Push-In Pop-Out Brackets BH #MOMI20426 has a VESA Compatibility of 100 x 100 mm to 400 to 400 mm.

Q: 8. Will this mount fit four 65" displays as is or are there adapters for the rails that need to be purchased?

A: The Mount-It! 2 x 2 Video Wall Mount with Push-In Pop-Out Brackets (BH # MOMI20426) will work with four (4) 50/55" displays, 66lbs. total weight maximum, out of the box. Best to use four (4 of these mounts: Mount-It! Push-In/Pop-Out Video Wall Mount with X-, Y-, Z- Axis Micro-Adjustability (B&H # MOMI20413): https://bhpho.to/42Tg2ka Key Features: For 40" and Larger Displays Supports Monitor Weighing up to 154 lb

Q: 9. The photos of this product show two different versions. Does this have a 5-pin or a 3-pin DMX connection?

A: The Elation Professional UNI BAR Single DMX Channel Pack ships with a 5-pin DMX in and out connection.

Q: 10. Does the Azden 35xt provide 48v phantom power like the 30xt did?

A: The Azden 35XT Plug-In transmitter is not able to provide phantom power. It is designed to work with dynamic handheld mics.