The column of the non-motorized RSD Copy Stand from Kaiser is constructed from matt black, anodized aluminum with multi-section tubing and features inch/cm scales. The camera carrier is also constructed from aluminum. This camera carrier can be horizontally adjusted up to approximately 6.3” (16cm) with rack-and-pinion parallel guides.

The RSD Copy Stand offers both left and right hand operations using 2 blocking screws that prevent inadvertent changes to the adjusted position. The camera mounting plate can be tilted by an angle of ±90° and the camera connecting screw is horizontally adjustable. The height adjustment of the camera plate is available with a hand crank.

The copy stand also features a large, non-reflecting matt gray base plate with printed grid and inch/cm scales. Additional features of the stand include height adjustments of the base feet and a spirit level for indicating the proper alignment of an attached camera.

Hand-cranked, rack-and-pinion height adjustment

Counter-balanced by a built-in coil spring

Blocking screw to stop accidental height changes

Related Questions and Answers

Q: 1. Joseph's answer to my 1/4/21 question was not helpful. I don't see how it is possible to mount a ball head on the Kaiser 20531copy stand. Can you please try again and explain how this can be done?

A: ******Duplicate *******Delete*********

Q: 2. Can the camera be mounted in two different ways ... meaning 1.) with the VIEWFINDER towards the column and 2.) the other way, with the TRIPOD HOLE (of the camera) towards the column?

A: No.

Q: 3. is it easy to break down for traveling?what does it weigh?what is an appropriate smartphone clamp?

A: Unfortunately, the manufacturer does not list a weight for this item, but our records indicated that the shipping weight is 8.2 lbs. A smartphone clamp you can use with the camera mount is the Joby GripTight PRO Smartphone Mount B&H # JOJB01389.

Q: 4. My Jan 2 question was not answered satisfactorily. I want to know if the camera can be adjusted when mounted on the post such that the sensor is parallel to lens board and negative. A level mounted to camera doesn't help if camera cannot be adjusted. Can camera position be adjusted?

A: You can use a Ball Head to adjust the camera angles like Oben BA-117 Single Lever Ball Head B&H # OBBA117 + a Bushing BH #OB1039

Q: 5. Will this be capable using it with darkroom enlarger, enlarging 120 & 35mm films? On 8x10 paper? And what about enlarging 4x5 films?

A: Regarding the Kaiser Repro Kid Copy Stand Kit (Consists of 23.25" Calibrated Column, 15 x 12.5" Baseboard (B&H# KACSKKQ), I would say no. Enlargers typically have larger and more robust columns to ensure greater stability. I would not recommend using any copy stand for an enlarger with any size paper or film. First, it likely will not fit. Second, copy stands are typically used with cameras that can utilize a faster shutter speed than one you would use when producing an enlargement. That is why the columns of a copy stand can be less robust. I'd recommend sticking with enlarger-related equipment when using an enlarger.

Q: 6. What is the usable scan area with the upright and RB 5070 DX2 lighting unit attached? I.e., is it slightly less than 20x24"?

A: The RB5070 DX2 Lighting Units would attach to the corners of the baseboard on this copy stand. That being said, the baseboard would give you a usable surface area closer to 20 x 24".

Q: 7. will this unit be compatible to use the Kaiser Camera Stand Light Protector (BH #KAELPR1)?

A: Yes, the Kaiser Camera Stand Light Protector, BH #KAELPR1 is compatible with this copy stand.

Q: 8. Does the mounting arm allow for pitch and yaw adjustments (in other words tilt side to side and tilt forward and backward)?

A: Unfortunately, the mounting arm of Kaiser RS1 lacks pitch and yaw adjustments.

Q: 9. I've looked at various reviews of the Kaiser Repro Kid Copy Stand Kit as an alternative to this item and a common concern across reviews is the screw that holds the camera in place is not strong enough to keep the camera in the desired position. Is the camera mount head on this item more robust/robust enough?

A: Yes the camera mount would be robust enough for a camera within the 7 lb range.

Q: 10. Will this fit in the Kaiser 205615 table? https://www.bhphotovideo.com/c/product/248571-REG/Kaiser_205615_Table_Frame_for_the.ht

A: No, the Kaiser Calibrated Counterbalanced Column for Copy Stands (59.1") does not fit onto the Kaiser Table Frame BH #KAFSMRSP • MFR #205615.