Offering a 1/4"-20 mounting thread, the Sony NP-FW50 Dummy Battery to L-Series Battery Plate from DigitalFoto is designed to be mounted onto a cheese plate or other support on your camera rig to provide extended battery power. The included dummy battery allows you to use larger-capacity L-series type batteries to power any camera or device that runs on a Sony NP-FW50 battery. The dummy battery adapter provides a 7.4 to 8.4 VDC input and output, and it features a coiled 15.7 to 39.3" dummy battery cable.

L-Series Battery Plate    NP-FW50 Dummy Battery    1/4"-20 Mounting Thread & Screw    Coiled 15.7 to 39.3" Dummy Battery Cable    7.4 to 8.4 VDC Input & Output

Related Questions and Answers

Q: 1. When it says "Fully Decoded Dummy Battery" does this mean it most likely won't give errors? Also, would this be safe to use (correctly) with an FX3?

A: We would not recommend using this with the Sony FX3, as it is not among the tested and approved units by Sony.

Q: 2. Does this product work with the Atomos Shinobi?

A: DigitalFoto Solution Limited D-Tap to Sony L-Series Dummy Battery (12.6 to 39") will work with the Atomos Shinobi.

Q: 3. Does this step up the voltage of the battery from 7.4V to 12V or higher? The input for the BMPCC should be minimum 12v right?

A: Yes, the DigitalFoto Solution Limited L-Series/NP-F970 Battery Adapter can step up the voltage to 12V through the 2-pin cable. The 2-pin port accepts a minimum of 12V. The LP-E6 battery slot accepts a minimum of 7.2V.

Q: 4. Is the compatible with the Panasonic S5?

A: No, the DigitalFoto Solution Limited Sony NP-FW50 Dummy Battery to L-Series Battery Plate (Straight Cable, 35.4") uses the Sony NP-FW50 battery type for the dummy battery shell, which is not compatible with the Panasonic Lumix S5 Mirrorless Camera (BH #PADCS5). Instead you will need to use a DMW-BLK22 dummy battery. You can find compatible DMW-BLK22 dummy batteries via the link below. See: https://bhpho.to/44yMDgk

Q: 5. Could this plate both power the BMPCC 6K pro and the Tilta Nucleus Nano at the sometime with the 2nd port?

A: This could power both if you also get a power cable that will go from this plate to the Nano motor. However, the Nano motor needs 14.8V to run at the full torque, whereas this plate only outputs 7.4V from the second port. We would not recommend trying to power both off the L-series battery as that will use a lot of power and cause the battery to die fairly quickly. Using a V-mount battery to power both will be a much better option.

Q: 6. Will this work with the Atoms Ninja V?

A: The DigitalFoto Solution Limited D-Tap to Sony L-Series Dummy Battery (12.6 to 39-) has appropriate type of dummy battery connector for the Atomos Ninja V for its L-series battery port.

Q: 7. It shows the "regulated output" voltage, what is the allowable input? I'm assuming it's 14.8, but I'd like to know for sure.

A: The input should be 12V when using the DigitalFoto Solution Limited Sony NP-FZ100 Fully Decoded Dummy Battery.

Q: 8. any way it will work with nikon d500 ?

A: Yes, the DigitalFoto Solution Limited Nikon EN-EL15 Dummy Battery + USB Type-C Coiled Power Cable will work with the Nikon D500 camera.

Q: 9. How long is this coiled and uncoiled?

A: The length of the DigitalFoto Solution Limited DC5.5 x 2.5 to BMPCC 4K/6K Power Cable (Coiled Cable) coiled and uncoiled would be as follows. Coiled 39cm Uncoiled 1m

Q: 10. I already have this that I purchased years ago. I wonder if I attach dc input adapter (from ninja v) on to this. Does this convert any voltage power to 7.2v for sony a series camera?

A: The IndiPRO Tools Sony L-Series Battery Adapter Plate to Sony NP-FW50 Dummy Battery is designed only for use as a power source for cameras that use the NP-FW50 battery. Any other use would be at your own risk.