Install your audio equipment up to 130' from your source with the SVS SoundPath Tri-Band Wireless Audio Adapter. It allows you to transmit audio signals from the RCA output of your source device to a subwoofer, amplifier, or powered speaker system up to 130' away, within line of sight. It outputs in 16-bit/48 kHz audio to help minimize loss of quality. It includes two mono RCA cables for virtually instant installation.

Up to 130' Range    2.4, 5.2 & 5.8 GHz Wireless Bands    16-Bit/48 kHz Audio    Stereo RCA Input and Output    6 Hz to 20 kHz Frequency Response    LFE Support    <19 ms Latency    Includes Two Mono RCA Cables

The Tri-Band Wireless Audio Adapter auto-switches between the 2.4, 5.2, and 5.8 GHz wireless bands to select the most stable channel for uninterrupted audio playback. It's highly resistant to interference from Wi-Fi based security cameras, routers, smart TVs, and other wireless devices.

This wireless system passes pristine 16-bit/48 kHz audio signal up to 130' with no noticeable delay.

The system streamlines home theater system setup by removing the need for long or complicated audio cables running along floors or walls.

Left/right stereo signal transfer unlocks wireless connectivity for one or more subwoofers, a 2-channel zone of powered speakers, amplifiers, powered surround speakers, and more.

This system transmits the complete audible frequency spectrum (6 Hz to 20 kHz, ±0.5 dB), providing a full-range wireless audio solution for subwoofers, powered speakers, and more. It's great for adding additional zones to create single source, multi-zone audio system.

The system adds wireless connectivity, giving you more flexibility when placing subwoofers, powered speakers, and other audio components in a room, all without sacrificing performance.

• Connect the transmitter to your A/V receiver, TV, or other audio source via RCA

• Connect the receiver to a subwoofer, powered speaker, power amplifier, or other line level devices

• Make sure both the transmitter and receiver are receiving power (through included wall adapter or USB source)

• Wait a few seconds for the adapters to sync and you're ready

• Up to three receivers can be paired to one transmitter to create a multi-room distributed audio system or for use with multiple powered subwoofers or speakers

• When multiple wireless devices (microwaves, cordless phones, Bluetooth devices, etc.) are all operating in close proximity

• When you've experienced interference in the past from routers, smart appliances, and more

• When connecting it to another wireless device like SVS Prime Wireless Powered Speakers, which have Wi-Fi and Bluetooth streaming capabilities

• When the subwoofer or powered speakers are further than 60' (line-of-sight) away from the transmitter

• Deters against both in- and out-of-band sources of interference, including: microwaves, wireless cameras, cordless phones, Bluetooth devices and more

• Operates seamlessly alongside 802.11b/g/n Wi-Fi

• Automatic receiver antenna diversity minimizes fading and multi-path effects

• Seamless RF band/channel switching

Related Questions and Answers

Q: 1. Will this work to extend wi-fi to an external garage if it's within range? I already have the router.

A: If you have another Synology Wireless Tri-Band Mesh Router, you can purchase another and use it as an extender to your existing router.

Q: 2. what range of load ( weight of sub woofer) are a set of 4 rated for?

A: The SoundPath Subwoofer Isolation System feet have an optimal weight range of 5-30 pounds per foot.

Q: 3. Can I implement policy routing with this router, that is send device 1 always to WAN1 and device2 always to WAN2?

A: The Synology RT6600 AX6600 Wireless Tri-Band 2.5G / Gigabit Router BH #SYRT6600AX has one uplink WAN port.

Q: 4. Can these be powered with PoE?

A: No, the Synology Wireless Tri-Band Mesh Router BH #SYMR2200AC does not take PoE power.

Q: 5. Will it work with wrx560 as the main router?

A: The Synology Wireless Tri-Band Mesh Router is designed to be used with the Synology RT2600AC AC-2600 Wireless Dual-Band Gigabit Router, B&H # SYRT2600AC.

Q: 6. Will this work as a range extender, over the existing wifi. Not connected via ethernet. My service is with Century Link.?

A: Yes, you can use the Synology Wireless Tri-Band Mesh Router to extend your existing network, but you have to make sure that your primary router is either RT2600ac or MR2200ac.

Q: 7. Can I configure a second WiFi vlan (not guest) for a second group of users/devices?

A: Yes, you can use the separate wireless bands for different user groups on the Netgear RAXE500 Nighthawk AXE11000 Wireless Tri-Band Gigabit Router.

Q: 8. What if the amplifier does not have an RCA output -only speaker level out?

A: An amplifier that only has speaker outputs would not be compatible with this wireless system.

Q: 9. Will this work with my exsisting modem from my provider?

A: yes. This can be used as a wifi access point using your current modem - or replace the modem (if you have ethernet as the output). You can't use this in place of a cable tv modem that uses a coax feed like xfinity - but you can place this after your modem and use it for wifi. It will also work by itself - OR - with multiple units to create a mesh network. You can also use it with the Synology ac2600 router to create a mesh system. I have the 2600ac router as my main router/wifi device after a Verizon FIOS ONT - and an additional mr2200 at the other end of my loft to create a whole house wifi system.

Q: 10. Will this replace my current router and extenders?

A: This could be a replacement for your current router and extender. It's also likely you will experience faster speeds and a more stable network.