Obtain clear image quality with the DisplayPort 1.2a Cable from Comprehensive. Aluminum foil shielding offers 100% coverage with 25% overlapping and 65% braided tin copper shielding wrapped in a protective PVC jacket to enhance signal strength and quality. Male end nickel-plated heads have integrated security latches that fix the cable into the DisplayPort inputs, ensuring a strong connection between your devices. With High Bit Rate 2 (HBR2), you can obtain up to 21.6 Gb/s data rate bandwidth, granting resolutions up to 4096 x 2160, refresh rates up to 60 Hz, and 24-bit color depth, allowing you to experience clear and vivid images suitable for your shows, games, and digital artwork.

15' Cable Length    4096 x 2160 Maximum Resolution Support    60 Hz Refresh Rate Support    HDCP 2.2 & 1.4 Compliant    Up to 21.6 Gb/s Data Rate    24-Bit Color Depth    Nickel-Plated Finish    Security Latches    PVC Jacket    Aluminum Foil & Tin Copper Shield

This cable supports Multi-Stream Transport (MST), enabling you to daisy-chain multiple monitors for a simplified and efficient screen setup. DisplayPort Content Protection (DPCP) and High-Bandwidth Digital Content Protection (HDCP) allow you to transmit protected and secured content to your display.

DisplayPort 1.2a cables are backward compatible with DisplayPort 1.2 and 1.1 versions, allowing you to take advantage of this cable's versatility.

Related Questions and Answers

Q: 1. Would this work with the Oculus Quest 2?

A: Most likely no. Oculus Link is a blazing fast fiber-optic cable providing an ideal 5M (16ft) of play range and is not the same thing as this (or any) USB-C cable..

Q: 2. I have old 819 floor mic that has very low sensitivity. Desire to use the new preamp but need this cable to connect it to the floor mic 3 pins. Is the new preamp compatible with the old mic? Looking forward to a boost in gain and may be a lower noise? Please advise do expect a wiring change may be needed.

A: I believe it is, same pin type and there wouldn't be any need to wire differently. To be sure I would contact Shure (no pun).

Q: 3. Will this cable work with Canon R3 and R5 cameras?

A: The ProAm USA ProCinema Micro-HDMI to HDMI Cable (15') will work with the Canon R3 and R5 cameras.

Q: 4. What is the difference between the black 10' and orange 10' that is more expensive? I want the tether to connect my EOS R with my Mac. Will the blank one work ok?

A: There is no physical difference between the two options. We are able to offer the black cable for cheaper.

Q: 5. Is this compatible with Apple TV? Will it extract a L/R audio signal from an Apple TV G4 regardless of the audio output setting on the ATV4? What constraints/limitations apply to using the device in this manner?

A: This should work fine with an Apple TV.

Q: 6. Will this accept video output from a video camera (C200 specifically)?

A: The Comprehensive 4K HDMI Audio Extractor is designed to take a 4K signal from devices that can produce that signal, though it has not been tested with cameras. Technically, the Canon EOS C200 Cinema Camera (EF-Mount), B&H # CAC200EF, should be supported but has not been tested.

Q: 7. What is CEC bypass? I'm looking for a device that will not pass through CEC commands but will allow ARC audio via HDMI. How is CEC bypass enabled on this device?

A: CEC stands for Consumer Electronics Control. This is a control function that lets one A/V component control another if they are connected via HDMI cables.

Q: 8. Will it extract 2 channel pcm from a multichannel hdmi signal for feeding to a stereo receiver while sending the other channels to a separate preamp?

A: Yes, we believe this is possible.

Q: 9. Does this support Dolby Vision?

A: We're afraid not. This product does not support Dolby Vision.

Q: 10. Compatible with a9 ii?

A: Yes, it will be compatible with the a9 II