Best Mic Stands For Condenser Microphones

Micw Pp390 Mic Clip For M-series Measurement Microphones

Product Code: ga95198
Availability: In Stock

$54.00 $73.98

Qty

9 reviews Write a review

Description
Reviews (9)

Audio Engineers and system installers looking for a quality microphone holder for their M-Series microphones will be pleased with the Wmic PP390. This mic clip is meant for the M416 or M215 microphones as well as mics of a similar size and shape. A 5/8-27 threaded insert is included for compatibility with most microphone stands.

For M416 & M215 Measurement Microphones Fits Similarly Sized Microphones Holds Microphone Securely Includes 5/8-27 Brass Insert

Parameters
Compatible Microphone Diameter	0.25" / 6.35 mm
Mounting Thread Size	5/8"-27 Female (3/8"-16 Female with Included Adapter)
Material of Construction	ABS Plastic

Related Questions and Answers

Q: 1. Any meaningful differences of the Diety S-Mic 2 and the Rode NTG-1 shotguns for crowd miking?

A: The S-Mic 2 may be a better choice because it has a slightly wider pickup range which is better to capture audio from multiple people than a mic with a very narrow pickup range, which is better for picking up one person. The S-Mic 2 is easy to use because it has no onboard switches or controls to adjust and it is also moisture resistant. Its frequency response range is 50 Hz to 20 kHz, it handles loud sounds up to 130 dB SPL, and has very low noise. The NTG1 has a frequency response range or 20 Hz to 20 kHz and handles loud sounds up to 138 dB SPL, and also has low noise. It also has an onboard low-cut filter which is useful to reduce low rumbling background noise. Both the S-Mic 2 and NTG1 are very good mics, but for miking a crowd, the S-Mic 2 may be the better option since it has a wider pickup range and not as focused as the NTG1. The noise level rating for the S-Mic 2 is slightly lower than the NTG1 (12 dBA vs 18 dBA). The moisture resistance is also a good feature for outdoor use.

Q: 2. I lost my foam windscreen for this mic, any recommendation for replacements?

A: Please review the following item. Auray WSF-2029 Foam Windscreen for Shotgun Microphones - (29cm) BH #AUWSF2029 • MFR #WSF-2029 https://bhpho.to/3GGDIgJ

Q: 3. What kind of phantom amp would be recommended for this microphone?

A: The Earthworks M50 requires +48 volts phantom power in order to operate. There are several portable battery powered, as well as AC powered units available. The ART Phantom I is a solid single channel solution. a href= http://bhpho.to/1Amcmmn target= _blank http://bhpho.to/1Amcmmn/a

Q: 4. What d-tap cable do I need to power my bmpcc with the Gripper?

A: You can use this one. IndiPRO Tools 12V D-Tap to Blackmagic Pocket Cinema Camera Power Converter (30 ) B&H # INPCN12VBMP

Q: 5. Hi B&H:)Can You sell Gripper Kit?Such as Hawk-Woods GR-100K (GR100K) Gripper - 14.8V 100W Clip-on Battery System with Charger.

A: In order to see if we can order this for you, please email us. provideo@a href= http://bhphoto.com. target= _blank bhphoto.com./a You can use this link to the manufacturer's website. http://bit.ly/29v6IvS

Q: 6. Hi, what is the range of microphone diameters that the Auray MC-22SN can accommodate?

A: The manufacturer has not provided any specifications regarding the diameter of the microphone handles that the Auray MC-22SN Elliptical-Style Mic Clip will accommodate. The MC-22SN is intended for use with a dynamic wired onstage microphone that has a tapered handle, such as the Shure SM58.

Q: 7. Is this the version that does both speakers and headphones? That is the one we want.

A: Yes, this version of the software can provide reference EQ for many headphone models, as well as for speakers in your room. A demo of the software is available here: https://bit.ly/3H7fyen

Q: 8. With the Gripper, what cable do I need to get this to Power Canon Cinema EOS C300 Mark II?

A: Switronix makes a special D-Tap to LEMO Power Cable specifically for the C300 Mark II. You could try using this cable to power the C300 Mark II with the GR-100 Clip-on Battery.

Q: 9. How long can the battery keep the c200 alive?

A: This is a 100 Wh battery and the C200 has a typical power consumption of 19.3 Watts while recording. You should expect to get around 5 hours of recording time with this battery.

Q: 10. Can I charge the battery with any d-tap charger or it has to be the Gripper Series Charger?

A: No, I highly suggest using the dedicated charger for the unit at it is rated and regulated properly to charge the unit within a 3-4 hour window. Gripper Series Gripper Single Battery Fast Charger https://bhpho.to/3rXPyM4 using a third part charger could cause damage to cells in battery or worse.

Chris	11/09/2024
Needed to buy an extension for my sm7b xlr cable to clear the mic mount but that has nothing to do with the product just something you should account if using the same mic. Other than that the stand is great with very very little to no noise transfer. Easy set up as well 5

anyonymous	06/08/2024
This is my first arm, but so far I like mine. Selected the Rode over the Heil because I love the company and their customer service. My podcaster mic is a little too light for this arm, but I'm sure that the pop filter will even things out. (I knew the arm was light cause my email questions was answered with a personal phone call - great service) 5

anyonymous	02/08/2024
Great desk mount mic arm for podcasting mic. Needs a heavy enough mic to counter balance but it works great mounted from the desk. Much better than the floor mic stand I had been using. 5

anyonymous	24/05/2024
This is a great compliment to the Podcaster microphone and shock mount. I mounted this into my nice office desk and with the podcaster it works great and looks very classy. A great investment! Nick 5

anyonymous	22/05/2024
I purchased this to go with my Rode Podcaster, which is one (physically) heavy mic. I do voice-overs for software tutorials. Worked like a champ out of the box. Heavyweight enough so I can swing it around and adjust it without droop either for sitting down recording or standing up. Much better than the tabletop stand I had been using. 5

HanselJr	11/05/2024
This is a great Studio Arm, I'm using it with my Samson G-track Microphone plus a pop filter and it works great. I got it to do some podcasting and voice overs. I have different people coming to do Voice overs for commercials that i've been producing and they love the fat that this arm can move 360 some of them like to stand next to the mic, they like the freedom of the mic being on this Arm. I highly recommended. 5

anyonymous	13/04/2024
Rock solid construction, doesn't sag with a Samson C03U USB Microphone with spider and a pop screen attached. Easily set up on my desk. Swings out of the way when not in use. 5

Paul from MA	08/04/2024
I am using the boom for doing radio shows out of the basement and it is a great way to free up some space on the table top. Nice to have the option to permanently mount it to the table via drilling holes or use the table edge clamp for temporary setups. Velcro straps for the cable are a great touch if you don't want to run the mic cable inside the rails. It's a quiet and sturdy unit and the mic stays where you put it (once you tighten the hardware). Couldn't be happier. 5

gabeleblanc.com	07/04/2024
What can I say? Rode makes a great studio boom arm that is probably one of the better values available. If you are looking to save money this time, and concerned that you might get something substandard, don't worry. The quality is good. It comes with two attachments. The first clamps it to your desk or table. The other requires you drill a 1/4 inch hole (maybe it's half inch or bigger), but then the fitting first right down in the hole giving you a really finished look. I went with the clamp, because I didn't want a hole in my table, but that's just me. 5