The Black D40 Studio HD LED Fixture with Edison Connector from ETC uses the patented x7 Color System, mixing 5 colors with 2 different white LEDs to create brilliant HD white light with high color-rendering qualities. Desire Studio HD luminaire produces brilliant white light that naturally illuminates talent – on screen or on stage. It comes with 40 LED emitters.

The D40 Studio HD array blends warm-white and cool-white LEDs with a touch of x7 color to give you variable color-temperatures mixing with refined white-point control and precise color rendering. The 5 colored emitters fill in the white LED spectral gaps to give you rich white light to beautifully illuminate skin tones, sets, and clothing – in person or on camera. The Studio HD luminaire offers a range of color temperatures from 800 to 20,000 K and allows you to vary lighting tint with easy green and magenta tint-control. It is suitable for indoor broadcast, theater, or architectural uses, and for use in houses of worship – where color temperature and skin-tone rendering are critical.

The D40 Studio HD LED Fixture can be configured to operate under console control for studio systems or in stand-alone settings for location lighting when a console isn't available. The user interface enables easy configuration and specific features for video and film professionals.

Sophisticated, high-definition white LED lighting

Studio HD combines warm white and cool white LEDs for variable color temperature mixing

Five carefully chosen LED colors from the Selador x7 Color System to fill in the white LED spectral gaps

IP20 rated for indoor use

User-friendly control interface with multiple modes and fixture settings

DMX512 in and thru via 5-pin XLR connectors

Rugged, die-cast all-metal housing

Easy access slots for secondary lenses and standard 7.5" (190mm) PAR accessories

Up to 10 fixtures may be linked via power in / thru connectors per 15A circuit using 1mm² cables as supplied

Requires power from a non-dim source

50,000 hour LED life (50,000 hours to 70% intensity)

Multiple control options including RGB, strobe, and console-free Master/Slave mode

15-bit virtual dimming engine provides smooth, high quality theatrical fades

Active electronic thermal management for droop-free operation

No-noise, fan-free convection cooling for use in acoustically sensitive installations

Luminaire is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free airflow around fixture housing

Additional secondary lenses available for multiple beam spread options

Studio control mode allows fixtures to be operated with no DMX console required

Related Questions and Answers

Q: 1. Can you order barn doors for this?

A: You could use these barndoors with that light. https://bhpho.to/2Iuk4Y9

Q: 2. does this zoom?

A: No, this model does not have the ability to zoom.

Q: 3. What globe does it take please? Thank you so much!

A: You can use one of these HPL lamps https://bhpho.to/2Mn03Wp.

Q: 4. What batteries are you using on the Arri sky panel s30? And what volt are your batteries?

A: According to the user manual included with the ARRI SkyPanel Battery Adapter Plate, you may use an Anton/Bauer or V-mount battery that has a voltage of 14.4V, with a minimum of 100 Wh. 210 W is nominal, while 240 W is the maximum recommended for usage with the ARRI Anton Bauer Battery Plate for Skypanel S30 and S60 LED Soft Lights, B&H # ARBPABSP, or the ARRI V-Mount Battery Plate for Skypanel S30 and S60 LED Soft Lights, B&H # ARBPVMSP. Always use two batteries of the same type, age, and state of charge.

Q: 5. Does it include a tripod as a stand?

A: No, this does not include the stand.

Q: 6. Does this unit come with a lens tube?

A: Unfortunately, this fixture does not include a lens tube. One such lens tube that can be used is the ETC Enhanced Definition Lens Tube for Source 4 Black Ellipsoidals, Black - 50 Degrees B&H # ET450EDLTB. An image is shown below for reference.

Q: 7. does this come with a pipe clamp?

A: While a clamp is not included, the Altman Malleable Iron Pipe Clamp B&H # AL510 is compatible. https://bhpho.to/2IZGZMl

Q: 8. Does this also work with the Redback version of the Hudson Spider?

A: Yes, this Hudson Spider 7' Umbrella can work with the Redback.

Q: 9. Can the LED be changed out when the lifespan is up?

A: The LED array in the ETC Source Four LED Series 2 Lustr is not user-replaceable. The unit would have to be returned to ETC if replacement of the LED array is required.

Q: 10. reviews of etc4?

A: Unfortunately, none of our customers have reviewed this product yet. Please check back periodically for any updates.