The black D40 Studio Daylight LED Fixture with Edison Connector from ETC uses efficient white LEDs to create high volumes of daylight-balanced light with far less energy than a traditional halogen or tungsten light would use. This luminaire produces brilliant white light that naturally illuminates the talent – on screen or on stage via its 40 Luxeon Rebel ES LED emitters. The 5,600K light from this luminaire mimics HMI daylight fixtures, while using a mere 110W of power. It is suitable for indoor broadcast, theater, architectural uses, and for use in houses of worship – where color temperature and skin-tone rendering are critical.

The D40 Studio Daylight LED Fixture can be configured to operate under console control for studio systems or in stand-alone settings for location lighting when a console isn't available. The user interface enables easy configuration and specific features for video and film professionals.

Contains 40 5,600 K LEDs for high-intensity, non-variable cool-white output

IP20 rated for indoor use

Rugged, die-cast all-metal housing

User-friendly control interface with multiple modes and fixture settings

Easy access slots for secondary lenses and standard 7.5" (190mm) PAR accessories

DMX512 in and thru via 5-pin XLR connectors

Up to 10 fixtures may be linked via power in / thru connectors per 15A circuit using 1mm² cables as supplied

Requires power from a non-dim source

50,000 hour LED life (50,000 hours to 70% intensity)

Uses rebel ES white light emitters for higher output

15-bit virtual dimming engine provides smooth, high quality theatrical fades

RDM functionality for address and setting changes

Active electronic thermal management for droop-free operation

No-noise, fan-free convection cooling for use in acoustically sensitive installations

Luminaire is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free airflow around fixture housing

Additional secondary lenses available for multiple beam spread options

Studio control mode allows fixtures to be operated with no DMX console required

Related Questions and Answers

Q: 1. What is the maximum height of the tripod?

A: maximum height is 6.5 feet

Q: 2. How does this compare with the Raya 45W Led Daylight Bulb? I see that the lumens are higher on this 60W bulb, but the CRI is much lower. Will it get good accurate color for product shots?

A: This does have a bit higher CRI than the 45w. If you are concerned I would go with the higher CRI.

Q: 3. What is the output of these lights, how big is the rolling case and what is the overall weight?

A: According to FotodioX, each head in the FotodioX Pro LED-100WB-56 Studio 5600K LED 3-Light Kit has an photometric output of 6,400 lux/m (or 640 foot-candles) using the included reflector and set to 100% full output. The weight of each light fixture is approximately 13.5 lbs (the light head is 7.8 lbs and the power pack is 5.75 lbs). The total weight of the kit is 53.5 lbs, and the approximate dimensions of the included case is 12 inches x 10 inches x 32 inches (LxWxH).

Q: 4. What battery would power this?

A: There is no battery option, the Nila Boxer Daylight LED Fixture (No Accessories Included) is an AC powered light.

Q: 5. Does this kit come with a remote? It says it does on the tutorial video, however its not listed.

A: According to FotodioX, the FotodioX Pro LED-100WB-56 Studio 5600K LED 3-Light Kit with 20 x 20 Softboxes comes with a remote for each light fixture. It is a simple remote with four buttons that offer a function for each. The functions include dimming, intensify, half-power, and off. Each light comes with its own programmed remote, so in order to control all three lights, you would need all three remotes included in the kit.

Q: 6. How far out does the light reach?

A: I use it at pretty close range but the furthest Ive used (and still had pretty strong light) is about 20 feet on full brightness

Q: 7. Can this bulb be used with a dimmer?

A: No, the Raya 60W LED Daylight Studio Bulb does not work with a dimmer.

Q: 8. I have a panasonic gh4 which has a hot shoe mount on it - will this light fit? Or will i have to buy additional mounts

A: This fits all standard flash mounts. It is not a hot shoe, but fits the mount well.

Q: 9. Do these lights flicker/strobe?

A: No.

Q: 10. Two of the eight bulbs I purchased rattle when you move them. They still work but the rattling sound concerns me. Does anyone have experience with this?

A: The Raya 60W LED Daylight Studio Bulb, should not have a rattling noise.