The white D40 Studio Daylight LED Fixture with Stage Pin Connector from ETC uses efficient white LEDs to create high volumes of daylight-balanced light with far less energy than a traditional halogen or tungsten light would use. This luminaire produces brilliant white light that naturally illuminates the talent – on screen or on stage via its 40 Luxeon Rebel ES LED emitters. The 5,600K light from this luminaire mimics HMI daylight fixtures, while using a mere 110W of power. It is suitable for indoor broadcast, theater, architectural uses, and for use in houses of worship – where color temperature and skin-tone rendering are critical.

The D40 Studio Daylight LED Fixture can be configured to operate under console control for studio systems or in stand-alone settings for location lighting when a console isn't available. The user interface enables easy configuration and specific features for video and film professionals.

Contains 40 5,600 K LEDs for high-intensity, non-variable cool-white output

IP20 rated for indoor use

Rugged, die-cast all-metal housing

User-friendly control interface with multiple modes and fixture settings

Easy access slots for secondary lenses and standard 7.5" (190mm) PAR accessories

DMX512 in and thru via 5-pin XLR connectors

Up to 10 fixtures may be linked via power in / thru connectors per 15A circuit using 1mm² cables as supplied

Requires power from a non-dim source

50,000 hour LED life (50,000 hours to 70% intensity)

Uses rebel ES white light emitters for higher output

15-bit virtual dimming engine provides smooth, high quality theatrical fades

RDM functionality for address and setting changes

Active electronic thermal management for droop-free operation

No-noise, fan-free convection cooling for use in acoustically sensitive installations

Luminaire is designed for continuous operation up to 104°F (40°C) ambient temperature and requires free airflow around fixture housing

Additional secondary lenses available for multiple beam spread options

Studio control mode allows fixtures to be operated with no DMX console required

Related Questions and Answers

Q: 1. Would this be good to use with color gels?

A: Sorry, I'm a real newbie to a SLR. I bought these to light a studio setup for filming fine art with my new EOS Rebel T6i but so far I have been unsuccesful because I haven't enen learned how to use the camera yet.The lights seem to put out quite a good amount of light that is adjustable with a dial. They also have a slotted carrier in the front that uses either a frosted lens or a orange lens to filter the light.I think they will suffice for my purposes once I figure this whole thing out. Good luck!

Q: 2. How does this compare with the Raya 45W Led Daylight Bulb? I see that the lumens are higher on this 60W bulb, but the CRI is much lower. Will it get good accurate color for product shots?

A: This does have a bit higher CRI than the 45w. If you are concerned I would go with the higher CRI.

Q: 3. how are colors controlled with this lighting setup?

A: These lights are 6500K, however a 4300K amber filter is included.

Q: 4. I'm new to this. Do these lights work with a softbox or an umbrella? How would a softbox or umbrella connect to these lights?

A: A softbox you can adapt to one of these lights is the Westcott Halo Round Softbox - 45" (115 cm) B&H # WEHR45. To adapt it properly, I would also recommend the Impact Deluxe Umbrella Mount with Adjustable Shoe B&H # IMDUBAS and a Impact Heavy-Duty Air-Cushioned Light Stand (Black, 9.5') B&H # IMLS96HABI. https://bhpho.to/2GEaqlZ https://bhpho.to/2cB3xnx https://bhpho.to/2sBadFe

Q: 5. Is there ArtNet support via WiFi?

A: The Raya 60W LED Daylight Studio Bulb does not offer ArtNet Support via Wi-Fi.

Q: 6. Is it fix for my nikon D7000 ?

A: Yes, the Bescor LED-70 Dimmable 70W Video & DSLR Light will fit on the Nikon D7000's hot shoe for usage.

Q: 7. Would the bracket fit on a dslr with a battery grip?

A: While it would depend on which camera you own, as a rule, I would not recommend using the Vello CB-510 Dual Shoe Bracket in the kit with a DSLR camera with a battery grip. If you are using one of the smaller, entry level cameras that may have a battery grip, it may fit (all depending on where the screw to connect the bracket to the grip and if it provides enough clearance for the flash). However, most entry level cameras do not have battery grips, and the mid-size cameras with grips would be too large for use. This would specifically depend on the equipment you own, but the safe rule is to use it without the battery grip on your camera.

Q: 8. Will it mount on Nikon D5300

A: Yes it should. It has a standard mount. But it will always be on. It is not triggeable.

Q: 9. Two of the eight bulbs I purchased rattle when you move them. They still work but the rattling sound concerns me. Does anyone have experience with this?

A: The Raya 60W LED Daylight Studio Bulb, should not have a rattling noise.

Q: 10. Can this bulb be used with a dimmer?

A: No, the Raya 60W LED Daylight Studio Bulb does not work with a dimmer.