This 6' 12G-SDI 8K BNC Coaxial Cable from Genustech is compatible with video signals up to 12G-SDI 8K. Each end of this coaxial cable has a male BNC connector with a gold-plated pin.

RG6/18 AWG Coaxial SDI Cable    6' Length    BNC Male Connectors/Gold-Plated Pins    For 12G-SDI, HD-SDI & SD-SDI Signals

6' 12G-SDI coaxial cable supports up to 8K video signals

Male BNC connector with a gold pin on each end

Related Questions and Answers

Q: 1. Will it down convert two separate 6G SDI inputs into two separate 3G SDI outputs? What about four to four of the same scenario?

A: No, the AJA 12GM 12G-SDI to/from SDI Muxer/DeMuxer reclocks signals and does not convert down or up. You will need an AJA UDC Up/Down/Cross Converter which handles one signal at a time.

Q: 2. Can this cable be used for charging Fuji X-T5 camera?

A: Yes, the Angelbird USB 3.2 Gen 2 Type-C to Type-C Male Cable (3.28') should work on the Fujifilm x-t5 to attach to a usb charger to charge the battery.

Q: 3. can this reclock/amplify 4 sdi signals without muxing? looking for a 4 camera distribution amp in one box.

A: Yes, the AJA 12GM 12G-SDI to/from SDI Muxer/DeMuxer can be configured as a 1x4 distribution amplifier.

Q: 4. Does this support 6k Display SDI?

A: Yes, the Lilliput Q13-8K 13.3" 8K 12G-SDI Studio / Broadcast Monitor will also be able to work with 6k resolution content.

Q: 5. can this be configured as a 4x4 distro amp to simiply pass through each signal in a 4x camera setup to extend max cable length?

A: The AJA 12GM 12G-SDI to/from SDI Muxer/DeMuxer would be a very expensive distribution box. Instead use the Blackmagic Design Mini Converter SDI Distribution, for $165.00.

Q: 6. Which Profoto Air Sync Cable (specific product/item #) do I need to purchase/require: to connect one of my Profoto Air Remote(#901031; non TTL, with 3.5mm miniphone plug for sync signal in/out) to one of my off-camera Canon 600EX-RT speedlight; to then trigger that Canon 600EX-RT speedlight (in non-optical, slave sync) to receive a nonTTL radio signal from one of my Profoto Air Remote TTL-C(#901039), which would be mounted in the hot shoe of one of my Canon 5DmkIII cameras?The result being: the triggering of both my off-camera Profoto B1 500 Air TTL (via the camera mounted Profoto Air Remote TTL-C) and the triggering of my off-camera Canon 600EX-RT speedlight (via cable connected Profoto Air Remote).Do I purchase/use one of the following Profoto Air Sync Cable:Profoto #103016 (1/4 phone male to 3.5mm miniphone male),orProfoto #103020 (male 3.5mm miniphone to male 3.5mm miniphone),or?Thank you for any help, or clarity on the Profoto product # required.Mary

A: Hi Mary Ann,You will need the Miniphone to Miniphone cable #103020.

Q: 7. will this work with Hasselblad 907x 50c? will the 90 degree connector fit into USBC on digital back?

A: Yes. This cable will fit the USB port in the Hasselblad 907X 50C.

Q: 8. Will this work with the 702 7 Bright model?

A: No, you will need a dummy battery like this: https://a href= http://www.bhphotovideo.com/c/product/1279655-REG/smallhd_pwr_adp_dca5_lemo_dtap_ki_dca5_faux_lp_e6_battery.html?sts=pi target= _blank www.bhphotovideo.com/c/product/1279655-REG/smallhd_pwr_adp_dca5_lemo_dtap_ki_dca5_faux_lp_e6_battery.html?sts=pi/a

Q: 9. Is this (BH #TECUC15RTORG MFR #CUC15RT-ORG) suitable for tethering GFX 50S II with M1 Pro macbook with-Thunderbolt 4 ports?

A: Yes, this would be the proper cable to tether your camera and computer.

Q: 10. does this include cables?

A: It includes breakout cable that provides multiple SDI inputs but it does not include any HDMI or SDI cables.