The Linkey Block from BlockBattery is a universal 14.4V, 76Wh lithium-ion battery that can power up to 10A devices via a D-Tap output. It also offers two 2.5A USB outputs that work simultaneously with the D-Tap output to power/charge mobile and other devices.

The Linkey Block can be used on a desktop or mounted in various ways. Its shape was designed to fit directly into optional RoboCup holders. A C-stand mount is included and secures to the Linkey Block, allowing you to snap it onto C-stands or most standard tripod legs. A 3/8"-16 mounting thread is provided on the top and bottom, allowing attachment to Baby pin adapters.

The Linkey Block also supports 1/4"-20 accessories via two included 3/8"-16 to 1/4"-20 screw adapters that secure into the 3/8"-16 ports. The Linkey Block is recharged in approximately 1.5 to 2 hours using an included D-Tap fast charger. BlockBattery warns that only this charger should be used to recharge the battery.

Universal 14.4V 76Wh Lithium-Ion Battery    Power up to 10A Devices via D-Tap Output    2 x Simultaneous 2.5A USB Outputs    Fits Directly into RoboCup Holders    Includes Clip Mount for C-Stands/Tripods    3/8"-16 Threads for Baby Pin Mounts    1/4"-20 Male Adapters for Accessories    D-Tap Fast Charger Included    LED Fuel Gauge    Power Switch

The digital LED fuel gauge on the Linkey Block tracks the remaining energy left in the battery. When the battery is powered on but not actively being discharged or charged, the

battery enters idle mode. In idle mode, the LEDs will cycle one at a time to conserve energy until the battery senses it is being charged or discharged. When the battery is in use, the LEDs will stay on and display the remaining energy level.

Related Questions and Answers

Q: 1. Is it possible to use this for my PL1 battery?

A: The Olympus BCS-5 charger is not compatible with the BLS1 battery. You will instead want a charger such as the Pearstone Duo Battery Charger for Olympus PS-BLS1: http://bhpho.to/ZrJk8x

Q: 2. Does the battery come with a charger? I'm assuming no, but just want to confirm.

A: It does not come with a charger. You can get one here https://bhpho.to/3a1e1GF.

Q: 3. What are the little clear bottom on the side of the RL-Batt 95? It has some little dots that increase - decrease I am plugging it my I don’t see it turn on How do I know when the battery is full?

A: That is a battery test button, you push the clear button and the lights tell you how much power is left on the battery.

Q: 4. How long does it take for a full charge?

A: You will need to find the charge rate current from a specific charger to find the time. Typically, block battery chargers have a 2.5 to 3 Amp charge rate current. So a 150Wh battery will take around 3 to 4 hours to fully charge.

Q: 5. will this battery will work with the Aputure 200c light?

A: Yes, the GVM 99Wh Lithium-Ion V-Mount Battery is compatible with the Aputure 200 monolight.

Q: 6. I bought this Rotolight battery. It's solid, but the charger is separate. I also have an Indipro 95wh v-mount batt ($100 cheaper). I'm wondering if using the charger that came with the Indipro battery is okay on this Rotolight battery?

A: Yes, the IndiPRO Tools D-Tap Pro Battery Charger (16.8V, 2.5A) included with the purchase of the IndiPRO Tools 14.8V 95Wh Lithium-Ion Battery would also be compatible for use with the Rotolight V-Mount Battery for ANOVA and AEOS listed above.

Q: 7. Will this charger work with the om-d/EM 1?

A: No, this charger is not made for the OMD-EM1 battery. The OMD-EM1 use a different battery.

Q: 8. Can two of these 310s be used to run battery power to the Titan X1 on a v-mount adapter?

A: Yes you would need the Rotolight 2-Way V-Lock 24V Battery Adapter, BH # ROVL224 along with the two batteries to run a Titan X1. https://bhpho.to/3xogKW9

Q: 9. Will I be able to charge my BLS-50 battery for the olympus Pen epl8 camera?

A: Yes. This is the correct charger for the BLS-50 battery used by your Olympus PEN E-PL8 camera.

Q: 10. Is this plate compatible with the Anton Bauer 26V+ battery?

A: The BlockBattery Gold Mount Battery to B-Mount Adapter Plate supports 26V Native Batteries and should work with Anton/Bauer batteries. As long as they are Gold Mount which most are.