Protect your Canon EOS C70 camera and add a variety of accessories with this Camera Cage from Chrosziel. The cage protects your camera without blocking access to any of its features, functions, ports, or compartments. It provides numerous 1/4"-20 and 3/8"-16 anti-twist threads around the top and sides of the cage.

The C70 mounts onto the base tripod plate with 1/4"-20 and 3/8"-16 screws, and you can secure the camera on the side using an additional screw to prevent twisting. The bottom of the cage features 1/4"-20 and 3/8"-16 threads for mounting on a tripod, shoulder rig, plate, and other camera platforms. There is also a sensor plane marker on the side of the cage for accurate distance measurements.

Formfitting Camera Cage for Canon C70    Baseplate with Integrated Shoulder Pad    2 x 15mm Rods, 2 x Rosettes    Top Handle with Anti-Twist Mount    1/4"-20 and 3/8"-16 Accessory Threads

Canon EOS C70 camera

Also compatible with but not limited to:

Chrosziel Lightweight Support for Canon EOS C70 (401-C70)

Related Questions and Answers

Q: 1. Would this work with an Fs7?

A: The support is designed to work with the FS700. The rod center height will not fit properly to work with matteboxes and accessories if used with an FS7. For the FS& you will need a 303-2701 and 303-2702. These items are made for the FS7 and will allow the camera to slide on the plate for better balancing. It is VCT V lock compatible and will also slide onto ARRI style dovetail plates.

Q: 2. is it compatible with canon t7i?

A: Some elements of the SHAPE Lightweight Matte Box & Follow Focus Kit for Canon EOS R5 C, R5 & R6 would work with the Canon EOS Rebel T7i DSLR Camera, such as the matte box and the follow focus, you could probably mount the camera inside the cage as well, but it wouldn't fit supper well, as the Rebel T7i is a good bit smaller than the cameras that his rig is intended for.

Q: 3. Is there a top handle you can put on the cage?

A: Yes, the Tilta Quick Release Top Handle (Black) BH #TIAQRTHB is compatible with the Tiltaing Lightweight Camera Support Kit for Canon C70.

Q: 4. Does this cage interfere with the side-strap that comes with the camera?

A: The Tilta Tiltaing Lightweight Camera Support Kit for Canon C70 (Black) comes with a Canon shoulder strap, not a wrist strap. No wrist straps are known for this cage.

Q: 5. Hi, is this also compatible with the Tilta Base Accessory Mounting Plate for Canon C70? The screw holes seem to match up...

A: Yes, this will also be mountable on the accessory mounting plate.

Q: 6. Are the any internal customizable dividers supplied with this case?

A: Yes they are. This case includes padded pouches, dividers and a lens cup.

Q: 7. Hi, what is the entire combined weight of the cage, rods and baseplate? The specs given don't make it clear. Thanks.

A: The total weight of the Tiltaing Lightweight Camera Support Kit for Canon C70 would be - Cage, Baseplate and the two included rods is 799g or 28oz.

Q: 8. Does the Arco type plate fit onto the DJI RS2?

A: The Tiltaing Lightweight Camera Support Kit for Canon C70 (Black) (B&H# TITAT12AB) includes the Tilta Full Camera Cage for Canon C70 (Black) (B&H# TITAT12FCCB), and that cage comes with an Arca Swiss-compatible quick release plate that is designed to be screwed into the underside of the cage. In such a case, the cage could then be mounted in an Arca Swiss-compatible clamp. Now, the mounting plate that comes with the DJI RS 2 Gimbal Stabilizer (B&H# DJRONINS2) has an Arca Swiss-compatible quick release clamp. So, an Arca Swiss-compatible quick release plate attached to the underside of the Tilta cage can mount in that clamp. However, depending on your configuration, there may not be enough room for the camera to mount on the RS2 when its surrounded by the cage. In such a case, you'd need to use a longer Arca Swiss-compatible quick release plate, and possibly counterweights on the grip side (the right side from the camera operator's perspective) of the cage. But to answer your original question, yes, the Arca Swiss-compatible plate will fit into the quick release clamp of the mounting plate of the DJI RS 2 Gimbal Stabilizer (B&H# DJRONINS2).

Q: 9. Will this bag fit in an overhead bin on an airplane?

A: This bag is 21 x 13.25 x 13 for exterior dimensions, which may be just a bit to larger as Carry-On is usually 22 x 14 x 9 . You may want to look at the Pelican 1510 instead, which is designed specifically to Carry-On Specs.https://bhpho.to/2GCS4hX

Q: 10. What are the dimensions of this case

A: Dimensions for the following case are. Exterior: 21.5 x 14.1 x 8.6" (54.6 x 35.8 x 21.8 cm) Interior: 19.0 x 14.1 x 8.6" (48.2 x 35.8 x 21.8 cm)