Control your DJI RS 2, RS 3 Pro, or RS 4 Pro gimbal remotely with this Remote Control Kit from Tilta. The kit includes a remote control handle, a power supply base with mounting bracket, a remote control receiver module, a 2-pin LEMO-type cable, and a 6-pin LEMO-type cable. The handle allows you to control the settings as well as the pan and tilt of the gimbal. It is powered using a separately available L-series battery and mounts onto your rig using a rosette. The wireless receiver module allows you to wirelessly control the gimbal with the handle from up to 262' away, or you can connect the handle using the included LEMO-type cable with the receiver for wired control. The base mounts onto the bottom of the gimbal and allows you to plug in an external power source such as a high-capacity V-mount or Gold mount battery.

Open Box Products Have a Limited 2-Year Manufacturer Warranty    For RS 2, RS 3 Pro, RS 4 Pro    Remotely Control Your DJI Gimbal    Battery-Powered Remote Control Handle    Remote Control Receiver Module    Power Base & Mounting Bracket    Wired or Wireless Operation    2-Pin & 6-Pin LEMO-Type Cables Included

Install the remote control module to the NATO connector on the right side of the gimbal.

Operate from inside the car with full control. The maximum control distance is 262.5'.

Provides more precise control under complex situations such as going through tunnels. Use wired control when equipped with a long-distance setup such as a car mount, jib, Russian Arm, etc.

The side holding bracket provides additional protection for your camera during high-speed driving and bumpy shooting conditions, while the power supply base plate provides constant powering for the gimbal.

The left NATO rail on the monitor bracket is compatible with the focus handle and Nucleus Nano hand wheel controller.

Compatible with a car mount, dolly, cable cam, Russian Arm, and more.

Compatible with the separately available Hydra Alien Monitor Bracket to support gimbal remote control during car mount shoots.

Related Questions and Answers

Q: 1. Can I use this adapter with Tilta Advanced Rear Operating Control Handle for DJI RS 3 Pro/RS 2?

A: No, because the Tilta Advanced Rear Operating Control Handle takes both NATO rails on the gimbal and the Tilta Power Supply Base Plate needs one of the gimbal's NATO rails.

Q: 2. Can I power this with a 14.8V battery? I have the Core SWX Hypercore NEO Slim 98Wh Gold mounts and I am hoping they will work?

A: Yes, you can use any block battery with a D-tap port to pass power through the Tilta Power Supply Base Plate.

Q: 3. Does anyone know if this will work with the new RS4 (non-pro)? Thank you.

A: At this time the Tilta Power Supply Base Plate for Select DJI Gimbals is not compatible with the DJI RS 4 Gimbal Stabilizer (BH #DJRS4).

Q: 4. Does the power cable come with it, and if so how long is it?

A: The Tilta Power Supply Base Plate for DJI RS 2 comes with a D-Tap to 2-Pin Power Cable that is15.7".

Q: 5. Can we hold this dual-handle bracket upside down and attach this to an Easyrig MiniMax?

A: Yes you can.

Q: 6. What d-tap to 2 pin cable would be suitable that is 36 inches or longer?

A: As long as the cable is labeled as a D-tap to 2-pin LEMO cable, you're fine.

Q: 7. My Teradek 2 pin lemo to AC plug powers this base but when I hit the lock/sleep button the power cuts out. Insufficient voltage?

A: The Tilta Power Supply Base Plate for Select DJI Gimbals requires 13-17V DC power via the 2-Pin LEMO connection and the Teradek 2-Pin LEMO to AC Adapter Cable only supplies 9V DC. It would be recommended to use the included D-Tap to 2-Pin LEMO adapter with a battery with a 14.8V D-Tap port for proper function.

Q: 8. What shock absorber is that in the picture?

A: The image of the Tilta Power Supply Base Plate for Select DJI Gimbals shows the Tilta Hydra Alien Shock-Absorbing Head with Soft Spring Module, for vibration isolation on the rig.

Q: 9. Will this work with the RS 4 pro?

A: The Tilta Power Supply Base Plate for Select DJI Gimbals is compatible with the DJI Ronin RS4 Pro.

Q: 10. What AC power supply can be used to power the Tilta Power Base Plate that will support the power demands of the DJI RS 2?

A: The baseplate requires 13-17 volts. The wall power 2 pin power adapters we list offer 12 volts or less. What can be a route to consider is adapting 4 pin xlr power supply to 2 pin lemo. Example of product pairing are SmallHD XLR AC Power Adapter for SmallHD 13, 17, and 24" Monitors BH #SMPAXLR15V6A • MFR #PWR-ADP-XLR-15V-6A. https://bhpho.to/2VGy7Ec TecNec 2-Pin LEMO to 4-Pin Male XLR Teradek Power Cable for Teradek Series Cube (24") BH #TETDPWR32 • MFR #TD-PWR3-2. https://bhpho.to/3tCQciJ