Connect more devices and access memory cards with the 2-Port USB 3.1 Gen 1 Hub with HDMI Port, Power Delivery, and Card Readers from Sabrent. This hub features USB 3.1 Gen 1 and 2.0 Type-A ports as well as a power-only USB Type-C port delivering up to 60W of output. An HDMI port is also present, supporting resolutions up to 4k at 30 Hz. Separate card reader slots provide easy access to compatible SD and microSD memory cards. Connecting to a host via an integrated UBS Type-C cable, this hub is bus powered and is plug and play with computers outputting video over USB Type-C in alt mode. It supports Windows 10 and later and Mac OS X 10.10 and later.

1 x USB 3.1 Gen 1 Type-A Port    1 x USB 2.0 Type-A Ports    1 x 60W USB Type-C Power-Only Port    1 x HDMI 2.1 Port    SD & MicroSD Card Readers    Supports Resolutions up to 4K @ 30 Hz    USB 3.1 Gen 1 Type-C Host Connection    Bus Powered    Plug & Play    Compatible with Windows & Mac

USB 3.1 Gen 1 features a maximum throughput of 5 Gb/s and is synonymous with USB 3.2 Gen 1 and USB 3.0.

Related Questions and Answers

Q: 1. Does Sabrent HB-UM43 USB 3.0 Hub support USB 3.0 UASP and Turbo mode? Can I plug external HDDs and SSDs into it? Are there any caveats I should know about?

A: I use it to plug in my flash drives and hard drive at the same time to transfer data between the two since the ports on my macbook are too close together to make it all fit. It's been really good so far and I'm happy with it.

Q: 2. Good for gaming? i want a high speed rate that i can play super smashbrothers on and each small input means alot

A: I've got my Rumble Pad connected to it and haven't experienced any problems.

Q: 3. Can this device be externally powered?

A: For AC, 'externally powered' hubs, you might want to look at: https://a href= http://www.bhphotovideo.com/c/product/1192264-REG/iogear_guh304p_met_al_usb_3_0_type_a.html target= _blank www.bhphotovideo.com/c/product/1192264-REG/iogear_guh304p_met_al_usb_3_0_type_a.html/a and https://a href= http://www.bhphotovideo.com/c/product/1265184-REG/xcellon_usb_7phd2_7_port_aluminum_usb_3_0.html target= _blank www.bhphotovideo.com/c/product/1265184-REG/xcellon_usb_7phd2_7_port_aluminum_usb_3_0.html/a

Q: 4. Does this work with new M1 Mac Mini?

A: Yes, the Mac Mini has 2 x USB Type-A (USB 3.1 / USB 3.2 Gen 1) so it would be plug and play.

Q: 5. How long is the cable?

A: The Sabrent 3-Port USB 3.1 Gen 1 Hub with HDMI Port and Power Delivery's integrated cable is seven inches long.

Q: 6. Can I transfer data between devices that are both hooked into this hub?

A: It would depend on the device. You can transfer data between drives, but not multiple computers.

Q: 7. Does this work with Chromebooks?

A: Yes, the Sabrent 4-Port USB 3.0 Hub with Power Switches BH #SAHBUM43 works with Chromebooks.

Q: 8. What kind of plug does the passthrough adapter use? (Picture is confusing)!

A: IOGEAR says: The GUH3C4PD is a USB C device. PD Pass through would be a USB C connection . Thank you for choosing IOGEAR.

Q: 9. Does this hub support 5gbps per port or 5gbps over the whole hub?

A: It's up to 5 Gbps overall, not per port.

Q: 10. Would this work with SDXC cards? One photo shows an SDXC (with an upside down sticker), the specs say "unspecified".

A: Yes, the Sabrent 2-Port USB 3.1 Gen 1 Hub with HDMI Port, Power Delivery, and Card Readers is compatible with SDXC cards.