The 25" MXC425/C Gooseneck Microphone from Shure is a cardioid microphone for use with the Microflex Complete (MXC) digital conference system and the Microflex Complete Wireless (MXCW) conference system (sold separately). This MXC gooseneck mic has a flexible section at the bottom and a straight section at the top to provide easy adjustment while maintaining a streamlined appearance in meetings and conferences.

In addition, the MX-series microphone cartridge delivers accurate voice capture and offers CommShield technology that rejects RF noise. An integrated bi-color LED indicates the microphone status. The microphone is detachable with a 10-pin modular connector. When used with compatible conference units, the MXC425/C microphone can be locked with a hex key to prevent unauthorized removal.

For Microflex Complete Conference System    Cardioid Microflex Capsule    Flexible Bend at Bottom of Gooseneck    CommShield Technology for Immunity to RF    High Close-Talk SPL Level    Two-Color Illuminated Light Ring    10-Pin Modular Connector    Snap-Fit Foam Windscreen Included    Low Self Noise

Compatible with MXC and MXCW conference units only

10-pin modular lockable connector

Gooseneck bends at the bottom only

Cardioid polar pattern (also compatible with MX-series microphone cartridges)

Bi-color light ring indicates microphone status

CommShield Technology for improved RF filtering

Foam windscreen included

Related Questions and Answers

Q: 1. how many wires are inside this mic. I need a mic with 2 wires plus a ground?

A: There are no wires that get connected the Astatic 119S Cardioid Dynamic is based on a 3 pin XLR input system. Please review the following item Senal CXBS-1 Desktop Base for Gooseneck Microphones BH #SECXBS1 • MFR #CXBS-1 https://www.bhphotovideo.com/c/product/1366993-REG/senal_cxbs_1_base_for_senal_cx.html

Q: 2. Why does this picture appear to have two separate Mics in it. Does one fit inside the other? No real explanation on site...

A: This product shot is for one gooseneck microphone. The product image was provide by the manufacturer.

Q: 3. Will this work on a standard PA system or does it require a pre-amp?

A: This can connect to a standard XLR mic connection on a mixer. The mixer must provide 48v phantom power to run.

Q: 4. what country is this microphone made in?

A: This microphone is manufactured at Shure's factory in Mexico.

Q: 5. Where are these made?

A: These are made in Mexico.

Q: 6. Hi, is A27M Stereo Microphone Adapter included in this set?

A: Yes It was included in the one that I bought.

Q: 7. Would this mic work well for Podcasting, Virtual Meetings, Speech Videos? If not, would you recommend the Shure Sm57 or Sm7b?

A: Yes and Maybe. As a podium mic, which requires 48V phantom power, this mic MAY be a good choice, providing that it is connected to a device providing 48V phantom power, an audio interface or an audio mixer (with USB out) would be required to connect this mic to a computer. Examples include: https://www.bhphotovideo.com/c/product/1479273-REG/focusrite_scarlett_solo_3g_scarlett_solo_usb_audio.html https://www.bhphotovideo.com/c/product/1251143-REG/shure_mvi_a_ltg_mvi_digital_audio.html/specs The Shure SM57 or SM7B are good choices, though are less sensitive mics, so require very close proximity (3-8") to the subject. These do not require phantom power, but would still require an audio interface to a computer. These 2 mics MAY also benefit greatly by using a Cloudlifter: https://www.bhphotovideo.com/c/product/1177578-REG/cloud_microphones_cl_1_cloudlifter_mic_activator.html

Q: 8. On/off switch?

A: There is not an on/off switch. It would need to either be unplugged or, preferably, muted (or turned all the way down) at the soundboard, for it to not be on. Also, this requires phantom power to operate. But all of those things are very deliberate and appropriate. Generally speaking, no mic in this class of mics anywhere has an on/off switch. Why? Because this mic is much more powerful and sensitive than a standard hand-held mic. And it is designed for picking up singers or instruments that are just out of reach to the mic anyways.. .and the act of a person just touching the mic, in a higher volume application, will easily cause a thumping sound noticeable to the audience. Again, rightly so. This is NOT suppose to have a person's mouth just a an inch or two away. That is not what this mic is for. It is for (a) recording a group of voices/instruments that are a few feet away, not inches away... so it picks up sounds that are further away than a hand held vocal mic will so. To do that, it is much more sensitive and shouldn't be touched during operation. If you have to move it during a performance, then the sound person should mute it at the soundboard during the move, your you'll hear lots of popping and cracking noises. That all being said, this is all the way it is suppose to work... if any of these things were not true, the mic wouldn't be able to accomplish its main missions very well. It does what it was designed to do VERY well at a GREAT price for the excellent quality of mic this is. i've used several of these for years and have been very happy with them.

Q: 9. Does it need phanton power to work?

A: No, phantom power is not needed for dynamic microphones like the Shure 55SH.

Q: 10. Does this microphone have a mute button feature?

A: I know this is an older question but you alter how the push button functions, so it comes from the factory as push to mute, but you can alter it to be also be push to talk or push on/off, you just open the base and slide the tiny little switch to the desired setting.