You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Custom Brackets Digital Pro-x Kit

Custom Brackets Digital Pro-x Kit
  • Product Code: ga96190
  • Availability: In Stock

$861.00 $1,205.40

This Digital Pro-X Kit from Custom Brackets makes it easy to turn your camera from landscape (horizontal) to portrait (vertical) orientation. The flash remains over the camera at all times to defeat redeye and minimize shadows. A camera plate and QR are required for use.

Rotates Camera to Portrait Orientation    Keeps Flash over Camera at all Times    Defeats Redeye    Minimizes Shadows

Parameters
Flash Bracket TypeCamera Rotating
Mounting
MountingNot Specified by Manufacturer
General
DimensionsDepth: 4.16" / 10.57 cm
Height: 9.16" / 23.27 cm
Width: 6.16" / 15.65 cm
Weight24 oz / 680 g
Packaging Info
Package Weight2.25 lb
Box Dimensions (LxWxH)13.6 x 10.3 x 4.2"

  • Built-in flash arm quick release with safety to remove flash arm off camera rotator

  • Roller bearings allow for easy rotation from horizontal to vertical

  • Black anodized aluminum for strength and light weight

  • Maintenance-free; no lubrication required

  • Eliminates red-eye and side shadows

  • Comfortable foam grip and palm grip

  • Screw for flash or flash cord with anti-twist plates

    Related Questions and Answers

    Q: 1. Is this bracket compatible with an EOS 1DX III body?

    A: Yes the Custom Brackets Digital Pro-E CMP Bracket is compatible with the Canon 1DX Mark 3.

    Q: 2. MAY I USE THIS BRACKET WITH MY CANON 7D, 430 CANON FLASH?

    A: Yes, this bracket will be compatible with your setup.

    Q: 3. Can I use this with my Sony a7II with attached Nissin i60 external flash and Rode videomic on the cold shoot?

    A: As the Rode Microphone will attach to the camera through the 3.5mm jack, if the Rode sits on the bracket, it will work just fine. It would help to put the handle of the bracket on the same side of the jack on the camera. 1. since the cable isn't so long and puller across the front of back of the camera and 2. so you don't block the handle part of the camera where all the control takes place. The Nissin must be attached to the hot shoe to work.

    Q: 4. Will this item work with the Nikon D7100?

    A: Yes, this bracket will easily work with the d7100.

    Q: 5. Is there a version of this that can accept a Manfrotto 200PL Quick Release Plate (that I always keep on my camera)?

    A: Unfortunately, you would not be able to keep the Manfrotto quick release plate on your camera when using the Custom Brackets camera bracket. You would need the Custom Brackets plate to connect the camera to the camera bracket. However, they do sell the Custom Brackets Digital PRO-SV Bracket with Manfrotto RC2 Kit, B&H # CUDGTLPSVMKT, which allows the camera/bracket combination to connect to a Manfrotto tripod heads that uses the Manfrotto RC2 (200PL) quick release system.

    Q: 6. Does the Digital Pro-E CMP Bracket compatible with Canon R3 body? Thank you

    A: Yes Custom Brackets Digital Pro-E CMP Bracket is compatible with the Canon R3.

    Q: 7. Will this work with the new Canon EOS R1?

    A: Yes. The Custom Brackets CB Digital-SB Flash Bracket will fit a large pro camera such as the Canon R1.

    Q: 8. Will this work with a canon R5 with battery grip?

    A: Yes, you can attach a Canon R5 with a battery grip onto the Custom Brackets Digital PRO-SV Bracket Kit with CMP Camera Plate.

    Q: 9. I have a Canon 70D with the battery grip. Will this work with this bracket?Thanks,Bob Halligan

    A: Yes that will work very well.

    Q: 10. How can the small and tall versions of this bracket both have a lens to flash distance of 11 inches? What are the actual heights of the vertical legs of the two brackets?

    A: According to Custom Brackets, both models do have a nominal lens-to-flash distance of 11". The Tall model is mainly for cameras with a battery grip while the Small model only accepts cameras without a battery grip.

  • There are no reviews for this product.

    Write a review

    Note: HTML is not translated!
        Bad           Good
    Captcha

    Top Bestselling Products

    Custom Brackets Folding-t Flash Bracket

    $252.00 $403.20

    Custom Brackets Tilt Head Flash Mount

    $336.00 $446.88

    Aja Rmb-10 Brackets For Mini-converters

    $297.00 $362.34

    Henry Engineering Wall Mount Brackets

    $60.00 $92.40

    Custom Brackets Digital Pro-e Cmp Bracket

    $495.00 $767.25

    Products You May Like

    Horita Rlt-50 Rs-422 To Ltc Tc Translator

    $1,637.97 $2,293.16

    Canon Colorbyte Imageprint R.e.d Software

    $1,797.00 $2,210.31