This Wheeled Hard Shipping Case with Divider Kit for Sony PXW-Z150 from Porta Brace holds your camcorder plus accessories. It features a reconfigurable divider system to customize the case as your needs change, without the hassle of getting new foam each time you reconfigure the contents. The case has built-in wheels for easy rolling on smooth surfaces. It is made from a waterproof and virtually unbreakable plastic resin with a one-inch foam interior. The dividers can be adjusted to change the configuration to match your gear and accessories, and the pillow and pouches allow you to cushion your gear so it doesn't shift during transport.

Double-hinged latches close securely to seal the case, and an integrated pressure relieve valve helps prevent issues when traveling between locations with differences in air pressure, or when traveling by air. The large, soft handle folds out of the way when not in use, making the case easy to carry and to store. The case lid and bottom have matching padlock holes for increased security, and a TSA lock helps speed you through air travel.

Wheeled, Watertight, Dustproof Case    Made of High-Strength Resin    Zippered Lid Pocket, 1" Foam Interior    Adjustable Divider System Included    Double-Hinged Latches    Integrated Pressure Relief Valve    Large Front Folding Handle    Padlock Hasps    TSA Lock

Integrated wheels make for easy rolling on smooth surfaces

The case lid features a zippered and padded pouch for carrying slim accessories

Related Questions and Answers

Q: 1. Is this the case for the Sony HXR-NX80 4K NXCAM?

A: The NX80 have very similar dimensions to the PXW-X70. The NX80 will fit in this case as well.

Q: 2. The video shows roller wheels but the photo shows off road tires...which comes with the product?

A: This one comes with built-in off-road tires. We apologize for any confusion.

Q: 3. As shown in the picture, can the foam body be pulled out of the case and turned around 180 degrees so when carried the camera body is down in the middle of the case and the mic hold is on top parallel to the carry handle?

A: Foam inserts are adhered to the interiors of such cases, and will not likely be able to be rotated without breaking the bond of the adhesive.

Q: 4. I also have a SONY NX70U. I wonder if it fits too.

A: Not that we are aware of as the PXW-X70 has a different design over the NX70U. Instead we recommend the Porta Brace PB-2550 Hard Case with Foam (Blue) for the NX70U, BH #POPB2550F. https://bhpho.to/2zqcZTO

Q: 5. It is suitable to use this to carry Bowen Flash light units? what is the max payload that can carry on? thanks

A: Lightpanels are flat, Bowen flash unit come in diferent sizes and they are are not flat. The dividers may not work for your lights. Please provide more specific and detailed information and dimentions of your gear.

Q: 6. Hello all. I have 2 questions. First, what is the weight of this wheeled case? Second, Is it carry on compliant....or check-in? Sincere thanks. Joseph Sambataro

A: Hi, this case weighs 3.4 lbs and it is not compliant with carry-on guidelines.

Q: 7. What kind Is sponge of this product?

A: It's pluck and pull foam, I believe 1/2 x 1/2 square foam. Two large sheets

Q: 8. Does anyone have the dimensions on this case? I noticed there is nothing showing under 'SPECS' on this listing. If you could give me height x width x depth. I will be putting it inside another case for transporting and need to know dimensions. Thank you.

A: Currently we are awaiting more information from the manufacturer. By looking at the illustrations and knowing the size of the PXW-X70, is it my guesstimate that the case is approximately 21 x 15 x 8 .

Q: 9. Does this mean the total height of the handle from the floor is 48.36 inches? If so, this is a full 10 inches higher than the 38.5 inch high handles on the Nanuk 960 and Nanuk 955. Is this a correct understanding?

A: The HPRC 2745 Wheeled Hard Case not including the handle exterior is 32.36 x 17.79 x 11.57" / 82.19 x 45.19 x 29.39 cm The Interior is 30.3 x 15.8 x 9.7" / 77 x 40.1 x 24.6 cm 2.04" / 5.18 cm (Lid Depth) 7.68" / 19.51 cm (Base Depth) The Nanuk 960 case and the 955 are smaller cases.

Q: 10. How much does this weigh? Specs say 7lbs, but that can't be right

A: Teh HPRC 2745 Wheeled Hard Case without Foam (Black/Blue) weighs 15.6Ibs.