You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Monoprice Entegrade Cat 7 S/ftp Double-shielded Ethernet Patch Cable (3', White)

Monoprice Entegrade Cat 7 S/ftp Double-shielded Ethernet Patch Cable (3', White)
  • Product Code: ga96731
  • Availability: In Stock

$20.85 $31.07

Surf, stream, and side-quest with speed thanks to the 3' Entegrade Cat 7 S/FTP Double-Shielded Ethernet Patch Cable in white from Monoprice. Designed to deliver faster performance than Cat 6A cables, the Entegrade Cat 7 cable sports up to 600 MHz of bandwidth and supports 10-Gigabit Ethernet. Utilizing 26 AWG strands, the Monoprice Entegrade Cat 7 measures 5.7mm in Diameter, constituting a 30% slimmer build than cables using larger 23 AWG wiring. Complementary to its profile, the inclusion of a snagless Flexboot is intended for easy insertion and removal while gold-plated contacts ward against corrosion.

Supports 10-Gigabit Ethernet    Up to 600 MHz Bandwidth    5.7mm Diameter    Gold-Plated Contacts    Limited Lifetime Warranty

Key Specs
Cable Length3' / 0.9 m
Ethernet StandardsCat 7
Connector 1RJ45 Male
Connector 2RJ45 Male
General
Cable Length3' / 0.9 m
Ethernet StandardsCat 7
Connector 1RJ45 Male
Connector 2RJ45 Male
Compatibility10GbE
Electrical
Bandwidth Rating600 MHz
Physical
Boot TypeSnagless
Outer Diameter0.2" / 5.7 mm
Contact PlatingGold

The S/FTP design of the Monoprice Entragrade Cat 7 Cable includes individual twisted pairs of wire, wrapped in foil, and then wrapped again in a supple braid screen. This double-shielding is intended to produce lower crosstalk or interference, as well as better grounding, both of which engender higher transfer speeds.

Related Questions and Answers

Q: 1. will this work on a bell & howell twenty-two 8mm movie camera?

A: As long as it isn't a super 8 or 8mm magazine camera then yeah. A lot of times they are called double 8. Just means there is a 16mm strip of film inside.

Q: 2. So, is this actually Kodak Double-X motion picture film? And, is it best processed using D-96 developer? Thanks!

A: As per Cinestill, this film replaces the original Kodak Double X film stock, but for use with 35mm still cameras. They recommend the use of D-96 developer, but you can also use developers like D-76 or HC-110.

Q: 3. Do you shoot twice on this film?

A: Yes, you do shoot twice on this film.

Q: 4. To shoot the second time in the film the first time has to be erased? Should I change de position of the film or something?

A: Before shooting, you have to physically thread the film in the camera, though the film gate, from one film spool to the other. You then shoot one half of the width of the film. When you reach the end of the spool, you must go to very dark room, rethread it again and shoot the other and unused side of the film. There is no erasing with film

Q: 5. Is shaft 7mm or 8mm? Thx

A: This is an 8mm shaft

Q: 6. Can you please tell me who in the US processes this film?

A: Hello,Check out CINELABS: We process all Regular 8mm, Super 8mm and Max 8mm films . http://bhpho.to/1dk0Hat

Q: 7. Will this film work with an auto zoom 814?

A: No this film will not work in your camera.

Q: 8. Will this format fit my Brownie Movie Camera F/2.7 Lens Model 2?

A: It probably will not-Double Super8 was a fairly rare format and I don't believe Brownie made any DS8 cameras. This filmstock was especially funky, as it came on a reel that didn't fit my DS8 Canon Scoopic and I was required to spool the film onto a more standard 100' daylight reel in a darkroom.Hope this helps

Q: 9. Will this length of double super 8 film(10m/33ft) fit in a Canon Zoom DS8 camera? This camera has a spool size of 100ft/30m, but since B&H is only selling this length, I was wondering if could just pop it in this DS8 camera with max spool size is 100ft.

A: It will work fine only keep your eye on the footage or meter counter and stop at 10 mt or 33 ft, and turn the film over -- whichever scale your camera has. I don't know the Canon but 100 ft rolls of DS8 and D8 were often sold on 16mm spools with a larger center hole. The Fomapan DS8 film comes on a spool with the smaller center hole. Worst case scenario will be to pass the film onto a 16mm camera spool or remove the spindle adapters from your camera if it has them.

Q: 10. I have a sound super 8 movie camera, can silent movie film be used in a sound camera?

A: Hello Super 8 sound film is not made anymore.However silent super 8 film can be used in any sound camera.Double super 8 film can only be shot on those cameras that are capable to shoot the double super 8 spocketed cameras.From memory only the canon scoopic ds8 and some modified bolex ds8 cameras can shoot this film format.CheesNick v

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Hosa Technology Cat 6 Ethernet Cable (50')

$179.85 $226.61

Products You May Like

Aquatech Sport Housing Tool Kit

$60.00 $72.60

Heliopan Nd Filter (bay 70, 3-stop)

$809.85 $1,230.97

Sony Alc-sh115 Lens Hood

$57.00 $76.38

Rdl Fp-spr1 Spdif Repeater And Amplifier

$635.52 $1,010.48

Dell 15.6" Latitude 3550 Laptop (silver)

$1,797.00 $2,641.59

Audix Vx10 - Handheld Condenser Microphone

$1,887.00 $2,566.32

Schneider 4 X 5.65" 4mm Red True-streak Filter

$1,174.50 $1,538.60

Se Electronics Se X1r Ribbon Microphone

$747.00 $971.10

Sony Mdr-7506 Headphones

$299.97 $359.96