Capture brilliant images at depths as great as 200' with your Nikon Z 5 mirrorless digital camera in Ikelite's 200DL Underwater Housing, which features the Dry Lock Port Mount and vacuum valve. An Ikelite bulkhead with a manual hot shoe connection enables reliable electrical triggering of optional external strobes via sync cords. Using an optional TTL hot shoe and the Nikon TTL Converter will allow for TTL operation with compatible Ikelite DS strobes; non-Ikelite strobes will still work in manual mode only.

Ergonomic mechanical controls, including push buttons, dials, and levers, afford access to all essential camera functions. Built for durability, the enclosure is made in the USA from a corrosion-resistant polycarbonate and ABS plastic blend. It is white on the front, top, sides, and bottom, but clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls. The supplied aluminum tray with a left-hand quick release grip affords improved balance and handling while offering an attachment point for an optional lighting arm.

The housing ships without a required lens port and accepts various interchangeable dome and flat ports for a broad array of lenses. For full compatibility details, see the port chart. The DL port system accommodates lenses with large diameters, and it provides added security against leaks at the surface, thanks in large part to the included vacuum valve for checking watertight integrity before the dive. You'll need to pick up the required pump to remove excess air and create a vacuum.

Depth Rating: 200'    Ikelite 5-Pin Bulkhead Strobe Connector    Manual Flash Exposure, TTL Optional    Mechanical Controls    Access to All Essential Camera Functions    White ABS/Polycarbonate Body, Clear Back    Interchangeable DL Lens Port System    Ships without Required Lens Port    Vacuum Valve Included    Made in the USA

• Depth rating of 200'
• Made by hand in the USA from a corrosion-resistant polycarbonate and ABS plastic blend
• White on the front, top, sides, and bottom to reflect sunlight and keep the camera cool when shooting on or above the water's surface
• Clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls
• Slightly positive buoyancy in fresh water
• Open-groove design suspends the rear O-ring in the natural position, allowing for easier maintenance and preventing accidental twisting or stretching
• Front-loading mounting plate enables quick camera installation and does not need to be removed for you to gain battery or memory card access
• Mounting plate has a 1/4"-20 threaded hole on the bottom for connection to an optional tripod

• Ikelite ICS-5 bulkhead connector with a manual hot shoe connection enables reliable electrical triggering of strobes
• Optional DL1 DS Link TTL Converter #46056 enables TTL operation with compatible Ikelite DS strobes
• DL1 supports rear curtain synchronization and allows exposure compensation to be adjusted using the control in the camera
• Non-Ikelite strobes, such as those from Sea & Sea, INON, and Nikonos will still work in manual mode only

• Shutter and AF-ON (back-button focus) levers are curved and extendable for comfortable use when holding the optional right-hand quick release grip
• An extra-large, soft-touch zoom knob is located next to the grip handle
• All push-button controls are machined and hard anodized aluminum to reduce weight and resist salt build-up
• Ergonomic mechanical push buttons, dials, and levers afford access to all camera functions except for joystick up/down/left/right, Fn1, Fn2, diopter adjustment dial, and DOF button
• Control symbols are laser etched into the back of the housing, so they won't fade or fall off with time
• Supereye Viewfinder enhances your view through the camera's OVF when you're wearing a mask
• You can remove the Supereye quickly if you'd like to attach the separately sold Straight or 45° Magnified Viewfinder instead
• Hard anodized aluminum tray with a left-hand quick release grip affords improved balance and handling while offering an attachment point for an optional lighting arm
• The 1/4"-20 mounts and other mounting points enable connection to a tripod and the addition of accessories
• Another 1/4"-20 threaded mount is located front and center on the housing above the port mount, allowing for the attachment of a focus light, GoPro action camera, or other lightweight equipment
• Optional Cable Grip or Aluminum Top Handle can be added for easier carrying if you're using 2 strobes

• Ships without a required lens port
• Accepts all Ikelite Dry Lock (DL) dome and flat ports, allowing you to shoot with a wide variety of lenses
• Zoom gears are available for many lenses
• For complete compatibility details, see the port chart linked above
• DL port system accommodates lenses with large diameters
• Provides added security against leaks at the surface, thanks in large part to the included vacuum valve that helps you check watertight integrity before the dive
• The #47011 pump is required to remove excess air and actually create a vacuum

Related Questions and Answers

Q: 1. Is the port system compatible with my old ports from Rebel t1i's Ikelite housing? I have an 8 dome w/port body, also have a flat port for my 60mm macro lens.

A: This housing ships with the Dry Lock (DL) port base, which will not be compatible with older Four Lock (FL) ports.

Q: 2. Hi, is this compatible with the Sony Zeiss FE16-35mm f4 lens and Sony 16-50mm kit lens? Thank you

A: Yes this would work for both lenses

Q: 3. Can this housing be used without the FCON-T02 lens?

A: The Ikelite Underwater Housing with FCON-T02 Dome for Olympus Tough TG-6 only includes the FCON-T02 Dome Port. If you need the housing with a flat port get the Ikelite Underwater Housing for Olympus Tough TG-5 & TG-6 BH #IK6233.06 • MFR #6233.06. Here is the link: https://bhpho.to/3org7Jm

Q: 4. Will this work with a metabones and canon 16-35mm?

A: Yes the Canon 16-35 f2.8 lens will fit with the Metabones adapter using these parts: https://bhpho.to/2Y725NF https://bhpho.to/2F653Lx https://bhpho.to/2Y2gaf7 And: https://bhpho.to/2Y5Cp3K

Q: 5. Can you do wide angle shots at 24mm without vignetting?

A: The Ikelite Underwater Housing for Sony Cyber-shot RX100 Mark VI is made for that camera. It has a 1" sensor with a 9 to 72mm lens and the housing is designed to accommodate that lens even a 9mm. (The Full Frame sensor Equivalent Focal Length: 24 to 200mm)

Q: 6. What length lens does this fit?

A: The Ikelite Sony A7IV pictured here does not come with the required domes/ports. For typical use, you would purchase the dome/port that matches the lens you plan on using. We are unable of sharing external links via this system, but please visit Ikelite's website and they have an extensive list of the ports required to fit the 71479 housing.

Q: 7. If I order this housing will I get a housing produced after 8/26/19?

A: All the Ikelite Underwater Housing for Sony Cyber-shot RX100 Mark VI we have in stock are new models and have been produced after 8/26/19.

Q: 8. Would this be an appropriate waterproof case for the canon rebel t6i; would it fit? If not, what would be a better option?

A: The Ikelite 200DL Underwater Housing for Canon EOS Rebel T7i with Dry Lock Port Mount (200') is not compatible with the T6i. We could get for you the Nimar Underwater Housing for Canon EOS Rebel T6i. Keep in mind none of these housings include a lens port. You have to purchase a port to match the lens you are using. For help with ports or any other underwater questions email us at uw@bhphoto.com.

Q: 9. what's required to connect my DS strobes to this camera/housing??

A: To use Ikelite DS strobes with the Ikelite Underwater Housing for Olympus Tough TG-5 & TG-6 you need to add the Ikelite 4401.3 Fiber Optic Converter for DS Strobes (3rd Generation) to your strobe. Here is the link: https://bhpho.to/3hvsXlU You also need the Ikelite Coiled Fiber Optic Cable: https://bhpho.to/3k5oubi The strobe exposure will have to be controlled manually.

Q: 10. Is this housing also compatible with the Sony A6000 camera. You mention the series but not this specific model of the series.

A: The Ikelite 200DLM/A Underwater Housing for Sony Alpha A6300, A6400, A6500 Mirrorless Camera, BH #IK6911.64. is incompatible with the Sony Alpha a6000 Mirrorless Digital Camera. Instead, get the Ikelite 200DLM/A Underwater Housing for Sony Alpha a6000 Mirrorless Camera, BH #IKUWHSAA600.