When hog hunting or competing in three-gun, at either close- or mid-range, you'll get on target quickly and accurately with the FireField 1-6x24 RapidStrike SFP Riflescope. The simple circle dot reticle in the second focal plane shows in red or green with five brightness levels, with bullet drop compensation calibrated for 5.56mm 55-grain ammo. Fully multicoated lenses deliver a sharp image, elevation and windage adjustment ranges of up to 100 MOA at 1/2 MOA per click on locking, zero-resettable turrets. The scope comes ready to use right out of the box with a cantilevered mount that yields the right cheek weld for AR platforms and a throw lever for fast zooming in response to changing circumstances. The 30mm, 6061 T6 aluminum tube is IP67 waterproof for rainy days and comes with an anti-glare honeycomb filter for sunny ones.

Red/Green Circle Dot Reticle    30mm Maintube    1/2 MOA IPC, 100 MOA Windage/Elevation    Locking, Resettable Turrets    6061-T6 Aluminum Alloy Housing    Fully Multicoated Optics    IP67 Waterproof    Cantilever Mount for AR Platforms    Magnification Throw Lever    Anti-Glare Honeycomb Filter

• 1-6x zoom magnification
• 24mm objective diameter
• Fully multicoated optics
• 102-18.2' at 100 yards linear field of view

• Second focal plane
• Red or green illumination settings
• Five brightness levels
• Calibrated for 5.56mm, 55-grain ammo
• Parallax-free at 100 yards

• 1/2 MOA per click impact point correction
• 100 MOA windage and elevation adjustment
• Pop-up lockable and resettable turrets
• Cantilever mount, 4" eye relief
• Exit pupil diameter: 15-4mm
• Diopter adjustment: +2 to -2

• 6061-T6 aluminum housing
• Anodized matte black finish
• IP67 waterproof
• Zoom throw lever, honeycomb lens filter, cantilever AR mount

Related Questions and Answers

Q: 1. Will this convert PTZ Move 4k camera to SDI video?

A: No, the Blackmagic Design 2110 IP Converter 8x12G SFP does not convert PTZ Optics Move 4k camera to SDI video.

Q: 2. Can I use the 48v power injector from Ubiquiti? My antenna needs 48v

A: Yes, you can use the 48v power injector from Ubiquiti?

Q: 3. Is this compatible with the Analog Way Ascender?

A: I have no idea! i don't manufacture either and i only have the black magic line of gear

Q: 4. Can Each port functions as an independent interface VLAN ?

A: The Ubiquiti Networks ER-X-SFP EdgeRouter X's VLAN-aware switch feature allows the EdgeRouter to tag and untag VLANs on different switch-ports. This is done by grouping the Ethernet ports under the switch0 interface and adding the VLAN values to the switch-ports. More information can be found here: https://bit.ly/4bj0BFT

Q: 5. Can I use a bidirectional SFP on this? If so, what brand would be compatible (CISCO, Netgear, etc.)?

A: The TP-Link MC220L Gigabit SFP Media Converter BH #TPMC220L is compatible with: For MC200CM: 850nm For MC210CS: 1310nm For MC220L: depends on the used SFP module For MC200CM: 62.5/125μm multi-mode fiber (≤220m); 50/125μm multi-mode fiber (≤550m) For MC210CS: 9/125μm single-mode fiber (≤15km) For MC220L: depends on the used SFP module It should work with other brands as well.

Q: 6. Is a separate SFP network connection required for each channel of video?

A: Yes, the Blackmagic Design 2110 IP Converter 8x12G SFP will require an SFP for each channel of video.

Q: 7. Is this compatible with the Blackmagic Design ATEM Talkback Converter 4K, Blackmagic Design ATEM Camera Converter and the Blackmagic Design Studio Camera 4K?

A: I have 3 of these in my Talkback Converter 4K and they work well. I was a little upset when I opened the Talkback Converter 4K and found it doesn't come with any of these modules, but that's another story. I'm only using 1080 stuff so it's not a big deal that it only passes 3G signals. As noted before though these won't work if you want to use the full 4K signal from a camera. But over 250 meters of fiber (that I've used) it sends a great 1080 signal both ways.

Q: 8. Is it neccessary to use an attenuator for very short runs (50m) or does anyone know the receiver overload power?

A: No you should not need to use anything like an attenuator when using the Blackmagic Design 3G SFP Optical Module.

Q: 9. can you plug the included power adapter into the SFP port?

A: No, only Ethernet.

Q: 10. Can I take my existing simplex SC/APC terminated fiber, convert it to simplex LC connector and use this product for input?

A: Yes, that should be possible.