The 33' BZBGear Ultra-High Speed Active Optical HDMI Cable is an HDMI 2.1-capable active optical cable and is HDCP 2.2-certified to support UHD video resolutions up to 8K @ 60 Hz as well as 4K @ 120 Hz with bandwidth speeds up to 48 Gb/s. With its ability to draw power from a connected device, this fiber optic cable doesn't require an additional power source, allowing it to extend the HDMI signal much further than a standard HDMI cable. This cable supports multichannel audio including DTS-HD Master Audio and Dolby True HD signals as well as HEAC (HDMI Ethernet), ARC (Audio Return Channel), and HDR (High Dynamic Range).

Supports 8K UHD, HDR, ARC, 3D    HDMI 2.1 & HDCP 2.2 Support    Directional Design

• HEAC, ARC, and HDR support
• HDCP 2.2 certified
• DTS-HD Master Audio and Dolby True HD signals
• Support 8K UHD @ 120 Hz, 4K UHD @ 60 Hz, Full HD, 3D, Ethernet, Audio Return Channel, HDR 4:4:4 color format, and 48 bit/px color depth
• Optical fiber HDMI cable delivers with no delay

Related Questions and Answers

Q: 1. Is this unit backward compatible with regular HD (1080) ?

A: Yes, the BZBGEAR 4x1 8K60 HDMI 2.1 Switcher can handle up to Up to 8K60 resolution not excluding 1080.

Q: 2. Does this remote trigger work only with Ikelite strobes? How about Sea and Sea YS-D2?

A: The Ikelite High Sensitivity Optical Slave Converter is ONLY compatible with Ikelite DS series strobes. This slave trigger plugs into the sync cord port on Ikelite DS strobes. All current Sea & Sea strobes have a built-in optical slave trigger so there is no need for a optical slave converter

Q: 3. POE?

A: The BZBGear Live Streaming 4K NDI PTZ Camera with Tally Lights & 25x Optical Zoom (White) has support for POE (power over ethernet).

Q: 4. Hello. Will I be able to plug this camera into a monitor or smart TV via the HDMI cable and have it display? We are looking for a simple solution for a tradeshow demo with a single camera and up to 4 TVs (using an HDMI splitter). I'm trying not to have a laptop involved. Thank you.

A: The BZBGear 4K ePTZ USB/HDMI Conference/Education Camera BH #BZGEPTZUH4K will connect to a monitor via HDMI for live viewing for your stated application.

Q: 5. is it capable of showing all for feeds at once?

A: The BZBGear 4x1 8K60 HDMI 2.1 Switcher is just a switcher. In order to do what you are asking, it would be necessary to have a matrix, such as BZBGear 4x4 8K60 HDMI 2.1 Matrix Switcher with Scaler and Audio De-Embedder (BZBG8K44MA).

Q: 6. The description says that auto-switching is supported. How does this work? As such, is the IR remote required to change the in

A: You could work with the front Input button on the BZBgear 4X1 8K UHD ULTRA SLIM HDMI 2.1 SWITCHER (8K60, 4K120HZ 4:4:4 10BIT) to control Auto-Switching. INPUT button ▪ Short press this button to circularly select signal source. ▪ Long press this button for 3 seconds to enable the auto switching mode. Pg7 Manual: https://bhpho.to/4aB5x8o

Q: 7. Does this camera have actual ePTZ functions? ie can I control virtual pan and tilt from a PTZ controller or serial control?

A: The BZBGEAR 4K ePTZ USB/HDMI Conference/Education Camera (B&H # BZGEPTZUH4K) supports ePTZ control of the 4x digital zoom function at 1080p resolution. This camera can be controlled via the included IR remote.

Q: 8. will this support ndi hx3?

A: The BZBGear Live Streaming 4K NDI PTZ Camera with Tally Lights & 25x Optical Zoom (Black) (B&H# BZA4KND25XB) is compatible with up to version 4.0 of NDI | HX. That includes all earlier versions such as NDI | HX 3.0.

Q: 9. What is the sensor size and type?

A: The BZBGear Live Streaming 4K NDI PTZ Camera with Tally Lights & 25x Optical Zoom (White) has a 1/1.8 inch SONY CMOS sensor.

Q: 10. Whats the real capacity of this battery? The B&H product page suggests its 23,000 mAh. That cannot be true. Those small batteries have capacity around 3060 mAh depending on the manufacturer and measurement conditions.

A: Sorry, but I can't be of help. I have no engineering background and just use a battery until it quits.