The 164' BZBGear Ultra-High Speed Active Optical HDMI Cable is an HDMI 2.1-capable active optical cable and is HDCP 2.2-certified to support UHD video resolutions up to 8K @ 60 Hz as well as 4K @ 120 Hz with bandwidth speeds up to 48 Gb/s. With its ability to draw power from a connected device, this fiber optic cable doesn't require an additional power source, allowing it to extend the HDMI signal much further than a standard HDMI cable. This cable supports multichannel audio including DTS-HD Master Audio and Dolby True HD signals as well as HEAC (HDMI Ethernet), ARC (Audio Return Channel), and HDR (High Dynamic Range).

Supports 8K UHD, HDR, ARC, 3D    HDMI 2.1 & HDCP 2.2 Support    Directional Design

• HEAC, ARC, and HDR support
• HDCP 2.2 certified
• DTS-HD Master Audio and Dolby True HD signals
• Support 8K UHD @ 120 Hz, 4K UHD @ 60 Hz, Full HD, 3D, Ethernet, Audio Return Channel, HDR 4:4:4 color format, and 48 bit/px color depth
• Optical fiber HDMI cable delivers with no delay

Related Questions and Answers

Q: 1. does this cable support 5.9k 12 but raw for lumix s1h

A: This cable is not compatible. The Panasonic Lumix DC-S1H Mirrorless Digital Camera uses a HDMI A (Full Size) output to connect to a HDMI monitor or display. If bandwidth is your concern, a better option would be something like the Vanco HD8K03 High-Speed HDMI Cable with Ethernet (3') BH #VAPHC218603 • MFR #HD8K03; which can be found at the following link - https://www.bhphotovideo.com/c/product/1536163-REG/vanco_hd8k03_2_1_8k_60hz_premium_hdmi.html

Q: 2. Can you record in 4k and feed sdi in 1080p?

A: No, Once the BZBGear Live Streaming 4K PTZ Camera's resolution is set to 4k all the outputs SDI and HDMI would be the same resolution and framerate.

Q: 3. Does this remote trigger work only with Ikelite strobes? How about Sea and Sea YS-D2?

A: The Ikelite High Sensitivity Optical Slave Converter is ONLY compatible with Ikelite DS series strobes. This slave trigger plugs into the sync cord port on Ikelite DS strobes. All current Sea & Sea strobes have a built-in optical slave trigger so there is no need for a optical slave converter

Q: 4. POE?

A: The BZBGear Live Streaming 4K NDI PTZ Camera with Tally Lights & 25x Optical Zoom (White) has support for POE (power over ethernet).

Q: 5. Is this unit backward compatible with regular HD (1080) ?

A: Yes, the BZBGEAR 4x1 8K60 HDMI 2.1 Switcher can handle up to Up to 8K60 resolution not excluding 1080.

Q: 6. Does it supports all video format of Sony A7S3?

A: Yes, the SmallRig 2957 Ultra-Slim HDMI Cable (21.6") would be fully compatible for use with the Sony a7S III Mirrorless Camera; as such, it would support all video formats offered by the camera.

Q: 7. will this support ndi hx3?

A: The BZBGear Live Streaming 4K NDI PTZ Camera with Tally Lights & 25x Optical Zoom (Black) (B&H# BZA4KND25XB) is compatible with up to version 4.0 of NDI | HX. That includes all earlier versions such as NDI | HX 3.0.

Q: 8. is it capable of showing all for feeds at once?

A: The BZBGear 4x1 8K60 HDMI 2.1 Switcher is just a switcher. In order to do what you are asking, it would be necessary to have a matrix, such as BZBGear 4x4 8K60 HDMI 2.1 Matrix Switcher with Scaler and Audio De-Embedder (BZBG8K44MA).

Q: 9. How many watts can through POE can they extend?

A: The Vigitron VI2401A MaxiiCopper 1-Ch High-Speed Ethernet Extender-over-Coax has POE support for EEE 802.3af 15w and IEEE 802.3at 30w. The Distance (with POE) is 3000ft (10BaseT) and 1800ft with 100baseT data rates.

Q: 10. What is the sensor size and type?

A: The BZBGear Live Streaming 4K NDI PTZ Camera with Tally Lights & 25x Optical Zoom (White) has a 1/1.8 inch SONY CMOS sensor.