Replenish the power of 1 or 4 FUJIFILM NP-T125 batteries for select digital cameras with this Four Position Battery Charger from Dolgin Engineering. The unit is capable of simultaneously charging all four batteries. It includes integrated charging plates specific to the NP-T125 and is also compatible with non-OEM versions of the battery.

The charger runs on 100-240 VAC power for worldwide use and is supplied with a power cord with a standard North American-type plug. As a battery is charged, its status is displayed in volts, capacity (Ah), and percentage of charge completed. This version of the charger features the Test Discharge Module, which adds additional testing functionality and reports true capacity after cycling the battery through charge, discharge, and recharge processes.

For FUJIFILM NP-T125 Batteries    Works with OEM and Non-OEM Batteries    Built-In Test / Discharge Module    Simultaneous, Independent Charging    Status Display in V, Ah, and % of Charge    Charge Time: 5 Hours    100-240 VAC Power for Worldwide Use

• Compatible with 1 or 4 FUJIFILM NP-T125 batteries for select digital cameras
• Works with original and non-OEM batteries
• 5-hour charge time
• LCD monitor indicates battery capacity during charging process
• Bays are fully independent and allow batteries to be inserted and removed at any time
• 100-240 VAC power operation for worldwide use
• Built-in Test Discharge Module reports true capacity after cycling the battery through charge, discharge, and recharge processes
• Includes a 12-19 VDC, 25W power port for optional 12 VDC car adapter
• Small, lightweight design makes unit easily portable

Related Questions and Answers

Q: 1. Will this work on the Switronix Hypercore Slim batteries? Charge time?

A: Yeah, it will take about 2.5-3 hours for a Hypercore SLIM.

Q: 2. Will this work with CGA-D54s, a Battery used with Panasonic DV 100 camcorder?

A: Hello Vinod, yes it is compatible with CGA-D54s models. Thx

Q: 3. What's the differences between this and regular Core SWX Mach4 4-Position Charger besides all the software part?

A: The features the Core SWX Mach4 Micro Four-Position Battery Charger (Gold Mount) BH #COMACHQ4MAI adds over the Core SWX Mach4 4-Position Charger with 4A Rapid Charge (Gold Mount) BH #COMACHQ4A is an LCD screen, cloud-based VoltBridge Mesh, adaptive charging, safefly standalone discharge, and a power supply mode.

Q: 4. How long will these last powering a Nanlite LumiPad 11?

A: These batteries will power the Lumipad for about 30-40 minutes.

Q: 5. Will this charger automatically stop charging a battery once it is fully charged?

A: The SmallRig NP-W235 Camera Battery Charger automatically stops charging a battery once it is fully charged.

Q: 6. Will this charge NP-F550 or any 500 series batteries?

A: It will work, as long as the batteries to be charged are rated 2200mAh or higher.

Q: 7. Can I use this to charge my Sony A7III via the USB-C pd out and the USB-A into my external monitor? No ground loop?

A: The ZGCINE NP-F001 Battery Adapter and Charger can safely power both the Sony a7 III Mirrorless Camera via USB-C PD and your external monitor via USB-A simultaneously. Please note that your monitor will need to be USB-A QC compatible in order to receive the full 17.1W potential power from the USB-A port.

Q: 8. The specs state that it takes 120v power, but the photo implies it also can take 12v power. Can it take 12v DC?

A: I believe the spec you are referring to is 100 to 240 VAC which means it is a multi-voltage product which will work world wide. Beyond that this will charge a pair of NP-T125 batteries.

Q: 9. Do these come with overseas plug adapters (in my case specifically for Australia)? If not can they be purchased separately?

A: This battery/charger kit does not come with international adapters. However, inexpensive packs of international adapter packs can be purchased at many locations, both with brick-and-mortar stores, and online. // Also, if there are any other technical or product related questions, feel free to contact us directly at any time at support@dracobroadcast.com.

Q: 10. What is the Power Supply switch on the back of the unit? Is it possible to power this via DC input?

A: The button will allow you to switch from charging the batteries or use the charger as a power supply through the XLR . XLR is not for charging. Also when AC is not available the charger will work as a stand alone discharger.