Streamline power delivery to your camera rig with the V-mount Power Module from edelkrone. This unit uses a separately available V-mount battery to distribute power to your camera, motion control units, and select accessories. The plate features an on/off switch, one D-Tap port, and four 2.1/5.5mm barrel DC ports for powering your 12 to 16.8 VDC devices.

The Power Module mounts quickly onto your rig using a cold shoe system with a nonslip strap. It also comes with one 5' and four 4.3' DC cables, an Allen key, a spare nonslip strap, and nine hook-and-loop cable ties.

V-Mount Battery Plate    1 x D-Tap & 4 x DC Barrel Outputs    1 x 4.3' & 4 x 5' DC Cables    Shoe Mount, 2 x Nonslip Straps    Separate On/Off Switch    2mm Allen Key, 9 x Cable Ties

Streamlined power delivery from one longer-lasting V-mount battery

One D-Tap port and four 2.1/5.5mm barrel DC ports with 12 to 16.8 VDC output

Two-piece shoe mount system for quick mounting and detaching

Related Questions and Answers

Q: 1. Can you program it on the OLED screen? Or is it only for viewing the status?

A: The screen only displays information.

Q: 2. What's the top speed the motor will go?

A: 2.5 inches per second

Q: 3. Can this be powered from a 14.4 Anton bauer battery via the Powertap to LP-E6 adaptor? I use this for Small HD monitors, my camera. It has bigger capacity and less changing batt during long time lapse or sliding shots. I want things to be centralized from a 14.4 slim broadcast battery. What is the amp draw at 9v for this Slide Module v3?

A: Yes you can use a P-tap to LP-E6 adapter to power the Slide module from your Anton Bauer Batteries. it draws 2.2 Amps.

Q: 4. Whats the difference between Headone and Pan Pro?

A: The Pan Pro supports up to 30 lb the Headone only supports up to 15 lb. The Headone can be paired with a second Headone to make a pan and tilt head (see Edelkrone Two HeadONE Units with Tilt Kit B&H # ED82467TK) The Pan Po only works on the Pan axis.

Q: 5. Is it safe to run the motor while controlling a fluid head on top at the same time?

A: That is not something we would recommend. It is possible, but it may not work very well.

Q: 6. Is it possible to mount this via 1/4-20" instead of the cold shoe?

A: Yes, beneath the cold shoe of the edelkrone Power Module (V-Mount) reveals a 1/4"-20 receiving point.

Q: 7. Is it possible to provide power to the module via the Anton Bauer P-Tap Charger that's plugged into the wall?

A: Yes, you could use a Gold mount power supply with the edelkrone Power Module (Gold Mount). However, using batteries would be more cost effective. Gold Mount wall power supply idea: Anton/Bauer Tandem-70 On-Camera AC Power/Charger BH #ANT70

Q: 8. Is it possible to power a camera from this module? Is there a known good cable to go from the power module to a Sony NP-FZ100?

A: The edelkrone Power Module (V-Mount) is designed to only power edelkrone products. However, you should be able to work with this cable: Kondor Blue D-Tap to NP-FZ100 Dummy Battery Cable B&H # KODTSA7SDBBK or DigitalFoto Solution Limited Sony NP-FZ100 Fully Decoded Dummy Coiled Cable BH #DIDC12

Q: 9. can this be used in place of the steady module if I want to also do manual slides?

A: From the Overview; " Slide Module v3 also allows you to manually adjust the positions and program the motions of your SliderPLUS (and optional HeadPLUS) by hand."

Q: 10. Can this be used to power the Headone?

A: With the proper connections, the Edelkrone Power Module (V-Mount) / (Gold Mount), can power "each Edelkrone motion combination, such as JibONE, Pan PRO and HeadPLUS, by a single power source." For use with the Edelkrone Headone you will need an LP-E6 battery dummy pack. "HeadONE & SliderONE require LP-E6 Battery Dummy Pack for Power Module compatibility." https://bit.ly/3FPEtSo