The black Rip-Tie 1/2" x 75' WrapStrap is a 75' roll of reusable cable wrap for convenient and secure cable management. It has has been successfully tested for a minimum of 200 release cycles to ensure reliable use over and over again. It is 0.5" in width and features hook-and-loop closure, and it can be cut in length as needed. Utilizing laminating technology to prevent the connecting part from coming off, the WrapStrap can be used for virtually all cables and wires with confidence.

Reusable Cable Wrap for Cable Management    75' Roll    Tested for Minimum of 200 Release Cycles    Hook-and-Loop Fastener

The hard side of the WrapStrap is called a molded hook.

The soft side of the WrapStrap is called a soft-knitted loop.

Laminating hook-and-loop technology is patented worldwide. Many budget alternatives are heat-bonded or united by using adhesive, yielding a connecting part that seems to come off easily. WrapStrap does not come off from the connecting part.

Related Questions and Answers

Q: 1. Will this work with a 2.5mm diameter cable?

A: The exact diameter of this clip is not listed, this clip was design for Sennheiser MKE 2, MKE 102, MKE 104, or MKE Platinum series lavalier microphones.

Q: 2. Is this Metric or Imperial? Wondering if this is compatible with Metric screws or not. Cartoni only use Metric but their tie down knob is too wide for my tripod legs to close completely.

A: The Sachtler Tie-Down for flowtech 100 Tripod (B&H# SAS20521100) is for use with certain (but now discontinued) bowls, so it is not possible for us to test this. However, according to the best information we could find, the thread is said to be an M10 one. As we cannot guarantee that, we recommend taking advantage of our 30 day return policy, need be: https://bhpho.to/3OkddSg

Q: 3. Why two microphones on the same clip? Is this redundancy in case of failure? Stereo? Something else? Newbie looking to learn.

A: The Sennheiser MZQ 22 Double Tie Clip can be used for mounting either one or two lavalier microphones. The included mic holders that come with the clip are removable. There are a variety of reasons for using two microphones which could be for backup in case one mic fails or for stereo audio, or two mics can send separate audio feeds to two different destinations like two separate mixers, cameras, recorders, etc., or a combination of two devices which could be required for different applications. There is no set rule for how two lavalier mics can be used, but a double tie clip like the MZQ 22 is a very handy tool that will give you the option if the need for two microphones should arise.

Q: 4. Will this work with the Sachtler FSB 10 head? Thanks!

A: Yes, the Sachtler Tie-Down for flowtech 100 Tripod can tie down the Sachtler FSB 10 Mark II Fluid Head with Sideload Mechanism (100mm).

Q: 5. Will this tie down work with Oconnor 1030/515 fluid heads?

A: The Sachtler Tie-Down for flowtech 100 Tripod is only designed to work and be compatible with Sachtler fluid heads.

Q: 6. Will this work with the Sachtler FSB 8 Mk II head?

A: No, the Sachtler Tie-Down for flowtech 100 will only work with 100mm heads. The correct tiedown is listed below. Sachtler 75mm Tie-Down Knob for FSB 75 and FSB 75 MKII Heads BH #SA75TD

Q: 7. The plastic pieces look gray on the picture. Are they really gray? Not black?

A: The Sennheiser MZQ 22 Double Tie Clip would be in the color black.

Q: 8. What is the diameter/width of the rope?

A: The rope in the Kupo Rope Ratchet Tie-Down is 0.4" in diameter.

Q: 9. Will this work with a Sachtler FSB-8 fluid head?

A: It is our understanding that all recent Sachtler tie-downs are the same so this should work just fine.

Q: 10. What is the INTERIOR length of this case?

A: Feisol lists this bag as 30 x 5½ x 5½ inches