The blue Rip-Tie 1/2" x 75' WrapStrap is a 75' roll of reusable cable wrap for convenient and secure cable management. It has has been successfully tested for a minimum of 200 release cycles to ensure reliable use over and over again. It is 0.5" in width and features hook-and-loop closure, and it can be cut in length as needed. Utilizing laminating technology to prevent the connecting part from coming off, the WrapStrap can be used for virtually all cables and wires with confidence.

Reusable Cable Wrap for Cable Management    75' Roll    Tested for Minimum of 200 Release Cycles    Hook-and-Loop Fastener

The hard side of the WrapStrap is called a molded hook.

The soft side of the WrapStrap is called a soft-knitted loop.

Laminating hook-and-loop technology is patented worldwide. Many budget alternatives are heat-bonded or united by using adhesive, yielding a connecting part that seems to come off easily. WrapStrap does not come off from the connecting part.

Related Questions and Answers

Q: 1. Will this work on aMiller Cx2 head?

A: The Sachtler 75mm Tie-Down Knob for FSB 75 and FSB 75 MKII Heads may be able to attach to the Miller CX2 Fluid Head, but it will not provide the most secure connection compared to the original tie down from Miller.

Q: 2. Would this work with DPA 4071 and 4061?

A: The Sennheiser MZQ 22 double tie clip is designed to support a lavalier mic via the cable. This is compatible with most lavaliers including several DPA models.

Q: 3. Would this also work with the Sennheiser ME2 mic? a href= http://www.bhphotovideo.com/c/product/217474-REG/Sennheiser_ME2_ME2_Lavalier_Mic_for.html target= _blank http://www.bhphotovideo.com/c/product/217474-REG/Sennheiser_ME2_ME2_Lavalier_Mic_for.html/a

A: It is not recommended for the ME-2 lavalier mice. Try this one - it is a better fit: WindTech TC-12 Dual Lavalier / Lapel Microphone Soft-Mount Tie Clips for 1 - 2mm Microphone Cable (2-Pack, Black) B&H # WITC12

Q: 4. I'm assuming these are fairly standard but would this work on a DV4 ii head? Seems like it has just a standard 3/8 Bolt

A: Yes, The Sachtler DV4 is a 75mm head and would work with the Sachtler 75mm Tie-Down Knob BH #SA75TD.

Q: 5. will this work with ace xl head?

A: Yes it does

Q: 6. If I already have a tie-down with my Sachtler 18P, do I need to buy this if I buy the Flowtech100 or will my old tie-down work?

A: Sachtler flowtech Tripods such as BH #SA5585 come with this part included. Your old tie-down may not work, but if you are purchasing BH #SA5585 it comes in the box already.

Q: 7. Is it compatible with the M 1 chip Macs?

A: No, it is not possible to use this WD 1TB Blue SN570 NVMe M.2 Internal SSD inside of an M1 MacBook. M1 MacBooks have their SSD soldered to the motherboard, it cannot be replaced.

Q: 8. Is this considered an M10 tie-down?

A: Yes, the OConnor Tie-Down for 08365 100mm Ball Base has an M10 connection.

Q: 9. Is this Metric or Imperial? Wondering if this is compatible with Metric screws or not. Cartoni only use Metric but their tie down knob is too wide for my tripod legs to close completely.

A: The Sachtler Tie-Down for flowtech 100 Tripod (B&H# SAS20521100) is for use with certain (but now discontinued) bowls, so it is not possible for us to test this. However, according to the best information we could find, the thread is said to be an M10 one. As we cannot guarantee that, we recommend taking advantage of our 30 day return policy, need be: https://bhpho.to/3OkddSg

Q: 10. Does it come with screw?

A: No, the Sachtler Tie-Down Knob for Ace & 75mm Heads does not come with screws.