The red Rip-Tie 1/2" x 75' WrapStrap is a 75' roll of reusable cable wrap for convenient and secure cable management. It has has been successfully tested for a minimum of 200 release cycles to ensure reliable use over and over again. It is 0.5" in width and features hook-and-loop closure, and it can be cut in length as needed. Utilizing laminating technology to prevent the connecting part from coming off, the WrapStrap can be used for virtually all cables and wires with confidence.

Reusable Cable Wrap for Cable Management    75' Roll    Tested for Minimum of 200 Release Cycles    Hook-and-Loop Fastener

The hard side of the WrapStrap is called a molded hook.

The soft side of the WrapStrap is called a soft-knitted loop.

Laminating hook-and-loop technology is patented worldwide. Many budget alternatives are heat-bonded or united by using adhesive, yielding a connecting part that seems to come off easily. WrapStrap does not come off from the connecting part.

Related Questions and Answers

Q: 1. What is the diameter/width of the rope?

A: The rope in the Kupo Rope Ratchet Tie-Down is 0.4" in diameter.

Q: 2. Is the WD 2TB SN700 PCle 3.0 Is the WD 2TB Red SN700 PCle 3.0 M.2 Internal NAS SSD compatibile with the Mac Mini M2?

A: No, the WD 2TB Red SN700 PCIe 3.0 M.2 Internal NAS SSD Is not compatible with the Mac Mini M2.

Q: 3. Is this compatible with Sachtler 75mm Flowtech legs?

A: Yes, the Sachtler Tie-Down Knob for Ace & 75mm Heads will work with the Sachtler 75 Flowtech legs.

Q: 4. will it fit a leica m9 with lens?

A: If the lens is 3.5 or shorter, it should fit in this pouch, yes.

Q: 5. Would this work on a Miller CX2. I want to know if I can fit it on my manfrotto legs with a 75mm bowl?

A: We are only aware of the Sachtler Tie-Down Knob for Ace & 75mm Heads being compatible with Sachtler brand Ace and 75mm bowl tripods. Sachtler's accessories tend to be specific to Sachtler and often are not compatible with other systems.

Q: 6. Is this considered an M10 tie-down?

A: Yes, the OConnor Tie-Down for 08365 100mm Ball Base has an M10 connection.

Q: 7. Will this work with a 2.5mm diameter cable?

A: The exact diameter of this clip is not listed, this clip was design for Sennheiser MKE 2, MKE 102, MKE 104, or MKE Platinum series lavalier microphones.

Q: 8. Will this tie down work with Oconnor 1030/515 fluid heads?

A: The Sachtler Tie-Down for flowtech 100 Tripod is only designed to work and be compatible with Sachtler fluid heads.

Q: 9. Will this work with the Sachtler FSB 10 head? Thanks!

A: Yes, the Sachtler Tie-Down for flowtech 100 Tripod can tie down the Sachtler FSB 10 Mark II Fluid Head with Sideload Mechanism (100mm).

Q: 10. Why two microphones on the same clip? Is this redundancy in case of failure? Stereo? Something else? Newbie looking to learn.

A: The Sennheiser MZQ 22 Double Tie Clip can be used for mounting either one or two lavalier microphones. The included mic holders that come with the clip are removable. There are a variety of reasons for using two microphones which could be for backup in case one mic fails or for stereo audio, or two mics can send separate audio feeds to two different destinations like two separate mixers, cameras, recorders, etc., or a combination of two devices which could be required for different applications. There is no set rule for how two lavalier mics can be used, but a double tie clip like the MZQ 22 is a very handy tool that will give you the option if the need for two microphones should arise.