Mount your small camcorder on ENG-style equipment and supports with the PROTECH HDS-300S Build-Up Rig from IDX. This system not only adapts your small camcorder, but it adds power in and out capabilities, so you can power your camera via 4-pin XLR, D-Tap, or a mini 4-pin connector from the integrated V-mount or 4-pin XLR input connectors. The rig also features tally and return switch functionality.

The Build-Up Rig features HD-SDI in and out connectors, as well as a 6-pin VF input connector. The included BNC cables and both 1/4"-20 and 3/8"-16 threaded screws enable you to mount your camera on this rig and then mount the entire arrangement on supports designed for ENG rigs.

Use Small Camcorder with ENG Supports    V-Mount & XLR Power Input    4-Pin XLR, D-Tap & Mini 4-Pin Power Out    Supports Tally Out & VF In

Related Questions and Answers

Q: 1. Can you power a camera from the D-tap if i want to put the V-mount on a cheese plate? I had a V-mount before that would not power the camera straight from the D-tap, so just want to make sure this isn't a common thing...

A: I doubt u can power the camera from the d tap. If im right it outputs only 5volts that may not be adequate for the camera. I may be wrong though.

Q: 2. Does this plate come with the appropriate molex adapter for the Blackmagic URSA?

A: NO adapter

Q: 3. does this work with Canon 6D?

A: Yes, with a V mount battery, this IDX System Technology P-V2 V-Mount Camera Plate can power a Canon 6D. What you need is a D-Tap to Canon LP-E6 dummy battery cable. Here are two suggestions, one good quality, one even better quality. IndiPRO Tools Power Converter D-Tap to Canon LP-E6 Dummy Battery (30 ) for SmallHD Monitors B&H # INSHPTE6. Zacuto LP-E6 to D-Tap Power Cable B&H # ZAPTZACE6.

Q: 4. Would the screw holes on the back of this suit attaching a Sony RM-B170 unit? It looks like it will, but I can't find a spec sheet detailing the dimensions of the screws.

A: Sorry, we have not heard of attaching a battery directly to a CCU before and are therefore we are unsure that what you wish to accomplish is possible. So that we may be of further assistance with your application, please email us at provideo@a href= http://bhphoto.com target= _blank bhphoto.com./a

Q: 5. Does the usb port powers up the black magic hdmi to sdi converter?Power input: 5 VDC via USB Micro-B Power consumption: 2.0 W Operational voltage range: 4.4 to 5.25 VDC

A: You can use the USB Port to power a Blackmagic Micro HDMI to SDI Converter.

Q: 6. Would this work with any battery with an Advanced port like the Core SWX 190wh bricks?

A: Yes, The IDX System Technology D-Tap Advanced Port Battery Charger would support any Battery Brand as long as it has the advanced Dtap port.

Q: 7. Will this plate work/fit with the Blackmagic Ursa camera?

A: We see no restriction as to working with the Blackmagic URSA camera. V mount and Gold mount plates are pretty much standardized.

Q: 8. The included manual states to refrain from using 3rd party chargers, is there a compatible IDX charger with more than 2 slots?

A: The SL-F series batteries are compatible with most Sony and 3rd-party chargers. We have listed compatible dual and quad chargers below. Watson Duo LCD Charger for L & M Series Rechargeable Batteries ( Dual Charger) BH #WADXSLM Dolgin Engineering TC40 Four-Position Simultaneous Battery Charger for Sony L-Series BH #DO4PCSQ Watson Pro L-Train 6-Bay NP-F Battery Charger BH #WACNPF6B

Q: 9. hi, how long would it take for this charger to charge a extra duo 190, as per picture n4? thanks

A: 7:20 according to their website. I have the 98w and their 4:20 time is accurate however I never run my batts down to 0 and my charge time is quicker as a result.

Q: 10. Is X-Tap compatible with standard P-Tap/D-Tap cables?

A: Not that we are aware of. The X-Tap only works with the X-Tap cables that IDX offers. https://bhpho.to/30fPngT