The sE Electronics V7 X is a road-ready dynamic instrument microphone offering a detailed and powerful sounds for guitar cabs, drums, and horns on stage and in the studio. Its aluminum voice coil and supercardioid polar pattern reduce the pickup of stage bleed to help you achieve high gain before feedback. Featuring neodymium magnets, tight production tolerances, and high-end workmanship, the V7 X delivers the consistency you need for great shows night after night.

The mic is equipped with an internal windscreen to help reduce unwanted wind noise and plosive pops. The integrated shockmount isolates the capsule from mechanical vibrations, effectively minimizing noise caused by inevitable microphone handling. The V7 X's all-metal construction, spring steel mesh grille, and gold-plated XLR contacts offer effective protection from the rigors of live performance and touring.

Detailed, Powerful Sound for Instruments    Ideal for Live Stage Applications    Supercardioid Polar Pattern    Dynamic Capsule with Neodymium Magnets    Low Handling Noise, Built-In Shockmount    Mesh Grille with Beveled Edge    Gold-Plated XLR Connector    Road-Ready, All-Metal Construction    Includes Mic Clip and Carrying Pouch

The V7 X is a supercardioid dynamic instrument microphone that lifts the sonic curtain in front of your sources, connecting listeners with your performance at a whole new level. The sibling to the acclaimed vocal-oriented V7, the V7 X is a dynamic instrument microphone ideal for a broad range of instrumental applications, both in the studio and on stage. Its specialized capsule's innovative aluminum voice coil and brand new acoustic design are specifically tailored for full-bandwidth instrumental reinforcement and recording, with a balance of detailed highs and deep, ultra-powerful lows, allowing for use on nearly any source from electric guitar cabinets to brass instruments, snare drums to choir, and many more.

The all-new custom DMC7 X capsule offers the same technologies and features as its sibling within the V7, including its innovative, specialized aluminum voice coil. While the V7 is optimized for vocals, the capsule in the V7 X has been custom-tuned for instrumental use. The upper frequency range is smooth and balanced, capturing every nuance of the player, while the lowered resonance and extended, powerful low-frequency response allows for a complete spectrum of instruments: 4x12 guitar cabs, toms, snares, horns, rotary organs, or any other instrument all come through loud, natural, and clear.

The supercardioid pattern of this sophisticated capsule also helps isolate your instruments from other sound sources on the stage, efficiently reducing stage bleed and ensuring copious amounts of gain before feedback.

Proven neodymium magnets, tight production tolerances, and high workmanship ensure excellent sensitivity, high-end sound quality, and superb consistency.

The V7 X's road-ready design is all metal, no plastic parts here. The chassis' high-quality, highly durable zinc alloy is designed to hold up under on-stage stress for years, and the spring steel mesh grille is dent-proof and corrosion-free for perfect reliability. The beveled edge around the grille prevents the V7 X from rolling when set down on top of an amp or the stage floor.

The V7 X's advanced internal capsule suspension efficiently decouples the capsule from mechanical vibration, isolating it from shocks and jolts and providing exceptionally low rumble and handling noise as compared to other mics in its class.

The red internal windscreen efficiently reduces unwanted wind noise. In case you prefer a more visually subtle windscreen, a black one is included as a standard accessory.

The V7 X's gold-plated XLR connector also ensures a loss-free and reliable signal connection for years to come.

Related Questions and Answers

Q: 1. I would like to use this microphone to record Voice Overs with. Can you recommend a good "pop filter" for it?

A: Here's a quality pop filter option B&H # THPF842S.

Q: 2. Is it okay to use this with a shotgun microphone that can take a battery for its phantom power, such as the Senheisser MKE 600?

A: Yes, the sE Electronics DM1 Dynamite Active Inline Microphone Preamplifier could be used to increase the gain of a battery-powered shotgun microphone such as the Sennheiser MKE 600, but doing so may overload the input connection or exaggerate the self-noise of the microphone.

Q: 3. Will it work with the Rode PSA 1?

A: This type of filter is not designed for a broadcast arm like the PSA1. This filter requires a vertical mic stand to attach to. You could use this type of desktop reflection filter, and the pull the PSA1 in front of it BH #AURFC12R.

Q: 4. will this device provide +48v Phantom power to a condenser microphone ?

A: This device is a gain booster for ribbon/ dynamic mics, and while it uses 48v to provide gain, it does not pass phantom power. If you need just phantom power for a condenser mic, here's a phantom power supply option BH #MAM48.

Q: 5. Does this kit also include the sennheiser native shockmount, and foam windscreen that usually comes in the case with the mkh50?

A: Yes, it has the boxed Sennheiser kit with the screen and a mic clip. The latter is the close-fitting clip with the standard 5/8 thread.

Q: 6. Will this device work with Sure Phantom powered shotgun mic over 180+ feet of cable?

A: Yes

Q: 7. is there a way to connect this for use directly on computer?

A: This microphone will need an inerface that can provide both phantom power and XLR to USB conversion to work with a computer.

Q: 8. Does this have the current hardware mounting upgrade from the 2016 anniversary model?

A: As of January of 2017, B&H received all new and upgraded models of the sE Electronics Reflexion Filter PRO - Acoustic Absorber.

Q: 9. Can this be used free standing on a table or does this need to be mounted on a mic stand?

A: It can be used on a table top as long as you remove the piece in the back that would attach it to your mic stand. Works very well for VOs when its flat on a desk or table.

Q: 10. Hi - Wondering if a Blue Mic Yeti will work with this mount?

A: Unfortunately not. The Radius II is required to properly shockmount the Blue yeti; B&H BLSMYPM. The pop filter is sold separately as well. The B&H# is BLTP.