The 1/4"-20 D-Ring Screws from Ikan are standard mounting screws for affixing your camera or device to the baseplate of a rig or cheese plate. The screws can be tightened using the integrated D-ring or with a flat-head screwdriver. They are sold here in a pack of three.

For Rig Baseplates    Flat-Head Screwdriver Compatible    Fold-Away D-Ring

Related Questions and Answers

Q: 1. This item does not have the same dimensions as a real Sachtler screw (I just measured one.) Sachtler plates are notorious for needing an exact screw to hold a camera tightly. Why is this being advertised as a screw for Sachtler tripods? Can you independently verify this works with Sachtler tripods?

A: The Desmond Knurled 1/4 -20 Slotted Screws have the same measurement as Satchler QR Screws, with a length of 15mm.

Q: 2. Will this handle attach to the top of the Red DSMC3 Touch 7.0 monitor?

A: No, the Bright Tangerine Top Handle for Select RED Cameras will not attach to the top of the RED DIGITAL CINEMA DSMC3 RED Touch 7.0" LCD Monitor (Direct Mount). It is important to be noted, this would damage the screen. The single 1/4"-20 mounting point with locking pins on either side is on the screen for mounting with a monitor mount only.

Q: 3. is the rubber grip removable?

A: It is not designed to be removable or replaceable.

Q: 4. can I use these screws to screw a Sirui TY-5DIIIL L-Bracket Plate to my Canon 5D III camera?

A: The person who answered the question before me is correct. It depends on how thick the floor of the plate is. Notice that the screw has a reduced diameter portion between the threaded portion and the head. That portion is 1/4 inch long. I made my own camera plate in a machine shop. I made it so that the plate is 1/4 thick. I did not have to use any spacers or washers. B & H has shorter D-ring screws that have a shorter reduced diameter section. Check how thick the floor of your camera plate is and get either a longer or shorter screw.

Q: 5. Do these screws work with the Really Right Stuff One-piece L-bracket for the Nikon Z 7?

A: Yes, the Really Right Stuff One-piece L Bracket for the Nikon Z uses standard 1/4-20 sockets, so these screws should work just fine.

Q: 6. Can this fit the Mefoto camera plates?

A: The dimensions of these screws are 0.59 x 1.06 x 1.08 (1.50 x 2.70 x 2.75 cm) You can measure the plate and hopefully the Mefoto screw to check. It seems that these might be a little large in the ring and head. Unfortunately, it is not possible for us to go to our inventory to check here at B&H. Here are all the available quick release plate screws B&H has for sale. http://bhpho.to/1UC21jQ

Q: 7. What is the distance between the mounting screws?

A: 1.4 inches

Q: 8. Will this handle fit the BMPCC 4K cage?

A: Yes, this handle is compatible with the SmallRig 2203 Full Cage for BMPCC 4K. https://bhpho.to/2U2ye73

Q: 9. What is the length of these screws?

A: Ikan lists the dimensions of the ikan 3/8"-16 D-Ring Screws as 0.59 x 1.06 x 1.08"

Q: 10. Is the cold shoe standard sized? Can i attach a regular LED light or DSLR mic in it?

A: Yes, it is a standard cold shoe size. It may be a bit shorter than ones you'd find on a camera, but the width is the same and works very well.