You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Technical Pro Wasp200l Rechargeable Portable Speaker With Lavalier Microphone

Technical Pro Wasp200l Rechargeable Portable Speaker With Lavalier Microphone
  • Product Code: ga97658
  • Availability: In Stock

$29.85 $37.01

Anywhere you go, you can amplify sound to reach your nearby audience with the Technical Pro WASP200L, a lightweight and portable speaker that can be slung over your shoulder or clipped on your clothes. Its built-in rechargeable battery delivers up to seven hours of operating time per charge and four AA batteries (available separately) can be used for backup power. A wired lavalier mic is included for convenient speech pickup, making it ideal for announcements, public address, instruction, and more.


Play files from a USB flash drive or TF card, listen to FM radio, or pipe in tunes from a smartphone connected to the 3.5mm aux input. With 100W peak power and a 3" full-range speaker, the WASP200L helps you be heard without weighing you down. You can even record the mic signal directly to a flash drive or TF card to capture live events.

Shoulder Strap for Easy Transport    Play Files from USB Flash or TF Card    3.5mm Aux and Mic Inputs    100W Peak Power, 3" Full-Range Speaker    FM Radio with Retractable Antenna    Record to USB Flash Drive or TF Card    Onboard Volume and Playback Controls    Internal 7-Hour Rechargeable Battery    Includes Wired Lavalier Microphone

Key Specs
Speaker Configuration1x Full-Range Loudspeaker
Number of Input Channels2
Amplifier Power Rating100 W Peak
Microphone Type1x Lavalier
Audio I/O1x 1/8" / 3.5 mm TRS Female Unbalanced Mic Input
1x 1/8" / 3.5 mm TRS Female Unbalanced Aux Input
USB I/O1x USB-A (Audio Recording, Media Playback, 128 GB Max)
1x Micro-USB (Built-In Battery Recharging)
Media Playback1x microSD (128 GB Max)
Portable PA System
Speaker Configuration1x Full-Range Loudspeaker
Number of Input Channels2
Amplifier Power Rating100 W Peak
Speakers
Enclosure TypeSealed
Full-Range Driver1x 3" / 7.6 cm
Signal Processing
Input PadNo
EQNo
Semi-Parametric EQNo
EffectsNo
FiltersNo
Dynamic ProcessingNo
Microphone
Microphone Type1x Lavalier
CapsuleElectret Condenser
Outputs1x 1/8" / 3.5 mm TRS Male Unbalanced
MutingNo
Performance
Frequency Range80 Hz to 12 kHz
Connectivity
Audio I/O1x 1/8" / 3.5 mm TRS Female Unbalanced Mic Input
1x 1/8" / 3.5 mm TRS Female Unbalanced Aux Input
USB I/O1x USB-A (Audio Recording, Media Playback, 128 GB Max)
1x Micro-USB (Built-In Battery Recharging)
Media Playback1x microSD (128 GB Max)
Media & File Formats SupportedRecording:
WAV
Playback:
MP3, WAV
Network I/ONo
Power
Battery Type1x Built-In Rechargeable
4x AA (Not Included)
Approximate Battery Life7 Hours
Physical
Mounting1 x Shoulder Strap
Dimensions5.1 x 3.5 x 1.75" / 13 x 8.9 x 4.45 cm
Weight1 lb / 0.5 kg
Packaging Info
Package Weight1.045 lb
Box Dimensions (LxWxH)9.5 x 7.6 x 3"

Built-in battery offers up to five hours of continual music playing or up to 7 hours with a live microphone; great for teachers, tour guides, or outdoor and mobile PA events. Use four AA batteries (available separately) for backup power. Recharge the built-in battery through the included micro-USB cable and AC wall adapter.

With 100W peak power and a 3" woofer, the WASP200L delivers a frequency range of 80 Hz to 12 kHz.

Play WAV or MP3 files from a USB flash drive or a TF card (both available separately), tune in to FM radio (retractable antenna improves reception), connect a smartphone or media player to the 3.5mm aux input, or connect the included lavalier microphone to the 3.5mm mic input.

The PA speaker features onboard volume and playback controls and an LED readout with battery info and playback time.

Record the mic signal in WAV format to your USB flash drive or TF card.

Related Questions and Answers

Q: 1. Hello,how long the battery last? thanks!

A: The power on the Pyle Pro PSBT8A lasts roughly 2 hours.

Q: 2. Hi, does this arm have the threading to attach and hold up a Blue Yeti USB microphone? Thanks.

A: No this has a 3/8" tread while the blue yeti has a 5/8" tread, however it's a very simple fix all you need is this adapter in the link bellow to make them compatible. https://www.bhphotovideo.com/c/product/284333-REG/Manfrotto_MIBA_Female_3_8_to_5_8.html?sts=pi&pim=Y

Q: 3. Will this work with bookshelf speakers that are 10" X 11" X 20"? If not what would work?

A: Since the Technical Pro MB5000Stand Studio Monitor Speaker Stand (Pair) are designed for a specific pair of speakers, I would recommend an alternative such as BH #QUBS300 QuikLok BS-300 - 5-Position Adjustable Speaker Stand.

Q: 4. Can I use several WASP270L at an outdoor event within 50 ft from each other? Will there be interference if we use wired mics?

A: The Technical Pro WASP270L Rechargeable Portable Speaker with Wireless UHF Lapel Microphone operates on a narrow UHF band, so interference is very likely if multiple units are used in close proximity. Ultimately, results may vary when using the wireless microphones based on the location, environment, and any obstructions. There should be no problem with interference if using the WASP270L with wired microphones instead of the wireless mics.

Q: 5. Can this be put on a speaker stand?

A: Yes it can be mounted on a stand

Q: 6. My microphone has a square bottom, will it hold snug or is it only for circular microphones?

A: The arm will support your microphone and the included mic clip is removable so you can use a shock mount or a different mic clip that works to hold your microphone. Without knowing which microphone you have, it is difficult to say exactly what you will need. Please contact us by phone or through live chat on the website and we can assist you to find the best option for your mic.

Q: 7. what is the dimension of the top plate and is there cable management in the upright?

A: The cable management feeds through a grooved channel in the upright column. The top plate is 4" x 5".

Q: 8. Hi, does this arm have the proper threading to attach and hold up a Blue Yeti USB microphone? Thanks.

A: Yes, the threading is compatible. For best results it is recommended to use the Blue Yeti Shock Mount with this arm.

Q: 9. Any idea how much weight these can support?

A: Unfortunately the manufacturer does not specify. However, the stand has a good center of gravity, and its base measures 4 x 5 . A speaker with a similar footprint will weigh between 5 and 7 pounds, generally speaking.

Q: 10. Will this rotate 360 Deg. When clamped to the table?

A: Yes it will.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Greentouch Klip 16gb Mp3 Player

$180.00 $226.80

Lexar Dual-slot Usb-a/c Card Reader

$44.97 $71.50

Ezquest 5-in-1 Usb Type-c Card Reader

$149.97 $197.96

Sony Sxs Card Slot Option Board For Pdw-hr1

$19,799.85 $30,491.77

Products You May Like

Flic Film Low Odor Sepia Toner (2l)

$60.51 $93.19

Moment 14mm Fisheye T-series Mobile Lens

$390.00 $549.90

Pelican 1150 Case With Foam (blue)

$164.85 $230.79

Tiffen 125mm Coarse Thread Pro-mist 4 Filter

$1,777.50 $2,755.12

Tiffen 52mm Gold Diffusion/fx 3 Filter

$161.97 $202.46

Ruike P128 Folding Knife (black)

$179.85 $235.60

Litepanels Gemini 1x1 Hard Quad Array Light Kit

$15,870.00 $22,694.10

Canon Sd-33 Printer Stand

$1,896.00 $2,616.48