Put magic and glow into your music productions, from small chambers to endless distorted echoes, with XHUN ShineVerb Reverb Processor. Designed for reverberation, spatialization, and sound-coloration purposes, this multidevice plug-in offers a set of modeled analog and digital gears, arranged inside a rackmount cabinet with a simple, easy-to-use interface.

To enhance expressiveness and versatility for any sound-design scenario, ShineVerb combines a resonator-based digital-reverberation core with a stereo-image enhancer, an analog preamplifier, and a final hybrid amplifier for further sound colorations.

For Sound Design and Mixing    ShineVerb Reverb Processor Plug-In    FilterCult Analog Filter Plug-In    Reverb, Spatialization, Sound Coloration    Models Analog Filter Technology    Easy-to-Use Interface    Mac/Windows, VST, VST3, AU

• Playing the leading role in ShineVerb is the REEVERB XT device, a digital reverberation unit with an extended set of controls. It features a special panorama-enhancer engine to finely adjust the stereo-image width of the processed sound.
• At the preprocessing stage, the PRE-AF24 unit is an analog preamplifier featuring an input signal router, an analog overdrive circuit, and a multimode (low-pass or high-pass) analog filter.
• On the postprocessing side, the MIX-DF42 unit is a hybrid amplifier made of two digital low-pass and high-pass filters, an analog saturation circuit, and a final mixer section.

• All-in-one complete setup: analog preamplifier + digital reverb unit + hybrid amplifier
• Accurate modeling of analog gear and digital devices, achieved by the adoption of the Advanced Component Simulation (ACS) technology
• Full 64-bit processing accuracy for every single aspect of the simulation
• REEVERB XT Advanced Digital Resonator Reverb
• PRE-AF24 Analog Multichannel Router / Preamp
• MIX-DF42 Multisource Mixer / Amplifier
• Multimode input signal router with gain control (from -inf up to +6 dB)
• Analog-modeled overdrive circuit with gain control (from +0 up to +18 dB)
• Analog-modeled (topology-preserving transform) multimode filter (1-pole low pass or high pass)
• Predelay engine (up to 2 seconds)
• Panorama enhancer engine, to finely adjust the stereo image width of the processed sound
• Multimode (bypass/normal/inverted) digital filter block (2-pole low pass and 2-pole high pass)
• Analog-modeled saturation circuit with gain control (from 0 up to +15 dB)
• Final mixer section with blend (dry/wet) and main volume (from -inf up to +6 dB) controls
• Including more than 30, multiscenario factory presets
• Support for sample rates from 44.1 up to 192 kHz
• Available in multisize GUI resolutions

Related Questions and Answers

Q: 1. Is there any way to use this device to scan APS negatives?

A: The Pacific Image PrimeFilm XA Plus Scanner does not have a holder for APS film, though you should be able to scan without one. Since the APS negatives are smaller, you would have to crop out the negative space in post. Alternatively, you can use a standard photo scanner, like the Epson Perfection V600 Photo Scanner (B&H # EPPV600). https://bhpho.to/3SpxXvL

Q: 2. Is it powered by battery or over cable?

A: This audio camera adapter is to be powered by an external battery usiing a 11 to 18 V, via 2-pin LEMO connection.

Q: 3. Will VueScan work with this model? Current results are contradictory.

A: At this time VuScan software does not support the Pacific Image PrimeFilm XA Plus Scanner. But they are working on it.

Q: 4. What software comes with the scanner? How easy it is to use it? Would it allow to do batch scanning?

A: The Prime Film XA Plus Scanner is very user friendly. It is capable of batch scanning negative strips of 4 or more frame or roll film up to 40 frames. The Cyberview X software can be downloaded for it.

Q: 5. Will this work with a Deity D3 Pro and a Blackmagic Pocket Cinema 4K?

A: Yes the Beachtek DXA-CINE will work with a Blackmagic Pocket Cinema 4K.

Q: 6. How do you clean the rollers or feed mechanism? How do you clean the sensor?

A: This model does not require cleaning like the PowerFilm series units, the film is loaded using a different mechanism, for more information please see our troubleshooting webpage https://www.scanace.com/product/troubleshooting

Q: 7. on the receiver end, can the speaker be non-powered?

A: This wouldn't power a passive speaker. The speaker on the other end would need an amp if it is a passive speaker.

Q: 8. I have Kodachrome slides in mounts that need to be scanned. Do I have to remove the mount on every slide?

A: The Pacific Image PrimeFilm XA Plus Scanner is capable of scanning 135 mounted slides, so you don't have to remove the mount.

Q: 9. What are the differences between this new model and the old model that it replaced?

A: The XA Plus has upgraded internal chips that make it scan up to 2.3 times faster and render colors better, also it has better USB 3 connectivity,

Q: 10. Does it work with DSLR and Mirrorless cameras?

A: This camera audio adapter is made specifically for cinema cameras with particular connections. I would consider the Beachtek DXA-MICRO-PRO PLUS Active Audio Adapter for DSLRs and Camcorders, BH #BEDXAMICROPP, which has a 3.5mm mic level output that is more appropriate for DSL or Mirrorless camera mic inputs.