Go beyond analog synth technology with the Modal Electronics COBALT8M, a powerful 8-voice hardware synth module. This synth gives you access to vintage-style analog-inspired tone, combined with a host of flexible options. Use it for sound design and tone-generation in the studio, and bring it with you to gigs for an awesome sound onstage.

With two banks of oscillators, the synth offers 34 algorithms built in, so you can construct intricate tones without the need of a computer; just rack it into your setup, or route it to a compatible keyboard, and you're good to go. A comprehensive and fully routable modulation matrix with LFOs and multiple envelope controls let you shape the sound in esoteric ways. Mangle things further with the step sequencer and built-in arpeggiator. Route sound however you wish with a bevy of I/O options. Want to engage aftertouch or utilize an MPE controller? The Cobalt8M has you covered. The COBALT8M ships with an included power supply.

8-Voice Polyphonic Synth    Virtual Analog Engine    34 Oscillators, 4-Pole Ladder Filter    300 Factory Presets, 200 User Presets    Arpeggiator, 512 Step Sequencer, and FX    LFOs, Envelopes, and Modulation Matrix    Comprehensive Audio, Sync, and MIDI I/O    MPE and Aftertouch    Included Software

Two independent oscillator groups with up to four oscillators each generate powerful virtual-analog tones and 34 complex algorithms such as Sync, Ring Modulation, Waveform Morphing, and many more.

Each algorithm has a pair of controls selected to suit the particular algorithm or character, providing you with the power of complex oscillator modulations in a spontaneous and immediately accessible way.

The newly designed self-oscillating 4-pole morphable ladder filter with resonance adds warmth and bite to the signal. Switch between the four different filter modes, get creative with the notch filter, and form unusual synth textures with the Phasor. Two different filter characteristics allow you to go from subtle to raw.

There are 3 flexible audio-rate LFOs (2 x polyphonic) can be routed to a massive amount of destinations using the modulation matrix. They can also sync to internal or external tempi. Three dedicated envelopes for the filter, amplitude, and modulation allow excessive control over dynamics and expression. Switchable envelope types provide greater options, so you can tailor each of the 3 envelopes for specific purposes.

A sophisticated 12-slot modulation matrix supports easy assignments of complex modulation routing to keep the sound evolving. Four common modulation routings are preset to free up space for your original ideas.

The integrated 512-note real-time step sequencer invites you to generate complex melodic patterns. The polyphonic 64-note step-sequencer mode enables easy step input for note and animation values. You'll find multiple sequencer trigger modes, an onboard arpeggiator (programmable up to 32 steps), and performance features such as Chord Hold, Inversions, Transpose, and Sustain Latch.

COBALT8M's rugged steel and aluminium enclosure underlines the synth's professional approach. The desktop design fits on every producer's table, and included brackets help to mount COBALT8M into a live or studio rack. For direct access of the parameters, COBALT8M features 13 switched encoders, 13 encoders, 9 buttons, and an X/Y joystick for pitch or modulation. MPE support offers new ways of creative expression for sophisticated performers.

For direct access of the parameters, COBALT8M features 29 endless knobs, 24 buttons, and an X/Y joystick for pitch changes or modulation, and MPE support, which offers new ways to express yourself creatively—for sophisticated performances.

Reshape your sounds completely with the onboard stereo effects engine. COBALT8M comes with a 3-slot FX engine with in-depth FX programming. To polish the sound, a total of 11 FX algorithms add character and depth, including chorus, phaser, flanger (positive), flanger (negative), tremolo, lo-fi, rotary, stereo delay, ping-pong delay, X-over delay, and reverb.

Set to be played in any synth environment, COBALT8M comes with all physical connections required. Control the synth using USB, monitor with headphones or using the dedicated line outputs, sync with external gear using the full-size MIDI in and out or the 3.5mm Sync inputs or outputs, and take control of your sound using the built-in Sustain and Expression inputs. By poly-chaining any two COBALT8 devices, the amount of voices is easily doubled to 16 voices and 128 oscillators.

There is plenty of room to store patches, effects, and sequence creations. Out of the box, 300 of the total 500 patches are filled with factory patch banks, carefully programmed by some of the most accomplished sound designers in the world. One-hundred customized effects configurations and sequences can be stored and applied to any sound while performing.

Bring performance to a new level with MPE support.

Related Questions and Answers

Q: 1. Is the Roku 4 - model 4400x supported by this remote?

A: Yes, this works with the Roku 4400x also known as Roku 4.

Q: 2. Does this remote have a headphone jack?

A: This remote doesn't have a headphone jack.

Q: 3. how much weight does it support stretched to the maximum

A: The Insta360 Extended Selfie Stick for ONE X and ONE Cameras can hold up to 150grams at maximum length.

Q: 4. Hello, i have purchased this item and accepted now. What i want to ask is the ten year limited warranty, how to clain this warranty and where to? It didn't come with warranty card inside?

A: Link Electronics does offer a 10 year warranty on this unit, which is a great thing to have. To use the warranty you will need to go through Link Electronic's Support Page. Here is a link, just in case you need it in the future.http://bit.ly/1Pne905

Q: 5. does this remote have a reset button in the back?

A: The Roku RCAL7R does not have a reset button on the back. It has a pairing button inside the battery cover.

Q: 6. Can this fit Dji RS2?

A: Yes, the DJI Ronin-S Extended Grip/Tripod can attach to the DJI RS2.

Q: 7. Again, is this particular part built with metal or plastic? (Not asking what tri-pod base the different packages come with) thanks

A: This product is made of metal.

Q: 8. does the Roku RCAL7R remote have a reset button in the back? Gigi

A: No the Roku RCAL7R does not have a reset button.

Q: 9. Is this compatible with Ronin-SC?

A: Yes it is.

Q: 10. Can this stick be used for Insta 360 one X2 as well

A: The Insta360 Extended Selfie Stick for ONE X and ONE Cameras can also be used for the ONE X2.