Enjoy your favorite 33 1/3 and 45 rpm records with the silver & black Pro-Ject Audio Systems Elemental Manual Turntable. Boasting an 8.6" straight metal tonearm, this turntable sports a belt drive system with a low vibration motor and low resonance platter for clean playback. Pre-adjusted tracking force and anti-skating ensure low distortion and optimal balance. A stereo RCA output allows you to connect the Elemental to the phono input on compatible sound systems or to nearly any other audio system via a preamp, available separately.

Plays 33 and 45 rpm Vinyl Records    8.6" Straight Metal Tonearm    Pre-Installed Ortofon OM 5E Cartridge    RCA Output    Belt Drive with Low-Vibration Motor    Low-Resonance Platter with Felt Mat    Pre-Adjusted Tracking Force    Pre-Adjusted Antiskating

• Belt-drive system
• Integrated motor control with DC power supply secures silent running
• Central gravity mass point made from artificial stone
• Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
• Low-resonance particle board platter with felt mat
• Ultralow mass tonearm with straight arm tube
• Pre-adjusted tracking force and anti-skating
• Gold-plated RCA contacts and cartridge pins

Related Questions and Answers

Q: 1. is the 'satin walnut' finish real wood veneer?

A: The Pro-Ject Audio Systems Debut Carbon EVO Manual Three-Speed Turntable (Satin Walnut) BH #PRDCRBETSWAL is a solid MDF plinth.

Q: 2. Is this turntable compatible with US and EU voltages/frequencies?

A: The Pro-Ject Audio Systems Debut Carbon EVO Manual Three-Speed Turntable (Satin White), BH # PRDCRBETSWHT, includes a universal power supply with 3 exchangeable sockets adapters suitable for all countries. Select the correct adapter for your country and insert the adapter to the exchangeable part of the power supply. Connect the low voltage plug from the power supply to the socket (14) on the rear of the record player before connecting the power supply to the mains.

Q: 3. Can the built-in preamp be completely bypassed so that the output of the cartridge goes directly to the output terminals on the back of the turntable?

A: Yes, the built-in preamp on the AT-LP5X can be bypassed when the preamp selector switch is set to Phono. When Line output is selected the internal preamp is active. The Phono setting is used when you are connecting to an amp with a dedicated phono input which will have its own preamp built-in or if you want to use a separate external preamp. The Line output setting is used when connecting the turntable to an amp that does not have a dedicated phono preamp so the internal preamp on the AT-LP5X will be engaged.

Q: 4. will this work on the hero 5 aswell?

A: No, the Hero 5 does not have the pin connector on the rear like the 4.

Q: 5. Does this unit have bluetooth on/off switch?

A: According to page 02 in the manual for the Pro-Ject VT-E BT R, (17) is the bluetooth on/off switch. https://www.bhphotovideo.com/lit_files/778200.pdf

Q: 6. Is the RCA output a phono output or line level output? Do I plug it into my phono jack or my line jack on my external amplifier?

A: According to page 04 in the manual for the Victrola Eastwood, it has Line Out Jacks: "For amplifier device with RCA auxiliary input sockets, insert the white and red plugs on the RCA cable into the unit. Insert the opposite end into the amplifier device. Be sure to connect the white plug to the white jack and the red plug to the red jack." https://www.bhphotovideo.com/lit_files/913715.pdf

Q: 7. IS the turntable already assembled on delivery?

A: The Technics SL-1500C Manual Three-Speed Direct-Drive Turntable (Silver), BH # TESL1500C, is shipped partially disassembled to prevent damage during shipping.

Q: 8. Does the SYNCBAC PRO's built-in battery also feed power to the GoPro?

A: Unfortunately no. The 12 hour power supply will remain within the Timecode system.

Q: 9. Does the SyncBac ensure frame accurate (jam) sync between multiple GoPros, i.e: if this was used for 360-video rigs would all camera shutters fire at the same time?

A: From the manufacturer. The SyncBac PRO enables frame accurate timecode to be embedded directly in the camera mp4 media. The SyncBac PRO does not 'genlock' the cameras in an array however, so the shutters will not be exactly firing at the same time.We have worked with Kolor's AVP software and the have added a really neat 'auto sync to timecode' mode for the camera media clips before the stitch. This feature is on v3.0 onwards. It works really well with fast results & no need to visually ID each take or clap and audio cue for each take.The other real workflow benefit is that using the pulse unit as the master 'mini base station' you can control and configure all the cameras in the rig from our free BLINK hub app - turn ON/OFF, START/STOP, set all resolutions and modes, monitor battery status and SD card status.

Q: 10. What stylus or cartridge is an easy inexpensive immediate upgrade?

A: https://www.bhphotovideo.com/c/product/1395896-REG/ortofon_concorde_mkii_mix_cc.html