Fractal Design Pop Air

Fractal Design Pop Air Mid-tower Case (black)

Product Code: ga99192
Availability: In Stock

$239.97 $295.16

Qty

12 reviews Write a review

Description
Reviews (12)

Experience a fusion of style and function with the Pop Air Mid-Tower Case in black from Fractal Design. The Pop Air melds precision engineering with dynamic design, while providing ample space for uncompromising components. Supporting ATX, Micro-ATX, and Mini-ITX motherboards, this case boasts two 5.25" optical drive bays with a magnetic cover and convenient storage tray. Install storage drives via two drive bays simultaneously supporting two 2.5" and two 3.5" drives; additional space allows you to install a third drive bay, available separately. A dedicated 2.5" drive tray provides space for two drives and can be installed behind the motherboard tray and or on the PSU shroud.

Seven expansion slots provide space for adapter cards, including GPUs up to 15.9" when a front fan is installed. This case also supports ATX PSUs and CPU coolers up to 6.7". Three 120mm fans are included, while a total of five 120mm or four 140mm fans are supported. Take advantage of liquid cooling support and install radiators up to 280mm at the front of the case, as well as up to 240mm at the top of the case when using RAM with a height of up to 1.8". The rear of the case also supports a 120mm radiator. Connect wired accessories via two USB-A 3.0/3.1 Gen 1 ports and audio input and output jacks. Or, install a USB-C port using Fractal's USB-C module, available separately.

Supports ATX, Micro-ATX & Mini-ITX Steel Frame & Side Panels 2 x 5.25" Drive Bays 2 x 3.5" Drive Bays 4 x 2.5" Drive Mounts 7 x Expansion Slots 2 x USB 3.0/3.1 Gen 1, Audio In & Out 3 x 120mm Fans Included Support for Air & Liquid Cooling Systems Supports GPUs up to 15.9" Long

Key Specs
Motherboard Support	ATX, Micro-ATX, Mini-ATX
Internal Drive Bays	2x 2.5" and 2x 3.5"
Drive Mounting (Non-Bay)	Motherboard Tray 2x 2.5" or Bottom 2x 2.5"
Expansion Slots	7x Full Height
Maximum GPU Length	15.9" / 405 mm
CPU Cooler Height	6.7" / 170 mm
Fans Included	Front: 2x 120 mm Non-LED (1200 rpm) Rear: 1x 120 mm Non-LED (1200 rpm)
I/O	2x USB-A (USB 3.0 / 3.1/3.2 Gen 1)
Windowed Panel	No
Built-In Lighting	No
Compatibility
Motherboard Support	ATX, Micro-ATX, Mini-ATX
External Drive Bays	2x 5.25"
Internal Drive Bays	2x 2.5" and 2x 3.5"
Drive Mounting (Non-Bay)	Motherboard Tray 2x 2.5" or Bottom 2x 2.5"
Expansion Slots	7x Full Height
Maximum GPU Length	15.9" / 405 mm
CPU Cooler Height	6.7" / 170 mm
Supported PSU Size	ATX
Maximum PSU Length	6.7" / 170 mm
Cooling
Fan Mounting	Front 2x 120/140 mm Rear 1x 120 mm Top 2x 120/140 mm
Fans Included	Front: 2x 120 mm Non-LED (1200 rpm) Rear: 1x 120 mm Non-LED (1200 rpm)
Maximum Radiator Size	Front: 280 mm Rear: 120 mm Top: 240 mm
Filter Locations	Front, Top
Inputs / Outputs
I/O	2x USB-A (USB 3.0 / 3.1/3.2 Gen 1)
Media/Memory Card Slot	No
Audio I/O	1x 3.5 mm Output 1x 3.5 mm Input
Display Outputs	No
Physical
Windowed Panel	No
Color	Black
Built-In Lighting	No
Cable Management Space	0.7" / 19 mm
Dimensions (W x H x D)	8.5 x 17.9 x 18.6" / 215 x 454 x 473.5 mm
Weight	15 lb / 6.8 kg
Packaging Info
Package Weight	19.145 lb
Box Dimensions (LxWxH)	21.6 x 21.1 x 12"

The vividly colored motherboard plates, drive trays and exterior accents create a fresh, expressive feel

There are two neatly concealed 5.25" bays with a storage drawer and magnetic cover

The easy-to-clean front mesh acts as a dust filter, while allowing for high airflow.

Two ultra-versatile storage trays each simultaneously support a 3.5" and a 2.5" drive. A dedicated SSD bracket for two 2.5" drives is also included.

Easy cable management with multiple tie-down points, pre-mounted cable ties and convenient extra-large pass-through holes.

Easily mounted tempered glass side panel lets you showcase your components (TG models only).

Holds radiators up to 280mm in the front, 240mm in the top, and 120mm in the rear.

The honeycomb patterned front mesh creates a striking visual effect that gives the Pop series a premium feel.

Add a USB-C port to the front I/O panel using an easily-installable module, available separately.

Related Questions and Answers

Q: 1. Will a Corsair RM850x psi fit in this case?

A: Yes, the Fractal Design Pop Mini Air Case (White) supports ATX power supplies like the Corsair RM850x.

Q: 2. What brand of fans comes with the case?

A: Unfortunately that is not specified. I apologize.

Q: 3. where is the "separate usb c module"?

A: The USB-C cable you would need to active the USB-C ARGB controller would be the USB-C 10Gbps Cable – Model D, which we do not carry, but it can be found using the link below. https://www.fractal-design.com/products/accessories/connectivity/usb-c-10gbps-cable-model-d/

Q: 4. Can a 160mm psu fit In this case

A: That depends on the size of the PSU. The Fractal Design Pop Air Mid-Tower Case (White Tempered Glass, Clear Tint) has a supports ATX size PSUs with a Maximum length of 6.7".

Q: 5. Can I put a full-sized power supply inside?

A: Yes, this model will fit a full size PSU.

Q: 6. How much overhang is there from the front feet to the front of the case?

A: I'm very sorry but Fractal Design does not specify the overhang from the front feet to the front of the case of the Fractal Design Define R5 Mid-Tower Case (Black), B&H # FRCADEFR5BK.

Q: 7. Will a NH-D15 SE cpu cooler fit here?

A: The NH-D15 SE will fit this case.

Q: 8. Can I add an optical drive?

A: Yes, you can add an optical drive.

Q: 9. I just bought this case, does it not have plain orange RGB shown in the image? I can't find it shuffling through the colors.

A: The Fractal Design Pop Air RGB Mid-Tower Case (Orange Core), B&H # FRFDCPOR1A05, includes RGB fans. The images are simply showing it set to an orange color, to match the color scheme, since the interior mounting panel is orange

Q: 10. Would the ASUS Republic of Gamers Strix LC 360 RGB Liquid CPU Cooler work with this case?

A: Yes, this case supports 3 x 120 mm on the top, and front so you could mount the cooler in either place.

Bb	24/08/2024
Great customer service accidently entered the wrong address and they were able to get it changed in a day, Was really worried it would come to my house during work hours but managed to get it it there on my other day off. Customer service was kind and helped me out well and quick. 5

Radi N	21/08/2024
This case is really well thought out, all wires are tucked nicely on the opposite side of motherboard, extra compartment and frontplate have magnets and are easy to remove, design is beautiful and the price is right what more can you ask for? 5

Amanda	17/08/2024
After using this case a while I have to say I love it. It is so much better built and cooled than my old Phanteks Eclipse. The manual made transferring my components from my old case very easy. I love that it keeps the bay for a DVD burner and use that a lot (Probably the only one who does that though). My only complaints are that is a bit loud (But not terrible) and that if I bump the cover over the DVD compartment than it DVD burner I have installed, but other burners may be different. 5

Michael	05/08/2024
I am new to building PC with aftermarket cooler. Needed a wider case for DeepCool AK 620 which fit just fine. Case is very nice and allows more flexibility than I'm used to for cable routing and storage mounting options. Also mounted an optical drive at bottom front. When I put the magnetic cover over the optical drive it hits the button to open the tray. Not a big deal to me. Had a question about plugging 3 pin case fans into 4 pin connectors on motherboard but Fractal never responded to my ticket. Figured it out on YouTube. Would buy again. 5

Alonzo	19/07/2024
The size is great, no clear window, and no USB 3.0 header 5

Cole	13/07/2024
First time builder- found the case to be of great quality, feels very sturdy and well-designed. Very modular and customizable. 5

Wyatt	22/06/2024
Good build quality, plenty of space for cable management. Definitely an great case especially for the good price. Fractal is always a good choice. 5

Jamie	16/06/2024
This case easily took an X570 motherboard. This case comes with 3 120mm 3 pin fans, but they daisy chain. That is rad. The basement of the case is spacious and you can pull the 3.5 bay out and mount in the top of the case! The cable routing is magnificent. The chassis is sturdy and strong. The tempered glass is nice and all case screws are captured. This is a great case 5