The 6’ Lemo FMW to Duplex LC Fiber & 6-Pin AMP Reverse Gender Inline Breakout Cable from Camplex is an internal distribution breakout cable. It is a pre-terminated SMPTE hybrid breakout cable with a LEMO 3K.93C connector feeding out to both duplex LC optical connectors and a reverse gender 6-Pin AMP connector for power. This breakout series cable is UPC machine polished to meet all SMPTE 304M/311M standards.

This composite cable integrates the control line, and optical fiber for video and audio transmission. The cable is standardized by SMPTE for HDTV broadcast camera use. It consists of 2 single-mode optical fibers, four 20 AWG and two 24 AWG tinned copper conductors cabled around a steel strength element, with an overall tinned copper braid. This general purpose cable is used for studios and light to medium field use. A flexible PVC blend jacket allows for ease of use within the studio.

Assembled with SMPTE cable & LEMO and Senko connectors

Industry standard cable

Terminations by LEMO trained technicians

Electrical assemblies 100% tested for continuity and short circuits

Fiber optic assemblies 100% tested for attenuation and back reflection

SMPTE 311M and 304M compliant

Stainless steel assemblies

Rubber dust caps

19.4 Mb/s to 3 Gb/s transport rate

Machine polished fiber contacts

Low insertion and return loss

Related Questions and Answers

Q: 1. So when you get this xlr breakout cable and connect it to a atomos ninja flame you still get the quality of xlr microphone ? since the ninja flame just the have the xlr input?

A: Hello Shopper, the Lemo type connector is only for the Shogun units such as the Shogun, Shogun Flame and soon to be Shogun Inferno. The Ninja Flame uses a 3.5mm audio jack.

Q: 2. Can this power Teradek or SmallHD from the 2-pin 12v on the Alexa 35 camera? I've heard polarity of cables vary by brand.

A: When using the 2-pin 12v power output on the ARRI Alexa 35 camera, it can power devices with 2A of power. It would depend specifically which Teradek or SmallHD unit would need to be powered, as some require more capacity, however, the Tilta 2-Pin to 2-Pin LEMO Cable (23-), would be appropriate for 12v 2A devices.

Q: 3. Is this compatible with the Shogun Inferno?

A: Hi,This provides 2 in and 2 loop out XLRs, there is also a version with just 2 inputs.It is compatible with the original Shogun, Shogun Flame, Shogun inferno and Ninja inferno.

Q: 4. Can this work to power the Small HD cine7 monitor? I see someone has asked about indie7 but just wanted to check. I know they list it as for something teradek cube, etc. but what makes it different that it wouldn't work on the cine7?

A: This cable can power the SmallHD Cine 7 monitor. 2-pin LEMO cables are cross compatible with different brands that have a 2-pin LEMO port.

Q: 5. Will this breakout cable work with the Atomos Assassin?

A: Hi,This Audio break out is just for the Shogun range of Products. The Ninja Assassin only has a line live 3.5mm Jack in put.

Q: 6. Does this work with Teradek Bolt?

A: The 2-pin LEMO works, but it's all contingent on where you are connecting it to and making sure that proper voltage is being sent through to avoid damage.

Q: 7. Can I use this on Mini LF to teardek Bolt TX?

A: Yes, the Tilta 2-Pin LEMO-Type to 3-Pin Fischer-Type Cable can be used with the 24-volt 3-pin Fischer output on the ARRI ALEXA Mini LF and Lens Mount Set (LPL) into the 2-pin power input on the Teradek Bolt 4K XT Transmitter.

Q: 8. How long is this cable?

A: The manufacturer does not specify this information and since this is a brand new item, which we currently do not stock yet, we have no possibility of physically verifying this at this time.

Q: 9. Will this work with the Ninja Inferno as well?

A: Hello Cory S, yes it will, it is the same connector type

Q: 10. Does Atomos or anyone make a 90 degree version of this cable?

A: Hello Jason P, unfortunately we do not no.