Offering improved weather and UV resistance, the Polymaker 1.75mm PolyLite ASA Filament, allowing you to create items for real-life applications for outdoor use.

Designed as an alternative to ABS filament, ASA enables you to create a wide range of items with enhanced mechanical properties while printing with a matte finish. PolyLite ASA has a printing speed range between 30 to 50mm/s and a printing temperature range of 464 to 500°F as well as a bed temperature range of 167 to 203°F. This filament supports direct and indirect drive systems with a retraction distance and speed of 1mm at 20mm/s and 3mm at 40mm/s, respectively. If you are printing a creation bigger than your fist, an enclosure is highly suggested.

1.75mm Diameter    1kg Weight    30-50mm/s Printing Speed Range    464-500°F Print Temperature Range    167-203°F Bed Temperature Range    Direct & Indirect Drive Compatible

Related Questions and Answers

Q: 1. With this kit I need to also have the booster antenna connected or can I use it without the booster antenna?

A: The Sennheiser G4 EW-D ASA Active Antenna Splitter Bundle 5 Kit includes the Sennheiser EW-D ASA 4-Way Active Antenna Splitter with DC Distribution for EW-D Wireless Systems (470 to 694 MHz) with the Sennheiser GA 3 Rackmount Kit for EW G3 and G4 Series Wireless Receivers, and two Sennheiser ADP UHF Passive Directional Antenna for EW-D Wireless Systems (470 to 1075 MHz). This set up is intended for use with up to four wireless receivers, without the need for any other antennas.

Q: 2. Is there a speed ring that can connect this to a Broncolor Siros L?

A: There is not a way to attach the Profoto Magnum. Broncolor has there own similar reflector https://bhpho.to/2Ltvi2E.

Q: 3. This kit does not include the ASA 214 but actually comes with the ASA EW-D. Can the ASA EW-D be used with the EW 100 G4 receivers?

A: Yes, the ASA EW-D is backwards compatible and will work with all previous Sennheiser Evolution wireless receivers including the EW 100 G4.

Q: 4. This is backwards compatible with G4 systems right? I know that you need this for the EW-D series, but from what I'm reading this unit will work to combine existing G4 or G3 units as the previous model did as well...Right?

A: Yes, the Sennheiser EW-D ASA 4-Way Active Antenna Splitter with DC Distribution for EW-D Wireless Systems (470 to 694 MHz) is backwards compatible for use with the Sennheiser EW G3 and EW G4 series wireless receivers.

Q: 5. Can I use this system with the 1/4'' and 1/2'' antennas? I don't really need the very big antennas. Thank you

A: You can use B&H # SEHALFWAVEDQ for compatibility with the Sennheiser EW-D ASA.

Q: 6. Will this work for the EW-DX systems? The description says ED-D.

A: Yes, the Sennheiser EW-D ASA 4-Way Active Antenna Splitter with DC Distribution for EW-D Wireless Systems is compatible for use with Sennheiser EW-DX EM 2 Two-Channel Digital Rackmount Receivers. The EW-DX EM Receiver is the two-channel version of the EW-D Receiver, which is singe-channel.

Q: 7. What is the diameter of the face? 16 ? I wish the specs for Profoto listings were more informative -- looking for actual dimensions so I can choose mods that fit in my travel case (I know this Magnum won't fit in my pelican, but just a general compaint ;)

A: The face diameter is 13.5 inches and is 10.5 inches high.

Q: 8. Bundle 5 says, "It also provides DC power to the four receivers, for less clutter in your rack." Is this true? How?

A: The EW-D ASA is able to provide power to connected receivers via the BNC antenna connectors.

Q: 9. Does the Roam 2 need to be connected via WiFi for the Sonos app to control it? Can you use Bluetooth?

A: Yes, the Sonos Roam 2 (Black), B&H #SOROAM2BK, must be connected via Wi-Fi for you to be able to control it with the Sonos App.

Q: 10. Does the Roam 2 work with Arc Soundbar?

A: The Sonos Roam 2 can only pair with other Sonos Roam 2 units.