Featuring a sleek design, the UFiber Wi-Fi 6 GPON CPE from Ubiquiti Networks is designed to deliver reliable point-to-multipoint connections with Gigabit Passive Optical Network (GPON) fiber lines. This CPE device features an SC/APC type GPON WAN connector with up to 2.4 Gb/s downstream and 1.2 Gb/s upstream speeds, supporting up to 12.4-mile physical GPON links.

There are also four RJ45 Gigabit Ethernet ports for connecting wired devices in addition to support for 802.11ax Wi-Fi, which can wirelessly transfer up to 1500 Mb/s over the 2.4 and 5 GHz bands with compatible devices. The UFiber Wi-Fi 6 GPON CPE can be powered using the included AC adapter or through passive PoE when connected to a compatible network switch. A wall-mounting kit is included and the device may be managed through the UISP application.

Wi-Fi 6 (802.11ax)    Up to 1500 Mb/s Wireless Throughput    4 x Gigabit Ethernet LAN Ports    1 x SC/APC GPON WAN Port    Up to 2.4 Gb/s Down / 1.2 Gb/s Up WAN    Supports up to 12.4-Mile GPON Links    Powered by PSU or Passive PoE    Supports UISP Application

Related Questions and Answers

Q: 1. Can this product be installed in a dry location on a screened porch?

A: The Ubiquiti Networks UniFi IW HD In-Wall Wi-Fi Access Point BH #UBUAPIWHDUS is designed for indoor use but it might be ok if you are sure it will be dry and it won't be exposed to direct sunlight. It is rated to work at: Operating Temperature: -10 to 60° C (14 to 140° F) Operating Humidity: 5 to 95% Noncondensing

Q: 2. Does this come with the circular plastic attachment that connects to a nano beam that goes over the pole mount?

A: All parts of the Ubiquiti Networks Quick-Mount for Ubiquiti CPE Devices can be seen in this image: https://bhpho.to/48seqze

Q: 3. Do I get it right that I can run the app controller software on a PC on the same network as the AP?

A: Yes, it is possible to run the Unifi software on a pc with this Ubiquiti Networks UniFi U6+ Dual-Band Wi-Fi 6 Access Point on the same network. However, it is not recommended. Use the Ubiquiti Networks UniFi Cloud Key Gen2 Plus, BH #UBUCKG2PLUS for the best results.

Q: 4. Can this device be used to replace the Nokia Gpon terminal that was provided by my ISP?

A: Not knowing the specs and combability of your Nokia GPON hard to confirm, but this device will let you share a high-speed Fiber connection with Gigabit-enabled devices. This device does have a return policy of 30 day if it does not work for you.

Q: 5. Can this unit be mounted outside on a pole? Does it come with the bracket to do so?

A: This is a in-wall, indoor unit. It is not rated for use outdoors or on a pole.

Q: 6. Will this work with the u6 lite

A: No, as per the manufacture the Ubiquiti Networks Quick-Mount for Ubiquiti CPE Devices is compatible with the NBE-2AC-13, NBE-M5-16, UBB, or GBE using the Universal Ball Mount, NBE-5AC-Gen2 or NBE-M5-19 using the Universal Ball Mount and Metal Washer, loco5AC, NS-5AC, or LTU-Lite using the Ball Mount Assembly.

Q: 7. What color is the finish?

A: The Ubiquiti Networks UniFi IW HD In-Wall Wi-Fi Access Point;'s main finish is white while the sides have a silver/aluminum finish.

Q: 8. will this work with Xfinity XB-8 modem ?

A: The Ubiquiti Networks UniFi U6+ Dual-Band Wi-Fi 6 Access Point can be used as an access point with the Xfinity XB-8.

Q: 9. How does it work? ...in layman terms

A: Takes in a wired internet connection and broadcasts it out via Wi-Fi. It is setup with an IOS or Android App. Becomes a hotspot.

Q: 10. Does this AP require that you use a Unifi Router? Or can you use it with an existing system using another router?

A: The Ubiquiti Networks UniFi IW HD In-Wall Wi-Fi Access Point BH #UBUAPIWHDUS can be used with any brand of router.