PolyMax PLA from Polymaker is designed as an easy-to-print filament with improved mechanical properties. Part of the PolyMax family of 3D printing filaments, PolyMax PLA is produced with Polymaker's Nano-reinforcement technology to deliver exceptional mechanical properties and printing quality.

PolyMax PLA is compatible with most of the 3D printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more.

PolyMax PLA also features Polymaker's Jam-Free technology, which improves the heat stability of the filament with softening temperatures over 284°F. As a result, the filament shows minimal softening in the cold end and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams.

Please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.3.1 printer.

Designed As Easy-to-Print Filament    Nano-Reinforcement Technology    Improved Mechanical Properties    750g Weight Accuracy    374 to 446°F Print Temperatures    40 to 60mm/s Print Speeds

374 to 446°F

40 to 60mm/s

77 to 140°F

Glass, Blue Tape, BuildTak

On

Related Questions and Answers

Q: 1. Will this work for the Leica Q typ 116? Thank you

A: Yes, the Leica Strap (Olive Green) is compatible with the Leica Q (Typ 116) camera.

Q: 2. How long is the strap?

A: The Leica Strap (Black) BH #LESRB • MFR #24035 can be adjusted to three different lengths: 43 inches, 46.5 inches and 48 inches (109cm, 118cm, 123cm).

Q: 3. can owners comment on the effectiveness of the firmware fix for overheating?

A: Users have reported 40% increases in overall battery performance with the new firmware and no major issues with overheating.

Q: 4. Are still images 23 mp raw capture?

A: Yes. The GoPro Hero 10 will produce 23mp RAW still images when shooting in default photo mode.

Q: 5. Can I use the Joby Ultraplate on this ball head

A: Yes that plate will work on the Joby Ballhead X.

Q: 6. Does the GoPro w/media mod output clean HDMI for a small video switcher (like new Atomos Ninja option), and if so - what resolution?

A: The GoPro Hero 10 with Media Mod will provide a clean hdmi out at 1080P/60fps. The below link will provide a list of supported resolutions. https://community.gopro.com/t5/en/Media-Mod-HDMI-Output/ta-p/585539

Q: 7. Is there a mic output for wireless lavalier?

A: The following adapter is what you would need for a Mic output on this GoPro Hero10. https://www.bhphotovideo.com/c/product/1274435-REG/gopro_aamic_001_3_5mm_mic_adapter.html BH #GO35MA • MFR #AAMIC-001

Q: 8. Will this work for q2?

A: Yes, the Leica Strap (Black) will work on the Leica Q2 Digital Camera. However, the dedicated trap for the Leica Q2 Digital Camera is the Leica Q2 Carrying Strap (Black), B&H # LEQ2CSB.

Q: 9. Can i use hypersmooth whilst loop recording?

A: With the Hero 10 Black, one can use hypersmooth with loop recording.

Q: 10. will go pro 7 black accessories fit this or has it changed physically since the 7 was released?

A: The Gopro Hero Hero 7 black accessories will also work for the GoPro Hero 10