SecuriTEST IP from Simply45 is an installation and troubleshooting tester for digital/IP, HD coax and analog CCTV camera systems with a 7" touchscreen display. With a single tester that can power, configure, and document, SecuriTEST IP increases productivity from start to finish. Connect to various cameras using the RJ45 and BNC ports or Wi-Fi network capabilities.

Power the camera with 12V from the lithium-ion battery or PoE+. QuickIP function allows for faster camera login. Setup the camera with aim, focus, PTZ, presets, and network settings. Provide proof of installation with PDF reports that show camera parameters and multiple video screenshots. Eliminate guesswork with data cable and network troubleshooting tools.

RJ45, BNC, Wi-Fi Camera Connections    Comprehensive Camera Setup    Troubleshooting Tools, Cable Tracing    PDF Reports, 7" Touchscreen

• Connect to any IP or analog camera using the RJ45 and BNC connections or Wi-Fi
• Supports power requirements with PoE+ up to 24W or 12 VDC via barrel connector

• QuickIP automates process of connecting to IP cameras
• Built-in DHDCP server makes setup easy and eliminates need for additional network hardware
• Network troubleshooting tools available to pinpoint and solve connectivity issues

• Offers comprehensive range of ONVIF and non-ONVIF camera setup tools to ensure camera is installed correctly
• Configure camera and update its information and network settings
• Use high-resolution touchscreen or keys to aim and focus
• Program PTZ presets
• Save video snapshots for installation reports
• Record video clips to demonstrate coverage

• Easily install analog and HD cameras
• Adjust video settings and PTZ protocol
• Test pattern generator to adjust screens

• Transfer reports from the job site using the built-in Wi-Fi and web browser
• Send to tester via email, file sharing, or export to microSD card
• Capture camera images, network configuration, and automated documentation
• Reduce troubleshooting on future callbacks
• 18GB combined storage: 10GB internal memory, 8GB on microSD

• Use in combination with cable tracer tool to pinpoint cabling faults like cross overs, miswires, shorts, and opens
• Length of cabling provided
• Determine water ingress in data cabling to prevent performance issues

• Identify and trace cables with digital tone generator and cable tracer tool
• Variable sensitivity settings trace large cable bundles from a distance or pinpoint single cable within a bundle

Related Questions and Answers

Q: 1. Hoping to verify that the jack on the side is for accepting 1/4 (6.35 mm) . It doesn't actually say it in the specs.

A: I can confirm the Kopul CBT-8 8-in-1 Cable Tester can accept 1/4" TRS/TS connections to test continuity.

Q: 2. Can I control this camera from an off site remote location using the IP address? or does the controller need to be physically attached to the unit?

A: IP control allows you to control the camera from any location where you can be connected to the same network.

Q: 3. can it test up to 1,000 Mb/s?

A: The Greenlee NC-100 NETcat Micro Wiring Tester will not test up to 1,000 Mb/s.

Q: 4. Can this receive a 1080i signal over sdi or is it limited to 1080p30?

A: The Tote Vision 7" Ruggedized Multifunction Test Monitor for IP/Analog Camera is not compatible with 1080i signals.

Q: 5. Will this mount on a ceiling?

A: Yes, that is possible as this camera will have an image flip mode.

Q: 6. Some speaker cables have a banana plug on one end and a TS connector on the other. Are the banana connections on this tester able to accept this type of connector so you can test this type of speaker cable?

A: The banana plug inputs on the unit are specifically made to connect the included probes, which can then be used to test continuity with any type of cable connector.

Q: 7. The Specs show that this waveform only accepts 3G via SDI. Is 12G reserved via IP only?

A: The Leader LV-5600 Waveform Monitor - SDI and IP Signals accepts SD-SDI, HD-SDI, 3G-SDI, 6G-SDI, 12G-SDI single link, 3G-SDI dual link and quad link, HD-SDI quad link via SDI, and 10G/25G via IP.

Q: 8. Can I use my ATEM Mini Pro ISO to control the PTC on this camera?

A: No it can not. The ATEM Mini Pro is only able to control Blackmagic Cameras. We recommend purchasing controllers made by the Manufacturer of the PTZ camera (in this case AIDA) to get the best experience with camera control.

Q: 9. What is a good general purpose microphone for this camera?

A: Following unit does not adapt to audio.

Q: 10. Is this camera outdoor rated?

A: Unfortunately, no. It would be best to use a universal cover like this one: PortaBrace Universal Waterproof Rain Slick Cover for PTZ Cameras https://www.bhphotovideo.com/c/product/1348634-REG/porta_brace_qrs_ptz_a_universal_water_proof.html