The Rotating Commercial Studio Camera Stand from STUDIO TITAN AMERICA is designed for commercial photography and optical measurement systems. It features a center column height reaching 94.4" and a horizontal arm width of 39.3". The base is heavily weighted for added stability. The stand provides additional reinforcement of the horizontal arm/bar with a heavy-duty interface plate. The plate provides two additional bolts strategically located, one on each side of the vertical carriage, for a total of four bolts. This design provides additional load support and spreads the load forces from the horizontal arm into both the front and the sides of the vertical carriage. This stand is categorized as 3-axis. It provides vertical, horizontal, and rotary movement of the camera. Vertical travel is provided by the vertical carriage. Horizontal arm/bar extension is provided by the horizontal carriage. The vertical carriage design incorporates a rotary carriage that allows the horizontal arm to freely rotate 360 degrees around the vertical column while the base remains stationary. The camera head mount plate is adjustable from 0 to 360 degrees around the horizontal bar/arm.

Heavily Weighted    Low Center of Gravity    Precision-Manufactured CNC Machinery    Foot-Operated Brake Plungers    Horizontal Arm Freely Rotates 360°    3-Axis Stand    Adjustable Camera Head Mount Plate    Horizontal Arm/Bar

User-positioned vertical carriage and horizontal arm/bar carriage with precision smooth-motion ball bearings and a secure axis lock with one user brake knob.

User-positioned rotary carriage allows the horizontal arm to freely rotate 360°, around the vertical column while the base remains stationary. Smooth motion bearing and secure axis lock with one user brake knob.

Precision manufactured with attention to detail using CNC machinery.

Counterweight located inside the vertical column balances the load and allows single-handed operation.

Low center of gravity base with foot-operated brake plungers that provide quick operation and prevent movement on flat surfaces.

Premium dual-stage bearing casters provide easy movement around the studio. The dual-stage foot brake stops both the wheel from rotating and the caster housing from swiveling, preventing unwanted movement.

A unique feature not found on other studio stands is the vertical and horizontal column graduated tape scales. The measuring scales provide a point of reference that allows the photographer to log and then quickly recreate a previous setup.

Some assembly is required; it includes essential tools required to complete the assembly.

Related Questions and Answers

Q: 1. Do both sections go up / down as the handle is cranked or just the lower section?

A: The STUDIO TITAN AMERICA 06-200 Low Base Square Tube Geared Crank Stand (6.8') lower section is the one that moves with the crank.

Q: 2. What is the folded length?

A: The stand is 44-inches when folded up, but the boom portion is 82-inches. If you are looking for a more mobile option that collapses to a smaller size, you may consider the Impact Multiboom Light Stand and Reflector Holder (13'), BH #IMLSRH. This light stand is only 40-inches when folded up, and can be used as a mic boom, with the addition of a thread adapter, such as the Impact Female 1/4"-20 to Male 3/8"-16 Thread Adapter, BH #IMCA109.

Q: 3. With this stand can I get my light down to the floor? because I know you can do it with the column stand, but I don't have enough height in my studio for that stand

A: Minimum working height is 42.5".

Q: 4. Could this be mounted to the back of a desk, or does it need to be mounted to either side of the desk as shown in the photos?

A: The mounts of the Ulanzi Multifunction Photo Studio Stand BH #UL2957 could be rotated to mount the the back of a desk.

Q: 5. What are the diameters of the sections?

A: As per the manufacturer, the diameters of each section are as follows: 52mm, 48mm, 44mm, 41mm, 37mm, 34mm, and 31mm.

Q: 6. Can I buy the dual pistol grip or can I buy pistol grips separately?

A: There is no dual pistol grip made for that camera stand. And they can not be purchased separately to be used together.

Q: 7. Is it possible to attach to say a light stand or a tripod base if one wanted to not use the clamps?

A: The clamp stands in the Ulanzi Multifunction Photo Studio Stand BH #UL2957 are designed for use on a table or similar surface. They are not compatible with a light stand or tripod.

Q: 8. Is the pole in sections so that it can be used at different heights or is it just an 8' length?

A: The Studio Titan's column comes in two sections (lower and upper, combined with grub screws) to form a 8' stand, and you raise and lower the device mounted to its platform using the pistol grip.

Q: 9. what is the circumference of the pole in order to install a super clamp with a right angle arm to hold a light?

A: The shaft diameter is 35mm or 1.37 inches, therefore a Super Clamp can definitely fit around it.

Q: 10. Can the tripod head be changed out?

A: Unfortunately, the tripod head is fixed on the SA1241.